Investigation of turning in different cutting parameters of Al 6061 with finite elements method
| dc.authorid | 0000-0003-1753-7712 | en_US |
| dc.contributor.author | Çelik, Yahya Hışman | |
| dc.contributor.author | Özek, Cebeli | |
| dc.contributor.author | Türkan, Cihat | |
| dc.date.accessioned | 2021-11-09T08:05:58Z | |
| dc.date.available | 2021-11-09T08:05:58Z | |
| dc.date.issued | 2017-10 | en_US |
| dc.department | Batman Üniversitesi Mühendislik - Mimarlık Fakültesi Makine Mühendisliği Bölümü | en_US |
| dc.description.abstract | In this study, the effects of cutting parameters on cutting force, temperature and stress were investigated in the turning of 6061 aluminum alloy by using DEFORM-3D package program based on finite element method. Constant depth of cut (1 mm), three different cutting speeds (40, 60 and 80 m/min), and three different feed rates (0.05, 0.1 and 0.15 mm/rev) were used in research simulations. From the made analyses, the lowest cutting force was obtained as 150 N at 80 m/min cutting speed and 0.05 mm/rev feed rate, the highest cutting force was obtained as 368 N at 40 m/min cutting speed and 0.15 mm/rev feed rate. While the lowest temperature was obtained as 230 °C at 40 m/min cutting speed and 0.05 mm/rev feed rate, the highest temperature was obtained as 354 °C at 80 m/min cutting speed and 0.05 mm/rev feed rate. In addition, the lowest stress was 997 MPa at 80 m/min cutting speed and 0.05 mm/rev feed rate, the maximum stress was 1090 MPa at 40 m/min cutting speed and 0.15 mm/rev feed rate. It has been observed that the cutting force and the stress value show a similar tendency depending on the cutting parameters | en_US |
| dc.identifier.citation | Çelik, Y.H., Özek, C., Türkan, C. (2017). Investigation of turning in different cutting parameters of Al 6061 with finite elements method. 8th International Advanced Technologies Symposium, 19-22 October 2017, Elazığ, Turkey | en_US |
| dc.identifier.uri | http://iats17.firat.edu.tr/ | |
| dc.identifier.uri | https://hdl.handle.net/20.500.12402/3903 | |
| dc.language.iso | tr | en_US |
| dc.publisher | Fırat Üniversitesi | en_US |
| dc.relation.journal | 8th International Advanced Technologies Symposium, 19-22 October 2017 | en_US |
| dc.relation.publicationcategory | Konferans Öğesi - Uluslararası - Kurum Öğretim Elemanı | en_US |
| dc.rights | info:eu-repo/semantics/openAccess | en_US |
| dc.rights | Attribution-NonCommercial-ShareAlike 3.0 United States | * |
| dc.rights.uri | http://creativecommons.org/licenses/by-nc-sa/3.0/us/ | * |
| dc.subject | Al 6061 | en_US |
| dc.subject | Cutting Force | en_US |
| dc.subject | Finite Elements | en_US |
| dc.subject | Stress | en_US |
| dc.subject | Turning | en_US |
| dc.title | Investigation of turning in different cutting parameters of Al 6061 with finite elements method | en_US |
| dc.type | Conference Object | en_US |
