Beton ve balpeteği çekirdek malzemesine sahip karbon/epoksi ve cam/epoksi tüplerinin bası davranışı
Citation
Altın, M. B. (2019). Beton ve balpeteği çekirdek malzemesine sahip karbon/epoksi ve cam/epoksi tüplerinin bası davranışı. (Yayınlanmamış Yüksek Lisans Tezi). Batman Üniversitesi Fen Bilimleri Enstitüsü, Batman.Abstract
Bu tez çalışmasında, üç farklı hücre boyutuna (25 mm, 50 mm, 100 mm), üç farklı hücre
yüksekliğine (30 mm, 60 mm, 120 mm) ve iki farklı elyaf oryantasyon ([-45°/+45°]4 ve [0°/90°]4) açısına
sahip cam/epoksi ve aynı hücre boyutu ve yüksekliği ile üç farklı oryantasyon ([-45°/+45°]4, [-60°/+60°]4
ve [0°/90°]4) açısına sahip karbon/epoksi kompozit kare tüplerin üretimi el yatırma yöntemi ile
gerçekleştirilmiştir. Üretilen kompozit tüpler için çekirdek malzemeler (dolgu malzemeleri) alüminyum
balpeteği (honeycomb) ve C25 sınıflı hazır beton kullanılmıştır. Tez çalışmasının amacı, kompozit kare
tüplerin eksenel bası davranışı üzerine numune boyutu, elyaf malzemesi tipi, oryantasyon açısı, çekirdek
malzemesi gibi parametre etkilerinin deneysel belirlenmesidir. Deneyler, 250 kN yük kapasiteli Shimadzu
marka üniversal test cihazı kullanılarak oda sıcaklığında gerçekleştirilmiştir. Deney sonrası kompozit kare
tüplerde oluşan deformasyon aşamaları şekillerle yorumlandı, çekirdek malzemelerin yapısal ve dayanım
özelliklerinin bası davranışı üzerindeki etkileri araştırıldı. Tüm parametreler için elde edilen sonuçlar,
kendi içinde ve birbirleriyle karşılaştırıldı. Farklı numune boyutları ve malzeme türlerine sahip, değişik
dolgu türleri kullanılarak üretilen kompozit tüplerin çok amaçlı şekillerde kullanılabileceğini, kompozit
tüplerin fiziksel, kimyasal, mekaniksel özelliklerinin karakterize edilebileceğini, kompozit yapıların
direncinin artırabileceğini, bu yapıların uygulama performanslarını optimal duruma getirilebileceğini
göstermektedir. In this thesis study, glass/epoxy composite square tubes with three different cell size (25 mm, 50
mm, 100 mm), three different cell height (30 mm, 60 mm, 120 mm) and two different fibre orientation ([-
45°/+ 45°]4 and [0°/90°]4) and carbon/epoxy composite square tubes with the same cell size and height
and three different orientation ([-45°/+45°]4, [-60°/+60°]4 and [0°/90°]4) have been carried out
manufacturing using the Hand Lay up Method. For produced composite tubes, core materials (fillers)
aluminum honeycomb (honeycomb) and C25 class ready-mix concrete were used. The aim of the thesis
study is to determine the effects of experimental parameters such as specimen size, fiber material type,
orientation angle and core material on the axial compression behaviour of composite square tubes. The
experiments was carried out using 250 kN load capacity Shimadzu brand universal testing machine at
room temperature. After experiments, deformation shapes of composite square tubes was interpreted by
figures. Also, the effects of the structural and strength properties of the core materials on the compression
behavior of the specimens are investigated. For all parameters, the obtained results were compared in
itself and with each other. Composite tubes with different specimen sizes and material types have
produced using different fill types in ways that can be used for many purposes, can be characterized by
the properties of the physical, chemical, mechanical, can increase the resistance of composite structures
and can be brought optimal application performance of these structures, can be seen.
The following license files are associated with this item: