Effects of cutting parameters and point angle on thrust force and delamination in drilling of CFRP

Basit Öğe Kaydı
dc.authorid0000-0003-1753-7712en_US
dc.contributor.authorÇelik, Yahya Hışman
dc.contributor.authorKılıçkap, Erol
dc.contributor.authorYardımeden, Ahmet
dc.date.accessioned2021-11-08T10:29:14Z
dc.date.available2021-11-08T10:29:14Z
dc.date.issued2014-11-14en_US
dc.departmentBatman Üniversitesi Mühendislik - Mimarlık Fakültesi Makine Mühendisliği Bölümüen_US
dc.description.abstractParts made of composite materials are generally produced by near-net-shape technology. However, additional machining operations such as drilling are often required to facilitate components assembling. Drilling of composite materials is also a common process in the assembly of aerospace and automotive composite structures. During drilling, unlike the conventional materials, a few damage forms may take place. Among these damage forms, the delamination is the most important one. Therefore, the experimental studies carried out on drilling of CFRP composite materials for determining optimum processing parameters are of great importance. In this particular study, delamination in CFRP composites caused by drilling was investigated. The composite material was drilled under various spindle speeds, feed rates and drill point angles. The results showed that delamination and thrust forces were affected by cutting parameters. It was demonstrated that feed rate and drill point angle make the largest contribution to the overall performance.en_US
dc.identifier.citationÇelik, Y.H., Kılıçkap, E., Yardımeden, A. (2014). Effects of cutting parameters and point angle on thrust force and delamination in drilling of CFRP. Materials Testing, 56 (11-12), pp.1042-1048. DOI:https://dx.doi.org/10.3139/120.110666en_US
dc.identifier.endpage1048en_US
dc.identifier.issn0025-5300
dc.identifier.issue11-12en_US
dc.identifier.scopusqualityQ4en_US
dc.identifier.startpage1042en_US
dc.identifier.urihttps://dx.doi.org/10.3139/120.110666
dc.identifier.urihttps://hdl.handle.net/20.500.12402/3886
dc.identifier.volume56en_US
dc.identifier.wosqualityQ2en_US
dc.language.isoenen_US
dc.publisherDe Gruyteren_US
dc.relation.isversionof10.3139/120.110666en_US
dc.relation.journalMaterials Testingen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/restrictedAccessen_US
dc.rightsAttribution-NonCommercial-ShareAlike 3.0 United States*
dc.rights.urihttp://creativecommons.org/licenses/by-nc-sa/3.0/us/*
dc.subjectMaterials Testingen_US
dc.subjectDrillingen_US
dc.subjectDelaminationen_US
dc.subjectCFRPen_US
dc.subjectThrust Forceen_US
dc.titleEffects of cutting parameters and point angle on thrust force and delamination in drilling of CFRPen_US
dc.title.alternativeCFRP delme işleminde kesme parametrelerinin ve nokta açısının itme kuvveti ve delaminasyona etkisien_US
dc.typeArticleen_US

Dosyalar

Lisans paketi
Listeleniyor 1 - 1 / 1
Küçük Resim Yok
İsim:
license.txt
Boyut:
1.44 KB
Biçim:
Item-specific license agreed upon to submission
Açıklama:
İndir

Koleksiyon

Mühendislik-Mimarlık Fakültesi Makine Mühendisliği Bölümü Makale Koleksiyonu