Browsing by Author "Deniz, Mehmet Emin"
Now showing items 1-20 of 29
-
3-Nokta eğilme yüklemesine maruz bırakılmış ortasında delik bulunan kompozit plakların yorulma öncesi ve yorulma sonrası davranışı
Deniz, Mehmet Emin (İksad Yayınevi, 2019-02-18)Bu çalışma, ortasında farklı çaplarda delik bulunan E-cam/epoksi örgülü kompozit plakların yorulma öncesi ve sonrası üç nokta eğilme davranışlarını belirlemek için tasarlanmıştır. Tüm numuneler, ASTM D790-92 standardına ... -
Al-cam/epoksi hibrit kompozit tabakaların yorulma öncesi ve yorulma sonrası davranışı
Deniz, Mehmet Emin (İksad Yayınevi, 2019-02-18)Bu deneysel çalışmada, al-cam/epoksi esaslı GLARE-2 hibrit kompozit tabakaların yorulma öncesi ve sonrası çekme davranışları araştırılmıştır. Hibrit malzemenin davranışı üzerine yorulma çevrimlerinin etkisini belirlemek ... -
Aramid/epoksi kompozit plakların burkulma dayanımı üzerine delaminasyon geometrisi ve yerinin etkisi
Deniz, Mehmet Emin; Oral, Nevra (İksad Yayınevi, 2019-02-18)Bu deneysel çalışma, [±45o ]4 aramid/epoksi esaslı kompozit plakların kritik burkulma yükleri üzerine delaminasyon geometrisi ve yerinin etkisini belirlemek için yapılmıştır. Bunun için delaminasyonlu ve delaminasyon ... -
Bal peteği ve beton çekirdek malzemesine sahip cam/epoksi ve karbon/epoksi kompozit tüplerinin bası davranışı
Deniz, Mehmet Emin; Altın, Mehmet Beşir (Dokuz Eylül Üniversitesi, 2021-01-15)Bu deneysel çalışmada, [-45°/+45°]4 ve [0°/90°]4 gibi iki farklı dizilim açısına sahip cam/epoksi ve karbon/epoksi kompozit kare tüplerin K25Y30, K50Y60 ve K100Y120 olarak üç farklı boyutta elle yatırma yöntemi kullanılarak ... -
Beton ve balpeteği çekirdek malzemesine sahip karbon/epoksi ve cam/epoksi tüplerinin bası davranışı
Altın, Mehmet Beşir (Batman Üniversitesi Fen Bilimleri Enstitüsü, 2019-08-21)Bu tez çalışmasında, üç farklı hücre boyutuna (25 mm, 50 mm, 100 mm), üç farklı hücre yüksekliğine (30 mm, 60 mm, 120 mm) ve iki farklı elyaf oryantasyon ([-45°/+45°]4 ve [0°/90°]4) açısına sahip cam/epoksi ve aynı hücre ... -
Buckling analysis of laminated composite plates with a central hole in different geometric shapes
Deniz, Mehmet Emin (Fırat Üniversitesi, 2017)In this study, the buckling behaviors of E-glass/epoxy composite plates with a central hole in different geometric shapes for different boundary conditions will be analyzed. For the analyzes, ratio between thickness and ... -
Determination of fatigue life of the unidirectional GFRP/Al hybrid composite laminates
Deniz, Mehmet Emin; Aydın, Fırat (Elsevier, 2019-06)This paper investigates the effects of loading rate and fiber orientation on the fatigue behavior of the unidirectional glass-fiber reinforced-plastic/aluminum (GFRP/Al) hybrid laminated (GLARE-2) plates. Fatigue tests ... -
Determination of fatigue life of the unidirectional GFRP/Al hybridcomposite laminates
Deniz, Mehmet Emin; Aydin, Fırat (Elsevier, 2019-06-01)This paper investigates the effects of loading rate andfiber orientation on the fatigue behavior of the uni-directional glass-fiber reinforced-plastic/aluminum (GFRP/Al) hybrid laminated (GLARE-2) plates. Fatigue testswere ... -
Effect of hole geometry and matrix material on buckling behavior of composite plates
Deniz, Mehmet Emin (Fırat Üniversitesi, 2017)In this study, the buckling behavior of E-glass/epoxy, E-glass/polyester and E-glass/vinylester based composite plates with fiber orientation of [0o /90o ] 4 will be determined experimentally. Test specimens prepared ... -
Effect of seawater on pin-loaded laminated composites
Deniz, Mehmet Emin; Karakuzu, Ramazan; Kanlıoğlu, Halit (De Gruyter, 2018-01)The aim of this study was to investigate the effect of seawater on bearing strength of glass-epoxy laminated composites. The ratio of the edge distance to pin diameter (E/D) was changed from 1 to 5 and that of the specimen ... -
Effects of specimen dimensions and impact energy on energy absorption and damage of glass/epoxy composite plates
Deniz, Mehmet Emin; Karakuzu, Ramazan; Algan, Berk (De Gruyter, 2019-02-21)In this study, the impact response of laminated composite plates of various specimen dimensions under various impact energies has been investigated, experimentally and numerically. Glass/epoxy composites with [02/902/02/902]s ... -
Environmental effect on fatigue life of glass–epoxy composite pipes subjected to impact loading
Deniz, Mehmet Emin; Karakuzu, Ramazan; Özen, Mustafa; Özdemir, Okan; İçten, Bülent Murat (Elsevier, 2013-01)The main objective of this experimental study was to investigate the effects of seawater and impact loading on the fatigue life of glass–epoxy composite pipes under cyclic internal pressure. The pipes were produced by ... -
Environmental effects on mechanical properties of glass-epoxy composites
Deniz, Mehmet Emin; Karakuzu, Ramazan; Kanlıoğlu, Halit (De Gruyter, 2014-05)This study presents the effects of seawater and distilled water immersion time periods on mechanical properties of unidirectional glass reinforced epoxy composites. Tension, compression, and shear test specimens exposed ... -
Failure pressure and impact response of glass-epoxy pipes exposed to seawater
Deniz, Mehmet Emin; Özdemir, Okan; Özen, Mustafa; Karakuzu, Ramazan (Elsevier, 2013-06-13)In this paper, the effect of seawater on failure pressure and impact behaviors of polymer-matrix composites (PMCs) was investigated, experimentally. E-glass fiber and epoxy resin-based composite pipes consist of six layers ... -
Impactor diameter effect on low velocity impact response of woven glass epoxy composite plates
Deniz, Mehmet Emin; İçten, Bülent Murat; Gören Kıral, Binnur (Elsevier, 2013-07)In this study, the effect of impactor diameter on the impact response of woven glass–epoxy laminates has been investigated. Impact tests were performed by using Fractovis Plus test machine with four different impactor nose ... -
Investigation of the effect of different variables on strength of adhesive joints
Adin, Hamit; Deniz, Mehmet Emin (WILEY, 2014-10-01)In this article, the tensile strength of different adhesive bonded joints under a tensile load was analyzed numerically. The effects of certain parameters, including the bonding length and bonding ratio, were investigated. ... -
İçinde delaminasyon bulunduran tabakalı kompozit plakların burkulma davranışlarının araştırılması
Deniz, Mehmet Emin; Oral, Nevra (İksad Yayınevi, 2018-01-10)Zaman içerisinde gelişen teknolojinin ihtiyaçlarına cevap veremeyen, bilinen malzemelerden dolayı teknoloji gelişimi sınırlanmıştır. Bu sebepledir ki bilim insanları yeni malzemeler bulma konusunda çalışmalar yaparak, ... -
İçinde delaminasyon bulunduran tabakalı kompozitlerin burkulma davranışlarının deneysel ve nümerik araştırılması
Oral, Nevra (Batman Üniversitesi, 2018-05)Zaman içerisinde gelişen teknolojinin ihtiyaçlarına cevap veremeyen, bilinen malzemelerden dolayı teknoloji gelişimi sınırlanmıştır. Bu sebepledir ki bilim insanları yeni malzemeler bulma konusunda çalışmalar yaparak, bu ... -
Ortasında delik bulunan eğrisel yüzeyli kompozit plakların burkulma davranışı
Deniz, Mehmet Emin (Dicle Üniversitesi, 2017-03-01)Bu çalışmada, [±60o ]2 ve [±75o ]2 oryantasyon açılarına sahip E-cam/epoksi esaslı eğrisel yüzeyli kompozit plakların burkulma davranışı deneysel olarak araştırıldı. Malzeme olarak ±60o ve ±75o elyaf açısında filament ...