Investigation of the most suitable drilling parameters and power consumption for energy saving

Basit Öğe Kaydı
dc.authorid0000-0002-2307-9669en_US
dc.contributor.authorAdin, Mehmet Şükrü
dc.date.accessioned2023-03-08T06:12:09Z
dc.date.available2023-03-08T06:12:09Z
dc.date.issued2022-07-02en_US
dc.departmentBatman Üniversitesi Beşiri Organize Sanayi Bölgesi Meslek Yüksekokulu Tekstil, Giyim, Ayakkabı ve Deri Bölümüen_US
dc.description.abstractDue to the continuous increase in the cost of energy used in the manufacturing industry, the cost of the product is also increasing. Therefore, studies that do not affect product quality and save energy gain importance. For this purpose, in this study, the minimum amount of energy required to obtain the best hole surface quality was investigated by blind drilling of the AISI 4140 workpiece with a 5.2 mm diameter AISI M2 HSS drill at different spindle speeds (1000, 2000, 3000 rev/min) and different feed rates (150, 200, 250 mm/min). When the effects of drilling parameters on the surface roughness were examined, it was understood that it tended to decrease depending on the increase in the number of revolutions, and increased depending on the increase in the feed rate. It has been understood that the power required (consumed) of the CNC vertical machining center to open blind holes on the workpiece increases in direct proportion to the increase in cutting and feed rate. It was found that 3000 rpm and 150 mm/min feed rate were the most suitable machining parameters for the lowest surface roughness and the required optimum power value was 3.14 watts. As a result of the study, it has been understood that at least 11% energy saving can be achieved thanks to the determined parameters and optimum power value.en_US
dc.identifier.citationAdin, M. Ş. (2022). Investigation of the most suitable drilling parameters and power consumption for energy saving. Batman Energy Summit, 30 June-02 July 2022, Batman, Turkey.en_US
dc.identifier.urihttps://hdl.handle.net/20.500.12402/4412
dc.language.isoenen_US
dc.publisherBatman Üniversitesien_US
dc.relation.journalBatman Energy Summit, 30 June-02 July 2022en_US
dc.relation.publicationcategoryKonferans Öğesi - Ulusal - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectDrillingen_US
dc.subjectEnergy Savingen_US
dc.subjectPower Consumptionen_US
dc.subjectAISI 4140en_US
dc.subjectAISI M2en_US
dc.titleInvestigation of the most suitable drilling parameters and power consumption for energy savingen_US
dc.typeConference Objecten_US

Dosyalar

Lisans paketi
Listeleniyor 1 - 1 / 1
Küçük Resim Yok
İsim:
license.txt
Boyut:
1.44 KB
Biçim:
Item-specific license agreed upon to submission
Açıklama:
İndir

Koleksiyon

Batman Üniversitesi, Beşiri Organize Sanayi Bölgesi Meslek Yüksekokulu, Tekstil, Giyim, Ayakkabı ve Deri Bölümü, Bildiri Metinleri Koleksiyonu