Browsing Mühendislik-Mimarlık Fakültesi Makine Mühendisliği Bölümü Makale Koleksiyonu by Category "Makale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı"
Now showing items 1-20 of 198
-
An analysis of biodiesel requirement, production and policies in Turkey
(e-Journal of New World Sciences Academy, 2008-02-01)The development of alternative fuels from renewable resources, like biomass, has gained considerable attention in recent years. A biodiesel program would give many benefits in terms of generation of employment for ... -
Analysis of combustion characteristics of a LHR-STD diesel engine fuelled with biofuel and diesel fuel
((SSRG-IJTE), 2017-04)It is important to efficiently use of alternative fuel in CI (compression ignition) engine, because of the lack of energy shortages will be in the present and coming years. Therefore this study, the top surfaces of the ... -
Analysis of combustion, performance and emission characteristics of a diesel engine using low sulfur tire fuel
(Elsevier, 2015-03-01)An alternative fuel for diesel engines was produced from waste vehicle tires by the method of pyrolysis. In order to reduce sulfur content of produced the liquid fuels, during the reaction Ca(OH) 2 was used. Then, H 2 SO ... -
Analysis of ethanol RCCI application with safflower biodiesel blends in a high load diesel power generator
(Elsevier, 2016-11-15)The effects of RCCI in a diesel power generator by using safflower oil biodiesel-diesel blends were experimentally investigated. Ethanol was premixed as PFI by rates of 30% and 50% of total mass fuel consumption of the ... -
An artificial neural network model to predict the thermal properties of concrete using different neurons and activation functions
(Hindawi, 2019-04-01)Growing concerns on energy consumption of buildings by heating and cooling applications have led to a demand for improved insulating performances of building materials. The establishment of thermal property for a building ... -
Behaviour of bi adhesive in double strap joint with embedded to bending
(Journal of Theoretical and Applied Mechanics, 2015-06-15)In this study, behaviour of bi-adhesive used in the repair of damaged parts was analyzed, using the finite element method. In a double-strap joint with an embedded patch, patch is embedded into the adherents for structural ... -
Beş eksenli bilyalı vidalı mil tahrikli robot kolun tasarımı ve mach3 kartıyla kontrolü
(Batman Üniversitesi, 2017-02-01)Ġmalatta robot kullanımı, iĢçilik ve malzeme giderlerini azaltır, üretimde standardı sağlar ve kaliteyi artırır. Ürün artıĢı otomasyon ve esnek üretimle gerçekleĢebilmektedir. Günümüzde mevcut olan robot uygulamalarında ... -
Biodiesel from safflower oil and its application in a diesel engine
(Journals & Books, 2011-03)Safflower seed oil was chemically treated by the transesterification reaction in methyl alcohol environment with sodium hydroxide (NaOH) to produce biodiesel. The produced biodiesel was blended with diesel fuel by 5% (B5), ... -
Biodiesel production from inedible animal tallow and an experimental investigation of its use as alternative fuel in a direct injection diesel engine
(Elsevier, 2009-02-15)In this study, a substitute fuel for diesel engines was produced from inedible animal tallow and its usability was investigated as pure biodiesel and its blends with petroleum diesel fuel in a diesel engine. Tallow methyl ... -
Biodiesel production from leather industry wastes as an alternative feedstock and its use in diesel engines
(SAGE, 2013-11-01)Waste leather fat is produced by the leather industry in fleshing processing and discarded as waste. These wastes can be used as a potential feedstock for biodiesel production due to their considerable fat content. In this ... -
Biodiesel production from raw cottonseed oil and its characterization
(Energy Education Science and Technolgy Part A, 2011-07)In this study, raw cottonseed oil of Turkish origin was transesterified using methyl alcohol and an alkali catalyst to obtain the cottonseed oil methyl ester. The obtained cottonseed oil methyl ester was analyzed by gas ... -
Biodiesel properties of microalgae (Chlorella protothecoides) oil for use in diesel engines
(Taylor & Francis, 2018-09-08)In this study, biodiesel was produced from a microalgae oil, chlorella protothecoides, by typical alkali-catalyzed transesterification in conditions such as a 0.75 wt.% KOH of the oil as catalyst, 68°C and 80 min which was ... -
Biofuels derived from Turkish industry wastes - A study of performance and emissions in a diesel engine
(Wiley-Blackwell, 2015-08-13)Recently, research has focused on the biofuel production from local industrial wastes due to the risk of greenhouse emissions derived from land-use change (both directly and indirectly) of conventional feedstock and the ... -
Bir dizel motorunda kanola yağı kullanımında ön-ısıtma işleminin egzoz emisyonlarına etkilerinin deneysel araştırılması
(e-Journal of New World Sciences Academy, 2009-03-01)Bu çalışmanın amacı; bitkisel yağlardan olan kanola yağının önceden ısıtılarak bir dizel motorunda kullanımından kaynaklanan egzoz emisyonlarının nasıl değiştiğini incelemektir. Bu amaçla saf kanola yağı %20 ve %50 ... -
Bir yüzeyi açık kübik boşlukta engellerin doğal taşınımın üzerindeki etkisi
(e-Journal of New World Sciences Academy, 2010-01)Bu çalışmada başlangıçta kapalı kübik hacim olan ön yüzeyinin ortama açılmasıyla kübik boşluk haline gelen hacimde, arka yüzeyinden soğutma sınır şartında giriş yüzeyine engellerin konulması ve giriş yüzeyinin tamamen ... -
Bir yüzeyinden soğutulan kübik boşlukta doğal taşınım
(e-Journal of New World Sciences Academy, 2010-01)Bu çalışmada başlangıçta kapalı kübik hacim olan ön yüzeyinin ortama açılmasıyla kübik boşluk haline gelen hacimde, arka yüzeyinden soğutma sınır şartında, laminer durumda doğal taşınım deneysel ve teorik olarak ... -
Bir yüzeyinden ısıtılan kübik boşlukta doğal taşınımın incelenmesi
(e-Journal of New World Sciences Academy, 2010-01)Bu çalışmada başlangıçta kapalı kübik hacim olan ön yüzeyinin ortama açılmasıyla kübik boşluk haline gelen hacimde, arka yüzeyinden ısıtma sınır şartında doğal taşınım laminer durumda deneysel ve teorik olarak incelenmiştir. ... -
Calculating energy-induced carbon footprint: Batman University case
(European Journal of Technique (EJT), 2019-06-30)This study determined the energy-induced carbon footprint arising from energy consumption in Batman University. It is important for universities to do acts toward control the greenhouse gas emission based on energy consumption ... -
Calculating molding parameters in plastic injection molds with ANN and developing software
(Taylor & Francis, 2012-02)In recent years, plastic injection molds are widely used for producing products in various areas, such as aerospace, automotive, medical, electronics, and toys. The quality of these products depends on correctly chosen ... -
Characterization of hazelnut, pistachio, and apricot Kernel Shell particles and analysis of their composite properties
(Taylor & Francis, 2021-05)In this study, hazelnut, pistachio, and apricot kernel shells were ground size of 0–300 µm, 300–600 µm, and 600–850 µm. The cellulose, ash, humidity, and metal contents of these powder particles were chemically analyzed ...
