Effect of cutting parameters on workpiece and tool properties during drilling of Ti-6Al-4V

Basit Öğe Kaydı
dc.authorid0000-0003-1753-7712en_US
dc.contributor.authorÇelik, Yahya Hışman
dc.contributor.authorYıldız, Hakan
dc.contributor.authorÖzek, Cebeli
dc.date.accessioned2021-11-08T10:02:14Z
dc.date.available2021-11-08T10:02:14Z
dc.date.issued2016-05-23en_US
dc.departmentBatman Üniversitesi Mühendislik - Mimarlık Fakültesi Makine Mühendisliği Bölümüen_US
dc.description.abstractThe main aim of machining is to provide the dimensional preciseness together with surface and geometric quality of the workpiece to be manufactured within the desired limits. Today, it is quite hard to drill widely utilized Ti-6Al-4 V alloys owing to their superior features. Therefore, in this study, the effects of temperature, chip formation, thrust forces, surface roughness, burr heights, hole diameter deviations and tool wears on the drilling of Ti-6Al-4 V were investigated under dry cutting conditions with different cutting speeds and feed rates by using tungsten carbide (WC) and high speed steel (HSS) drills. Moreover, the mathematical modeling of thrust force, surface roughness, burr height and tool wear were formed using Matlab. It was found that the feed rate, cutting speed and type of drill have a major effect on the thrust forces, surface roughness, burr heights, hole diameter deviations and tool wears. Optimum results in the Ti-6Al-4 V alloy drilling process were obtained using the WC drillen_US
dc.identifier.citationÇelik, Y.H., Yıldız, H., Özek, C. (2016). Effect of cutting parameters on workpiece and tool properties during drilling of Ti-6Al-4V. Materials Testing, 58 (6), pp. 519-525. DOI:https://dx.doi.org/10.3139/120.110886en_US
dc.identifier.endpage525en_US
dc.identifier.issn0025-5300
dc.identifier.issue6en_US
dc.identifier.scopusqualityQ2en_US
dc.identifier.startpage519en_US
dc.identifier.urihttps://dx.doi.org/10.3139/120.110886
dc.identifier.urihttps://hdl.handle.net/20.500.12402/3884
dc.identifier.volume58en_US
dc.identifier.wosqualityQ2en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherDe Gruyteren_US
dc.relation.isversionof10.3139/120.110886en_US
dc.relation.journalMaterials Testingen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/restrictedAccessen_US
dc.rightsAttribution-NonCommercial-ShareAlike 3.0 United States*
dc.rights.urihttp://creativecommons.org/licenses/by-nc-sa/3.0/us/*
dc.titleEffect of cutting parameters on workpiece and tool properties during drilling of Ti-6Al-4Ven_US
dc.title.alternativeTi-6Al-4V'nin delinmesi sırasında kesme parametrelerinin iş parçası ve takım özelliklerine etkisien_US
dc.typeArticleen_US

Dosyalar

Lisans paketi
Listeleniyor 1 - 1 / 1
Küçük Resim Yok
İsim:
license.txt
Boyut:
1.44 KB
Biçim:
Item-specific license agreed upon to submission
Açıklama:
İndir

Koleksiyon

Mühendislik-Mimarlık Fakültesi Makine Mühendisliği Bölümü Makale Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu
WoS İndeksli Yayınlar Koleksiyonu