A fuzzy logic model to determine the effects of die/blank holder angle and punch radius on drawing ratio in angular deep drawing dies

Basit Öğe Kaydı
dc.authorid0000-0003-1753-7712en_US
dc.contributor.authorÇelik, Yahya Hışman
dc.contributor.authorÖzek, Cebeli
dc.contributor.authorBulut Özek, Müzeyyen
dc.date.accessioned2021-11-08T10:50:50Z
dc.date.available2021-11-08T10:50:50Z
dc.date.issued2013-05en_US
dc.departmentBatman Üniversitesi Mühendislik - Mimarlık Fakültesi Makine Mühendisliği Bölümüen_US
dc.description.abstractDeep drawing process is one of the widely used methods in sheet-metal forming. With the deep drawing method, products of various geometrical shapes such as saucepans, tubes, perfume and soft drink cans can be obtained easily. Therefore, the optimization of the deep drawing process is very important for the industry. In conventional deep drawing method, no angle is given to the surfaces of die and pressure plate. Both die and pressure plate and the geometrical shape of die and punch have a significant effect on drawing ratio. In this study, the effect of angles and radii on the drawing ratio of blank holder and punch forces were theoretically calculated and experimentally investigated in order to deep drawing the DIN EN 10130-91 sheet by giving angles on the die/blank holder surfaces and radii on the punch edge surfaces. In addition, the data obtained from the experimental study were calculated with the Fuzzy Logic Model and the optimum and the lowest drawing ratios for the die and punch radius as well as the die/blank holder were determined. The optimum drawing ratio in the experimental study was obtained as β = 2.3, when the die and punch radius was R = 10 mm and the die/blank holder angle was θ = 12.5°, and as β = 2.2 in the Fuzzy Logic model. The lowest drawing ratio was obtained as β = 1.8 when the blank holder angle was θ = 0° in the experimental study and as β = 1.82 in the Fuzzy Logic model.en_US
dc.identifier.citationÇelik, Y.H., Özek, C., Bulut Özek, M. (2013). A fuzzy logic model to determine the effects of die/blank holder angle and punch radius on drawing ratio in angular deep drawing dies. Journal of Intelligent & Fuzzy Systems, 25 (2), pp.379-388. DOI:https://dx.doi.org/10.3233/IFS-2012-0644en_US
dc.identifier.endpage388en_US
dc.identifier.issn1064-1246
dc.identifier.issue2en_US
dc.identifier.scopusqualityQ2en_US
dc.identifier.startpage379en_US
dc.identifier.urihttps://dx.doi.org/10.3233/IFS-2012-0644
dc.identifier.urihttps://hdl.handle.net/20.500.12402/3888
dc.identifier.volume25en_US
dc.identifier.wosqualityQ3en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherJournal of Intelligent & Fuzzy Systemsen_US
dc.relation.isversionof10.3233/IFS-2012-0644en_US
dc.relation.journalJournal of Intelligent & Fuzzy Systemsen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.rightsAttribution-NonCommercial-ShareAlike 3.0 United States*
dc.rights.urihttp://creativecommons.org/licenses/by-nc-sa/3.0/us/*
dc.subjectDeep Drawing Diesen_US
dc.subjectThe Fuzzy Logicen_US
dc.subjectDrawing Ratioen_US
dc.titleA fuzzy logic model to determine the effects of die/blank holder angle and punch radius on drawing ratio in angular deep drawing diesen_US
dc.title.alternativeAçısal derin çekme kalıplarında kalıp/boş tutucu açısı ve zımba yarıçapının çekme oranı üzerindeki etkilerini belirlemek için bir bulanık mantık modelien_US
dc.typeArticleen_US

Dosyalar

Lisans paketi
Listeleniyor 1 - 1 / 1
Küçük Resim Yok
İsim:
license.txt
Boyut:
1.44 KB
Biçim:
Item-specific license agreed upon to submission
Açıklama:
İndir

Koleksiyon

Mühendislik-Mimarlık Fakültesi Makine Mühendisliği Bölümü Makale Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu
WoS İndeksli Yayınlar Koleksiyonu