Advanced Search

Show simple item record

dc.contributor.authorÇelik, Yahya Hışman
dc.contributor.authorKılıçkap, Erol
dc.contributor.authorKılıçkap, Ali İmran
dc.date.accessioned2019-06-27T05:47:30Z
dc.date.available2019-06-27T05:47:30Z
dc.date.issued2019-01-31en_US
dc.identifier.citationÇelik, Y. H., Kılıçkap, E., Kılıçkap, A. İ. (2019). An experimental study on milling of natural fiber (jute)- reinforced polymer composites. Journal of Composite Materials, pp. 1-11.002199831982637. https://doi.org/10.1177/0021998319826373en_US
dc.identifier.issn0021-9983
dc.identifier.issn1530-793X
dc.identifier.urihttps://doi.org/10.1177/0021998319826373
dc.identifier.urihttps://hdl.handle.net/20.500.12402/2139
dc.description.abstractThe interest in materials having natural, environmentally friendly, renewable and low density/cost is increasing day by day due to sanctions imposed to reduce the emission rates, especially the Kyoto Protocol. In recent years, the use of environmentally friendly composites by using natural fibers such as flax, jute and sisal has increased in engineering applications. Milling operation has frequently been an important method of machining which can achieve the desired dimensions and tolerances for the plate-shaped parts. In this study, the effects of cutting parameters such as cutting speed and feed rate on cutting force, delamination factor and surface roughness in end milling of jute fiber-reinforced polymer composite plates with different orientation angle (0°/90°, 30°/−60° and ±45°) were examined by using the cemented carbide (WC) end mills (two, three and four number of flutes). Cutting force, deformation factor and surface roughness were found to be influenced by the feed rate and cutting speeds. In addition, increasing the number of the flutes of the cutting tools reduced the cutting force, delamination factor and surface roughness.en_US
dc.language.isoengen_US
dc.publisherSAGEen_US
dc.relation.isversionof10.1177/0021998319826373en_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.rightsAttribution-NonCommercial-ShareAlike 3.0 United States*
dc.rights.urihttp://creativecommons.org/licenses/by-nc-sa/3.0/us/*
dc.subjectCompositesen_US
dc.subjectCutting Forcesen_US
dc.subjectDelaminationen_US
dc.subjectEnd Millingen_US
dc.subjectJuteen_US
dc.subjectSurface Roughnessen_US
dc.titleAn experimental study on milling of natural fiber (jute)- reinforced polymer compositesen_US
dc.typearticleen_US
dc.relation.journalJournal of Composite Materialsen_US
dc.contributor.departmentBatman Üniversitesi Mühendislik - Mimarlık Fakültesi Makine Mühendisliği Bölümüen_US
dc.contributor.authorID0000-0003-1753-7712en_US
dc.identifier.startpage1en_US
dc.identifier.endpage11en_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record

info:eu-repo/semantics/closedAccess
Except where otherwise noted, this item's license is described as info:eu-repo/semantics/closedAccess