Effect of temperature, force, and vibration on fatigue strength of friction stir-welded AA7075 aluminum alloy joints
Yükleniyor...
Tarih
2021-01-04
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
SpringerLink
Erişim Hakkı
info:eu-repo/semantics/restrictedAccess
Attribution-NonCommercial-ShareAlike 3.0 United States
Attribution-NonCommercial-ShareAlike 3.0 United States
Özet
In this study, the AA7075 alloy pairs were welded by friction stir welding method by using conical- and
triangular-type stirrer pins. Welding forces and moments, vibration, and temperature values have been
measured during the jointing depending on the welding parameters. Finally, microstructures were examined and mechanical tests were carried out. Results obtained from the experiments revealed that at low
spindle speed and welding feed rates, the temperatures formed on the surface of the alloy pair were high,
the vibrations were low, and the welding force and moments were partially high. When the microstructures
of the welded areas are examined, it was determined that the conical mixing pin has a better microstructure
than the triangular mixing pin. In addition, it was determined that the mechanical properties of welded
joints having a good microstructure were quite good. As a result, it was observed that forces during
welding, temperature of welding, and vibration values have an effect on microstructure and mechanical
properties.
Açıklama
Anahtar Kelimeler
Fatigue, Force, FSW, Temperature, Vibration
Kaynak
WoS Q Değeri
N/A
Scopus Q Değeri
N/A
Cilt
30
Sayı
Künye
Çelik, Y.H., Kılıçkap, E., Çetkin, E. (2021). Effect of temperature, force, and vibration on fatigue strength of friction stir-welded AA7075 aluminum alloy joints. Journal of Materials Engineering and Performance, 30, pp.202-211. DOI:https://dx.doi.org/10.1007/s11665-020-05436-y
