Effect of MQL flow rate on machinability of AISI 4140 steel

Basit Öğe Kaydı
dc.authorid0000-0003-1391-172Xen_US
dc.contributor.authorGürbüz, Hüseyin
dc.contributor.authorGönülaçar, Yunus Emre
dc.contributor.authorBaday, Şehmus
dc.date.accessioned2021-11-17T10:25:56Z
dc.date.available2021-11-17T10:25:56Z
dc.date.issued2020-06-27en_US
dc.departmentBatman Üniversitesi Mühendislik - Mimarlık Fakültesi Makine Mühendisliği Bölümüen_US
dc.description.abstractMany studies were performed about the influence of minimum quantity lubrication (MQL) technique on cutting performance in the literature, but there is no paper examining the effect of different MQL flow rates and cutting parameters on machinability of AISI 4140 material as a whole. In this study, the effects of different MQL flow rates and cutting parameters on surface roughness, main cutting force and cutting tool flank wear (VB), with great importance among the machinability criteria, and forming as a result of the machining of AISI 4140, were revealed. At the end of the experiments, it was determined that rise of flow rate affected main cutting forces positively to a certain extent; yet, it exhibited no significant effect on surface roughness, but reduced VB. Also, it was observed that both main cutting force and surface roughness increased with the increase of feed, while generally decreased with the increase of cutting speed. It was seen that flank wear was positively affected by the increase in flow rate; and this decreased with the increase in flow rate. R2 values obtained as 99.8% and 99.9% for main cutting forces and surface roughness values modeled statistically with the help of quadratic equations, respectively.en_US
dc.identifier.citationGürbüz, H., Gönülaçar, Y.E., Baday, Ş. (2020). Effect of MQL flow rate on machinability of AISI 4140 steel. Machining Science and Technology, 24 (5), pp. 663-687. DOI:https://doi.org/10.1080/10910344.2020.1752234en_US
dc.identifier.endpage687en_US
dc.identifier.issn1091-0344
dc.identifier.issue5en_US
dc.identifier.scopusqualityQ2en_US
dc.identifier.startpage663en_US
dc.identifier.urihttps://doi.org/10.1080/10910344.2020.1752234
dc.identifier.urihttps://hdl.handle.net/20.500.12402/4008
dc.identifier.volume24en_US
dc.identifier.wosqualityQ2en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherTaylor & Francisen_US
dc.relation.isversionof10.1080/10910344.2020.1752234en_US
dc.relation.journalMachining Science and Technologyen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/restrictedAccessen_US
dc.rightsAttribution-NonCommercial-ShareAlike 3.0 United States*
dc.rights.urihttp://creativecommons.org/licenses/by-nc-sa/3.0/us/*
dc.subjectCutting Tool Wearen_US
dc.subjectMain Cutting Forceen_US
dc.subjectMinimum Quantity Lubrication (MQL)en_US
dc.subjectSurface Roughnessen_US
dc.subjectTurningen_US
dc.titleEffect of MQL flow rate on machinability of AISI 4140 steelen_US
dc.title.alternativeMQL akış hızının AISI 4140 çeliğinin işlenebilirliği üzerindeki etkisien_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim Yok
İsim:
Effect of MQL flow rate on machinability of AISI.pdf
Boyut:
3.8 MB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin / Full Text
İndir
Lisans paketi
Listeleniyor 1 - 1 / 1
Küçük Resim Yok
İsim:
license.txt
Boyut:
1.44 KB
Biçim:
Item-specific license agreed upon to submission
Açıklama:
İndir

Koleksiyon

Mühendislik-Mimarlık Fakültesi Makine Mühendisliği Bölümü Makale Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu
WoS İndeksli Yayınlar Koleksiyonu