5 sonuçlar
Arama Sonuçları
Listeleniyor 1 - 5 / 5
Öğe Exhaust emissions of a CI engine operated with biodiesel from rapeseed oil(Taylor & Francis, 2011-01-16) Aydın, Hüseyin; İlkılıç, CumaliIn this study, biodiesel was produced from rapeseed oil and was used in a single cylinder, naturally aspirated and direct-injected diesel engine as pure biodiesel (B100) and as a blend with standard diesel fuel by 20% biodiesel to 80% diesel fuel (B20). The diesel engine emissions and some performance parameters were investigated at fully loaded engine conditions. The effects of pure biodiesel and its blend with diesel fuel on emissions of carbon monoxide (CO), nitrogen oxides (NOx), carbon dioxide (CO2), and sulfur dioxide (SO2) were clarified. Results showed that biodiesel fuel is environmentally friendly since it reduced the emissions of CO, SO 2, and CO2 of engines at all speeds. Results also indicated that the pure biodiesel gave about 12% lower power and 20 to 25% higher fuel consumption as compared to diesel. However, the results were almost the same or slightly different from a blend of biodiesel-diesel and petroleum diesel fuel.Öğe Analysis of combustion, performance and emission characteristics of a diesel engine using low sulfur tire fuel(Elsevier, 2015-03-01) Aydın, Hüseyin; İlkılıç, CumaliAn alternative fuel for diesel engines was produced from waste vehicle tires by the method of pyrolysis. In order to reduce sulfur content of produced the liquid fuels, during the reaction Ca(OH) 2 was used. Then, H 2 SO 4 were used after the reaction and the sulfur content of the product was reduced by 83.75%. The properties of diesel fuel, low sulfur tire fuel and fuel mixtures of low sulfur tire fuel and diesel fuel were found. Then the prepared fuel blends and diesel fuel were tested in a diesel engine. Performance, combustion and emission parameters of the engine when using each fuel were obtained and comparisons were made with D2 fuel. Power, torque and mean effective pressure, mass fuel consumption, effective efficiency and bscf values presented. Results justify that the performance of the engine slightly lowers by using blends of LSTF. Cylinder pressure and heat release rate values of the test fuels usage were quite similar with those of D2. CO, HC, and smoke emissions were slightly higher while NOx emissions were lower for LSTF blends. All of these results indicate that desulfurized tire fuels with low percentages can be used as alternative fuel in diesel engine.Öğe The harmful effects of diesel engine exhaust emissions(Taylor & Francis, 2012-03-16) İlkılıç, Cumali; Aydın, HüseyinWith the increase in the number of engine vehicles, air pollution is also increasing quickly; and with the increase in air pollution, all living conditions are affected in a negative way. Diesel engines also cause air pollution, which adversely affects human health and is becoming a permanent problem. A single-cylinder diesel engine was used in this work; the exhaust gas emissions, in different speed ranges, were investigated. These emissions are carbon monoxide emissions (CO), nitrogen oxides (NO x), oxygen (O 2), and carbon dioxide (CO 2). The amount of the changes in emissions was evaluated in terms of air pollution with graphics.Öğe Effect of ethanol blending with biodiesel on engine performance and exhaust emissions in a CI engine(Elsevier, 2010-02-02) Aydın, Hüseyin; İlkılıç, CumaliThe use of biodiesel as an alternative diesel engine fuel is increasing rapidly. However, due to technical deficiencies, they are rarely used purely or with high percentages in unmodified diesel engines. Therefore, in this study, we used ethanol as an additive to research the possible use of higher percentages of biodiesel in an unmodified diesel engine. Commercial diesel fuel, 20% biodiesel and 80% diesel fuel, called here as B20, and 80% biodiesel and 20% ethanol, called here as BE20, were used in a single cylinder, four strokes direct injection diesel engine. The effect of test fuels on engine torque, power, brake specific fuel consumption, brake thermal efficiency, exhaust gas temperature, and CO, CO2, NOx and SO2 emissions was investigated. The experimental results showed that the performance of CI engine was improved with the use of the BE20 especially in comparison to B20. Besides, the exhaust emissions for BE20 were fairly reduced.Öğe Emissions from an engine fueled with biodiesel-kerosene blends(Taylor & Francis, 2011-01) Aydın, Hüseyin; Bayındır, Hasan; İlkılıç, CumaliBiofuels are renewable energy sources for internal combustion engines and they have low emissions. They are increasingly used as an alternative to petroleum fuels. In this work, three different fuel types, such as commercial diesel fuel (D2), 20% biodiesel and 80% diesel fuel called here as B20, and 80% biodiesel and 20% kerosene, called here as BK20, were used in a single cylinder, four stroke, direct injection compression ignition engine. Kerosene was used as an additive to approach the properties of biodiesel to D2. The effects of the blends on CO, NOx, and smoke emissions as well as on some of the performance parameter of the engine were investigated. The prepared fuel, BK20 blend, has almost the same fuel properties as conventional diesel fuel. The experimental results showed that the exhaust emissions for BK20 were fairly reduced as compared to diesel fuel as well as B20. Besides, the performance of CI engine was improved with the use of the BK20, especially in comparison to B20. Results suggest that the BK20 can be substituted to the petroleum-based diesel fuel in diesel engines.
