CNC tel elektro deşarj işlemede tel elektrot çapı, kaplamalı ve kaplamasız tel elektrotların kesme hızına etkileri
Yükleniyor...
Dosyalar
Tarih
2017-10
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Fırat Üniversitesi
Erişim Hakkı
info:eu-repo/semantics/openAccess
Attribution-NonCommercial-ShareAlike 3.0 United States
Attribution-NonCommercial-ShareAlike 3.0 United States
Özet
In this experimental study, the influence of the wire electrode diameter, coated and uncoated wire
electrodes on the cutting speed, which is an important parameter in evaluating the machine performance
in CNC wire electrode discharge technology, was investigated. Coated and uncoated wire electrodes of
0,25 and 0,30 mm in diameter were used for the cutting speed tests, on the other hand, AISI D2 and AISI
304 stainless steels as workpiece materials and two different types of cooling methods were utilized.
Cutting speed values obtained with 0,30 mm diameter wire electrodes were found to be higher than those
obtained with 0.25 mm diameter wire electrodes. Depending on the type of coated and uncoated wire
electrode type, the lowest cutting speeds were achieved with uncoated wire electrodes, while the highest
cutting speeds were obtained with coated wire electrodes. The cutting speeds obtained by the submerged
cooling method were found to be higher than those obtained by the flushing cooling method
Açıklama
Anahtar Kelimeler
CNC WEDM, Wire Electrode Diameter, Coated and Uncoated Wire Electrodes, Cooling Types, Tel Elektrot Çapı, Kaplamalı ve Kaplamasız Tel Elektrotlar, Soğutma Çeşitleri
Kaynak
WoS Q Değeri
Scopus Q Değeri
Cilt
Sayı
Künye
Gürbüz, H., Baday, Ş. (2017). CNC tel elektro deşarj işlemede tel elektrot çapı, kaplamalı ve kaplamasız tel elektrotların kesme hızına etkileri. 8th International Advanced Technologies Symposium, 19-22 October 2017, Elazığ, Turkey
