Milling Inconel 718 workpiece with cryogenically treated and untreated cutting tools

Basit Öğe Kaydı
dc.authorid0000-0003-1391-172Xen_US
dc.contributor.authorGürbüz, Hüseyin
dc.contributor.authorBaday, Şehmus
dc.date.accessioned2021-11-17T08:26:19Z
dc.date.available2021-11-17T08:26:19Z
dc.date.issued2021-07-17en_US
dc.departmentBatman Üniversitesi Mühendislik - Mimarlık Fakültesi Makine Mühendisliği Bölümüen_US
dc.description.abstractAlthough Inconel 718 is an important material for modern aircraft and aerospace, it is a kind material, which is known to have low machinability. Especially, while these types of materials are machined, high cutting temperatures, BUE on cutting tool, high cutting forces, and work hardening occur. Therefore, in recent years, instead of producing new cutting tools that can withstand these difficult conditions, cryogenic process, which is a heat treatment method to increase the wear resistance and hardness of the cutting tool, has been applied. In this experimental study, feed force, surface roughness, vibration, cutting tool wear, hardness, and abrasive wear values that occurred as a result of milling of Inconel 718 material by means of cryogenically treated and untreated cutting tools were investigated. Three different cutting speeds (35-45-55 m/min) and three different feed rates (0.02- 0.03-0.04 mm/tooth) at constant depth of cut (0.2 mm) were used as cutting parameters in the experiments. As a result of the experiments, lower feed forces, surface roughness, vibration, and cutting tool wear were obtained with cryogenically treated cutting tools. As the feed rate and cutting speed were increased, it was seen that surface roughness, vibration, and feed force values increased. At the end of the experiments, it was established that there was a significant relation between vibration and surface roughness. However, there appeared an inverse proportion between abrasive wear and hardness values. While BUE did not occur during cryogenically treated cutting tools, it was observed that BUE occurred in cutting tools which were not cryogenically treated. Also, in this study, the statistical validity of the experimental values was tested with the help of secondorder equations and analyses of variance (ANOVA). R2 values obtained as 99.14%, 99.76%, and 97.98% for vibration, surface roughness, and feed force values were modeled statistically with the help of second-order equations, respectively.en_US
dc.identifier.citationGürbüz, H., Baday, Ş. (2021). Milling Inconel 718 workpiece with cryogenically treated and untreated cutting tools. The International Journal of Advanced Manufacturing Technology, 116 (9-10), pp.3135-3148. DOI:https://dx.doi.org/10.1007/s00170-021-07688-xen_US
dc.identifier.endpage3148en_US
dc.identifier.issue9-10en_US
dc.identifier.scopusqualityN/Aen_US
dc.identifier.startpage3135en_US
dc.identifier.urihttps://dx.doi.org/10.1007/s00170-021-07688-x
dc.identifier.urihttps://hdl.handle.net/20.500.12402/4004
dc.identifier.volume116en_US
dc.identifier.wosqualityN/Aen_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherSpringerLinken_US
dc.relation.isversionof10.1007/s00170-021-07688-xen_US
dc.relation.journalThe International Journal of Advanced Manufacturing Technologyen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/restrictedAccessen_US
dc.rightsAttribution-NonCommercial-ShareAlike 3.0 United States*
dc.rights.urihttp://creativecommons.org/licenses/by-nc-sa/3.0/us/*
dc.subjectInconel 718en_US
dc.subjectCryogenic Treatmenten_US
dc.subjectEnd Millingen_US
dc.subjectFeed Forcesen_US
dc.subjectSurface Roughnessen_US
dc.subjectTool Wearen_US
dc.titleMilling Inconel 718 workpiece with cryogenically treated and untreated cutting toolsen_US
dc.title.alternativeInconel 718 iş parçasının kriyojenik işlem görmüş ve işlem görmemiş kesici takımlarla frezelenmesien_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim Yok
İsim:
Milling Inconel 718 workpiece with cryogenically treated.pdf
Boyut:
5.2 MB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin / Full Text
İndir
Lisans paketi
Listeleniyor 1 - 1 / 1
Küçük Resim Yok
İsim:
license.txt
Boyut:
1.44 KB
Biçim:
Item-specific license agreed upon to submission
Açıklama:
İndir

Koleksiyon

Mühendislik-Mimarlık Fakültesi Makine Mühendisliği Bölümü Makale Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu
WoS İndeksli Yayınlar Koleksiyonu