Effect of matrix material and orientation angle on tensile and tribological behavior of jute reinforced composites

Basit Öğe Kaydı
dc.authorid0000-0003-1753-7712en_US
dc.contributor.authorÇelik, Yahya Hışman
dc.contributor.authorDemir, Mehmet Emin
dc.contributor.authorKılıçkap, Erol
dc.date.accessioned2021-11-02T11:47:43Z
dc.date.available2021-11-02T11:47:43Z
dc.date.issued2019-07-27en_US
dc.departmentBatman Üniversitesi Mühendislik - Mimarlık Fakültesi Makine Mühendisliği Bölümüen_US
dc.description.abstractEnvironmental friendly natural fibers have been used instead of petroleum-based synthetic fibers as reinforcements because of the depletion of oil resources, plastic waste disposal problems and the emissions generated during combustion. In these natural fibers, thermoplastic or thermoset materials are used as matrix material because of their low cost, light weight and durability. In this study, the effects of ply number (2 and 3 layer) and orientation angle of reinforcement (0/90° and ± 45°) and matrix type (thermoset and thermoplastic) on the tensile strength of jute reinforced composites were investigated. Also, the effect of the reinforcement orientation angle, sliding time (600, 1200 and 1800 s) and applied load (5, 10 and 15 N) on tribological characteristics were determined. Adhesive and abrasion wear tests were carried out at 0.15 m × s−1 sliding speed. It was observed that the matrix material and the reinforcement are very important in tensile and wear tests, while the ply number and the orientation angle only exert an influence in the tensile strength of composites. It was determined that an increase in load and sliding time is the most effective parameter on wear experiments.en_US
dc.identifier.citationÇelik, Y.H., Demir, M.E., Kılıçkap, E. (2019). Effect of matrix material and orientation angle on tensile and tribological behavior of jute reinforced composites. Materials Testing, 61 (8), pp.806-812. DOI:https://doi.org/10.3139/120.111388en_US
dc.identifier.endpage812en_US
dc.identifier.issn0025-5300
dc.identifier.issue8en_US
dc.identifier.scopusqualityQ2en_US
dc.identifier.startpage806en_US
dc.identifier.urihttps://doi.org/10.3139/120.111388
dc.identifier.urihttps://hdl.handle.net/20.500.12402/3876
dc.identifier.volume61en_US
dc.identifier.wosqualityQ2en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherDe Gruyteren_US
dc.relation.isversionof10.3139/120.111388en_US
dc.relation.journalMaterials Testingen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/restrictedAccessen_US
dc.rightsAttribution-NonCommercial-ShareAlike 3.0 United States*
dc.rights.urihttp://creativecommons.org/licenses/by-nc-sa/3.0/us/*
dc.titleEffect of matrix material and orientation angle on tensile and tribological behavior of jute reinforced compositesen_US
dc.title.alternativeJüt takviyeli kompozitlerin çekme ve tribolojik davranışlarına matris malzemesi ve oryantasyon açısının etkisien_US
dc.typeArticleen_US

Dosyalar

Lisans paketi
Listeleniyor 1 - 1 / 1
Küçük Resim Yok
İsim:
license.txt
Boyut:
1.44 KB
Biçim:
Item-specific license agreed upon to submission
Açıklama:
İndir

Koleksiyon

Mühendislik-Mimarlık Fakültesi Makine Mühendisliği Bölümü Makale Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu
WoS İndeksli Yayınlar Koleksiyonu