The investigation of the effect of angle on the failure load and strength of scarf lap joints

Yükleniyor...
Küçük Resim

Tarih

2012-05-22

Dergi Başlığı

Dergi ISSN

Cilt Başlığı

Yayıncı

Elsevier

Erişim Hakkı

info:eu-repo/semantics/closedAccess
Attribution-NonCommercial-ShareAlike 3.0 United States

Özet

In this study, the effect of scarf angle on tensile strength of an epoxy adhesive was investigated bothexperimentally and numerically. Tensile tests were carried out using Scarf Lap Joints (SLJs). Commer-cially available epoxy (Atlac 580) was used as adhesive and fiber reinforced epoxy/glass (Hgw 2372Grade G10 EP GC 203) was used as adherends. The stress analyses were performed using a three-dimensional Finite Element Method (FEM). The FEM analyses were executed with Ansys (V.14.0.1).Experimental results were compared with the FEM results and found quite reasonable. The results haveindicated that when overlap angle increases, the failure load values also decrease in all joints.

Açıklama

Anahtar Kelimeler

Adhesives, Composite Material, Scarf Lap Joints, Stress Analysis, Finite Element Method (FEM)

Kaynak

WoS Q Değeri

Q1

Scopus Q Değeri

Q1

Cilt

61

Sayı

1

Künye

Adin, H. (2012). The effect of angle on the strain of scarf lap joints subjected to tensile loads. International Journal of Mechanical Sciences, 61 (1), pp. 24-31. https://doi.org/10.1016/j.ijmecsci.2012.04.010