Microstructure and mechanical properties of AA7075/AA5182 jointed byFSW

Basit Öğe Kaydı
dc.authorid0000-0002-0217-5897en_US
dc.authorid0000-0003-1753-7712en_US
dc.authorid0000-0002-6737-3720en_US
dc.contributor.authorÇetkin, Edip
dc.contributor.authorÇelik, Yahya Hışman
dc.contributor.authorTemiz, Şemsettin
dc.date.accessioned2019-04-03T07:40:01Z
dc.date.available2019-04-03T07:40:01Z
dc.date.issued2019-06
dc.departmentBatman Üniversitesi Mühendislik - Mimarlık Fakültesi Makine Mühendisliği Bölümüen_US
dc.description.abstractIn this study, AA7075 and AA5182 aluminium alloys were joined using different rotation speeds (980, 1325 and 1800 rpm), feed rates (108 and 233 mm/min) and stirred pins having two different geometries (conical helical and triangular). Microstructures of welding joints were examined by an optical microscope and a scanning electron microscope (SEM). Vickers hardness measurements were performed in the welding zone of samples removed from each welded plate. Tensile and fatigue tests were also applied to the test specimens taken from the welded plates. After the tensile tests, the surface fractures and possible welding defects were scanned via SEM. The best mechanical properties were obtained when conical helical shape stirrer pins were used. The values were 265 MPa for tensile test and 159 MPa for fatigue test. The hardness value was very close to each other and varied depending on the rotation speed. The highest hardness value was determined as 87 HV in the weld center at 1325-rpm rotation speed.en_US
dc.identifier.citationÇetkin, E., Çelik, Y. H., Temiz, S. (2019). Microstructure and mechanical properties of AA7075/AA5182 jointed by FSW. Journal of Materials Processing Technology, 268, pp. 107-116. DOI: https://doi.org/10.1016/j.jmatprotec.2019.01.005en_US
dc.identifier.endpage116en_US
dc.identifier.issn0924-0136
dc.identifier.scopusqualityQ1en_US
dc.identifier.startpage107en_US
dc.identifier.urihttps://doi.org/10.1016/j.jmatprotec.2019.01.005
dc.identifier.urihttps://hdl.handle.net/20.500.12402/1920
dc.identifier.volume268en_US
dc.identifier.wosqualityQ1en_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherElsevieren_US
dc.relation.isversionof10.1016/j.jmatprotec.2019.01.005en_US
dc.relation.journalJournal of Materials Processing Tech.en_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.rightsAttribution-NonCommercial-NoDerivs 3.0 United States*
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/3.0/us/*
dc.subjectFSWen_US
dc.subjectFatigue strengthen_US
dc.subjectMicrostructureen_US
dc.subjectTensile strengthen_US
dc.titleMicrostructure and mechanical properties of AA7075/AA5182 jointed byFSWen_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim Yok
İsim:
1.pdf
Boyut:
14.95 MB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin / Full Text
İndir
Lisans paketi
Listeleniyor 1 - 1 / 1
Küçük Resim Yok
İsim:
license.txt
Boyut:
1.44 KB
Biçim:
Item-specific license agreed upon to submission
Açıklama:
İndir

Koleksiyon

Mühendislik-Mimarlık Fakültesi Makine Mühendisliği Bölümü Makale Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu