4 sonuçlar
Arama Sonuçları
Listeleniyor 1 - 4 / 4
Öğe Diesel engine applications for evaluation of performance and emission behavior of biodiesel from different oil stocks(Environmental Progress & Sustainable Energy, 2015-05) Aydın, Hüseyin; Behçet, Rasim; İlkılıç, Cumali; İşcan, Bahattin; Aydın, SelmanExtensive researches on alternative fuels have been carried out since the fossil-based fuels are limited. Many of these studies have ever been on the usability of vegetable oils in diesel engines. In the current work, biodiesel were produced from waste fish oil (FOB), hazelnut oil (HOB), rapeseed oil (ROB), and waste cooking oil (WCOB) by transesterification method. The same optimized variables of 6:1 methanol/oil molar ratio (mol/mol), 0.4% sodium methoxide concentration (wt.%), 60°C reaction temperature, 1000 rpm agitation speed and 2 h reaction time conditions were performed for biodiesel production from all kinds of above mentioned oils. Some of the important chemical and physical properties of test fuels were found. Without making blends with diesel fuel, pure biodiesels were used in a diesel engine in order to clarify how their usage effects on engine performance and exhaust emission parameters. When compared with those of diesel fuel, average torque and power were reduced while brake specific fuel consumption was increased for biodiesels. Besides, carbon monoxide (CO), hydrocarbon (HC) emissions were considerably lower for biodiesel usage while oxides of nitrogen (NOx) emissions were higher than that of diesel fuel. Furthermore, emissions of carbon dioxide (CO2) and smoke opacity were reduced for biodiesel usage. Oxygen (O2) contained in the exhaust gases were higher for biodiesels while they contain more oxygen molecules in their structureÖğe The effect of n-butanol additive on low load combustion, performance and emissions of biodiesel-diesel blend in a heavy duty diesel power generator(Elsevier, 2017-04) Işık, Mehmet Zerrakki; Bayındır, Hasan; İşcan, Bahattin; Aydın, HüseyinDiesel power generators are often used under partially load conditions. Especially, under low load conditions, it is crucial to find a solution for their considerably high brake specific fuel consumption (bsfc) and exhaust output emissions. Other points are the usability of waste cooking oil and an oxygenated alternative fuel in low load conditions of diesel generator. In this point of view, 10% n-butanol and 10% biodiesel mixture was blended with 80% of ultra low sulfur diesel fuel named here as BB20 was used and comparisons have been made with 20% biodiesel/80% diesel fuel named here as B20 and ultra low sulfur diesel fuel named here as (D2). Previously, main important physical and chemical fuel properties of test fuel have been found. These fuels were tested in low load operations of a diesel engine generator in order to find out the effects of blend fuels on combustion characteristics, performance and emissions of the test engine. The test results are presented in this paper and seem to raise quite interesting points. Butanol addition to diesel and biodiesel blends can be considered as a good solution for reducing density, viscosity and thus sustainable usability of biodiesel and increase thermal efficiency and lower carbon monoxide (CO) and oxides of nitrogen (NOx) under comparatively lower load conditions in diesel power generator engines.Öğe Combustion, performance, and emissions of safflower biodiesel with dimethyl ether addition in a power generator diesel engine(Taylor & Francis, 2020-04-29) Aydın, Hüseyin; Işık, Mehmet Zerrakki; İşcan, Bahattin; Topkaya, HüsnaIn this study, the effect of dimethyl ether (DME) addition to diesel (ultralow sulfur diesel fuel) and biodiesel fuels on the combustion, performance, and emissions of a diesel-powered generator was investigated. For this purpose, fuel samples of the ternary blend that volumetrically composed of 10% safflower biodiesel–10% dimethyl ether–80% ultralow sulfur diesel fuel (B10DME10), the ternary blend that volumetrically composed of 25% safflower biodiesel–25% dimethyl ether–50% ultralow sulfur diesel fuel (B25DME25), the binary blend that volumetrically composed of 25% safflower biodiesel–75% ultralow sulfur diesel fuel (B10DME10) B25, and pure safflower oil biodiesel (B100) and standard ultralow sulfur diesel (D2) were prepared. The test engine was loaded by power drawing from the generator by the usage of equivalent powered electrical heating resistances. Generally, using DME with biodiesel improved the combustion properties of biodiesel blends that can be attributed to the lower viscosity of DME. The maximum cylinder pressure was obtained for B10DME10 in general and sometimes for B25DME25. When test fuels are compared, DME blends showed higher and earlier peaks of heat release compared to diesel and biodiesel blend fuels especially. It was found that combustion is more efficient from mass fuel consumption (MFC) and brake specific fuel consumption (BSFC) values in the use of DME than biodiesel. BSEC values of using DME in the blends considerably decreased that it is the proof of improved combustion and energy efficiency. The highest average efficiency values were obtained for B25DME25 as 28.3% although it has a lower calorific value than D2 due to the considerably improved combustion properties of DME, while the average efficiency values were 23.1%, 23.3%, and 20.7% for D2, B25, and B100 fuels, respectively. Highest carbon monoxide (CO) emissions were obtained in the use of pure biodiesel, while the lowest CO emissions were obtained in the use of DME. The addition of DME is seen to increase the nitrogen oxides (NOx) and CO emissions.Öğe Improving the usability of vegetable oils as a fuel in a low heat rejection diesel engine(Elsevier, 2012-06) İşcan, Bahattin; Aydın, HüseyinUsability of a waste vegetable oil in coated diesel engines was experimentally investigated. Waste corn oil was blended with petroleum diesel fuel by ratios of 15% corn oil to %85 diesel fuel (B15), 35% corn oil to %65 diesel fuel (B35) and 65% corn oil to %35 diesel fuel (B65). The surfaces of the engine piston and both intake and exhaust valves were coated with ZrO 2 layer in order to make the combustion chamber insulated. Thus heat transfer through the combustion chamber was aimed to be reduced with the purpose of increasing the thermal efficiency and performance of the engine and also maintain the usability of vegetable oil in diesel engines. B15, B35, B65 and standard diesel fuels were used in the coated test engine. Performance parameters and exhaust emissions characteristics of all the above mentioned fuels were clarified and compared with uncoated engine test values of normal diesel fuel. It is believed that the main purpose of this study has been achieved as the engine performance parameters such as power and torque of the engine were increased with simultaneous decreases in the brake specific fuel consumption (bsfc). Besides, many of exhaust emission parameters such as CO, HC, and smoke opacity were decreased.
