Investigating the effects of cutting parameters on the hole quality in drilling the Ti-6Al-4V alloy

Basit Öğe Kaydı
dc.authorid0000-0003-1753-7712en_US
dc.contributor.authorÇelik, Yahya Hışman
dc.date.accessioned2021-11-08T10:39:01Z
dc.date.available2021-11-08T10:39:01Z
dc.date.issued2014-10en_US
dc.departmentBatman Üniversitesi Mühendislik - Mimarlık Fakültesi Makine Mühendisliği Bölümüen_US
dc.description.abstractIn this study, the effects of cutting parameters on the surface roughness, burr height, hole-diameter deviation, cutting temperature and structure of a chip formation were investigated during the drilling of the Ti-6Al-4V alloy. For this purpose, the Ti-6Al-4V alloy was drilled at different cutting parameters, longitudinally in the 10 mm depth with Ø = 10 mm high-speed-steel (HSS) drills, having 90°, 118°, 130° and 140° point angles on the CNC vertical machining centre. Experiments were carried out at the (12.5, 18.75 and 25) m/min cutting speeds and the (0.05, 0.1 and 0.15) mm/r feed rates without using the cutting fluid. As a result, as the feed rate and the drill-point angle were increased, the surface roughness increased as well; however, as the cutting speed increased, the surface roughness decreased. When the feed rate and drill-point angle increased, the burr height decreased. On the other hand, an increase in the cutting speed increased the burr height. In general, an increase in the feed rate and drill-point angle increased the hole diameters, and the hole diameters obtained were close to the nominal size when the cutting speed was increased.en_US
dc.identifier.citationÇelik, Y.H. (2014). Investigating the effects of cutting parameters on the hole quality in drilling the Ti-6Al-4V alloy. Materiali in Tehnologije, 48 (5), pp.653-659.en_US
dc.identifier.endpage659en_US
dc.identifier.issn1580-2949
dc.identifier.issue5en_US
dc.identifier.scopusqualityQ3en_US
dc.identifier.startpage653en_US
dc.identifier.urihttps://hdl.handle.net/20.500.12402/3887
dc.identifier.volume48en_US
dc.identifier.wosqualityQ4en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherMateriali in Tehnologijeen_US
dc.relation.journalMateriali in Tehnologijeen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.rightsAttribution-NonCommercial-ShareAlike 3.0 United States*
dc.rights.urihttp://creativecommons.org/licenses/by-nc-sa/3.0/us/*
dc.subjectTi-6Al-4Ven_US
dc.subjectSurface Roughnessen_US
dc.subjectChipen_US
dc.subjectDrillingen_US
dc.subjectBurr Heighten_US
dc.subjectHole Diameteren_US
dc.titleInvestigating the effects of cutting parameters on the hole quality in drilling the Ti-6Al-4V alloyen_US
dc.title.alternativeTi-6Al-4V alaşımının delinmesinde kesme parametrelerinin delik kalitesi üzerindeki etkilerinin araştırılmasıen_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim
İsim:
INVESTIGATING THE EFFECTS OF CUTTING.pdf
Boyut:
1.41 MB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin / Full Text
İndir
Lisans paketi
Listeleniyor 1 - 1 / 1
Küçük Resim Yok
İsim:
license.txt
Boyut:
1.44 KB
Biçim:
Item-specific license agreed upon to submission
Açıklama:
İndir

Koleksiyon

Mühendislik-Mimarlık Fakültesi Makine Mühendisliği Bölümü Makale Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu
WoS İndeksli Yayınlar Koleksiyonu