The effect of angle on the strain of scarf lap joints subjected to tensile loads
Yükleniyor...
Tarih
2011-09-02
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Elsevier
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Attribution-NonCommercial-NoDerivs 3.0 United States
Attribution-NonCommercial-NoDerivs 3.0 United States
Özet
In this paper, the mechanical behavior of the scarf lap joints (SLJs) bonded with adhesive (Vinylester Atlac 580) under a tensile load was analyzed. The effects of scarf angle at the interface strain distributions of SLJs were examined. The stress analyses were performed via three dimensional Finite Element Method (3D-FEM). The 3D-FEM code employed was Ansys (12.0). Experimental results were compared with the 3D-FEM results and were found quite reasonable. The results indicated that the maximum values of the normalized epsilon(x) strain values were determined at 0 = 60 degrees in all joints.
Açıklama
Anahtar Kelimeler
Adhesives, Composite Material, Scarf Lap Joints (SLJs), Strain, Finite Element Method (FEM)
Kaynak
WoS Q Değeri
Q1
Scopus Q Değeri
Q1
Cilt
36
Sayı
7
Künye
Adin, H. (2011). The effect of angle on the strain of scarf lap joints subjected to tensile loads. Applied Mathematical Modelling, 36 (7), pp. 2858-2867. https://doi.org/10.1016/j.apm.2011.09.079
