12 sonuçlar
Arama Sonuçları
Listeleniyor 1 - 10 / 12
Öğe An experimental investigation of the effect of thermophysical properties on time lag and decrement factor for building elements(Gazi University, 2020-06-01) Oktay, Hasan; Yumrutaş, Recep; Argunhan, ZekiThe time lag (TL) and decrement factor (DF) are essential for the heat storage capabilities of building elements, which strictly depend on the thermophysical properties of the elements. Many investigations are presented in literature arguing to find the influence of each thermophysical property on TL and DF by keeping the other properties constant. This study aims to investigate the effect of each property on TL and DF, utilizing relationships between the measurement values of the thermophysical properties of wall materials. Therefore, first, 132 new concrete wall samples were produced, and their thermophysical properties were tested. Secondly, TL and DF values for each building element are computed from the solution of the problem by Complex Finite Fourier Transform (CFFT) technique. Finally, a multivariate regression analysis has been performed, and the variations of each thermophysical property versus TL and DF are presented, and also the findings are compared with literature. The results show that each property alone (keeping the other properties constant) is not adequate to identify the thermal inertia and thermal performance of a wall element. Besides, 87.3 % decrease in thermal diffusivity corresponds to 6.03 h increase in the value of TL and 88.8 % decrease in value of DF; respectively, for W1 wall assembly.Öğe Dimension and insulation thickness optimization of circular flat plate solar collectors(Energy Education Science and Technology, 2011) Argunhan, ZekiIn this study, expressions for optimum radius of a circular flat plate solar collector and the optimum insulation thickness distribution are derived by using the concept of solar gain, which maximizes the life-cycle savings. For the specified condition the optimum radius has been found as 2.14 m and the optimum insulation thickness distribution on back of collectors has been formulized. The insulation material thickness distribution has been determined by performing a detailed dimensional analysis; therefore heat loss is minimized, and results are presented in graphics.Öğe Experimental investigation of the effects of diesel-like fuel obtained from waste lubrication oil on engine performance and exhaust emission(Journals & Books, 2010-10) Argunhan, Zeki; Yumrutaş, Recep; Arpa, OrhanIn this study, effects of diesel-like fuel (DLF) on engine performance and exhaust emission are investigated experimentally. The DLF is produced from waste engine lubrication oil purified from dust, heavy carbon soot, metal particles, gum-type materials and other impurities. A fuel production system mainly consisting of a waste oil storage tank, filters, a reactor, oil pump, a product storage tank, thermostats and control panel is designed and manufactured. The DLF is produced by using the system and applying pyrolitic distillation method. Characteristics, performance and exhaust emissions tests of the produced DLF are carried out at the end of the production. The characteristic tests such as density, viscosity, flash point, heating value, sulfur content and distillation of the DLF sample are performed utilizing test equipments presented in motor laboratory of Mechanical Engineering Department, University of Gaziantep, Turkey. Performance and exhaust emission tests for the DLF are performed using diesel test engine. It is observed from the test results that about 60 cc out of each 100 cc of the waste oil are converted into the DLF. Characteristics and distillation temperatures of the DLF are close to those values of a typical diesel fuel sample. It is observed that the produced DLF can be used in diesel engines without any problem in terms of engine performance. The DLF increases torque, brake mean effective pressure, brake thermal efficiency and decreases brake specific fuel consumption of the engine for full power of operation.Öğe Dairesel kesitli bir borunun girişine yerleştirilen delikli sabit kanatçıklı dönme üreticinin ısı geçişi ve basınç düşüşüne etkileri(Pamukkale Üniversitesi, 2006-02-01) Argunhan, Zeki; Yıldız, CengizBu çalışmada iç içe borulu ısı değiştirgecinde farklı delik sayılı dönme üreticilerin ısı transferine ve basınç düşüşüne etkisi deneysel olarak araştırılmıştır. Bu amaçla değiştirgecin 60 mm çapındaki iç borunun girişine 55º kanat açısına sahip ve kanatlarında birer, ikişer, üçer ve dörder adet dairesel delikler bulunan dönme üreticiler yerleştirilerek deneyler yapılmıştır. Bunlar iç borunun girişine rahat takılıp sökülebilecek şekilde dizayn edilmişlerdir. İç borunun içinden sıcak akışkan olarak hava, iç borunun dışından ise soğuk akışkan olarak su geçmektedir.Öğe Second Law analysis in concentric heat exchangers with vortex flow generators(Energy Education Science and Technology, 2011) Argunhan, Zeki; Çakmak, Gülşah; Yıldız, Cengiz; Behçet, RasimIn the present study, the experimental results of heat transfer of a concentric tube heat exchanger were analyzed with respect to Second Law of Thermodynamics to reach the geometric optimal design of the heat exchangers. In order to increase the heat transfer, the vortex generators were placed in the entrance of the inner pipe of the heat exchanger. These vortex generators are 60 mm in diameter having six angled (55°, 65°, 75°, 90°) winglets. The winglets have one rectangular slot in each and are 2×7 mm in dimensions. Experiments were carried out with different Reynolds Numbers. Air as hot fluid and water as cold fluid were passed through the inner pipe and outer pipe of the concentric tube heat exchanger, respectively. The variations of the efficiency and Entropy Generation Number with respect to Reynolds Number are shown in graphics, and the results were discussed.Öğe Comparison of heat gain values obtained for building structures with real and constant properties(Bitlis Eren Üniversitesi, 2019-12-24) Oktay, Hasan; Yumrutaş, Recep; Argunhan, ZekiThe magnitude of energy consumption due to the heating and cooling of buildings has led to the demand for increasing the thermal performance of building structures. Many investigations are presented in literature arguing to find the effect of each thermophysical property on the thermal characteristics of building components, while the properties have been assumed as independent of each other. In this context, this paper focuses on the effect of each property on heat gain value utilizing relationships between the measurement values of the thermophysical properties of building structures. In the previous study, 102 new wall samples were produced, their thermophysical properties were tested and expressions among these properties are obtained. In this study, the heat gain values through the structures are computed using the solution of the transient heat transfer problem by using both the obtained expressions between the thermophysical properties and assumptions proposed from the literature. Results obtained for varying and constant thermophysical properties have been compared with those values presented in the literature. The results show that the assumptions are not realistic in a significant number of cases. Moreover, if one of the thermophysical properties of a material is known, heat gain values can be calculated easily for the selected wall or roof types.Öğe The effect of rotary type turbulator placed in entrance of heat exchanger on heat transfer and frictional loss(Energy Education Science and Technology, 2011) Argunhan, Zeki; Behçet, Rasim; Yakut, Ali KemalIn this study, improving heat transfer in heat exchangers with paralel flow is gained by using swirl flow. For this purpose, a propeller type of turbulator was placed in the entrance of interior pipe of heat exchanger with paralel flow and the effect of turbulator on the heat transfer and friction losses in steady conditions was experimentally investigated. The effect of production of turbulance for improvement of heat transfer in interior pipe flows and the effects of turbulator on heat transfer and pressure drop are experimentally researched by placing a propeller type of turbulator at the entrance of heat exchanger to produce swirl air flow. In experiment setup, water was used as the fluid on which the heat was transferred and air was used as the fluid from which heat was transferred to the water. By usage of datas obtained from experimental measurements were calculated for Reynolds number ranging from 8000 to 24000 necessary relationships effet on heat transfer and pressure drop. In comparison with empty pipe it was seen that the heat transfer increased at range between 25,5%- 50,3% and the friction losses increased 5 times. Besides, by analyzing the system exergy, the dependence of non-dimensional exergy loss on Reynolds number was drawn to investigate whether this improvement technique is advantageous thermodynamically or not. When comparing the exergy losses in empty pipe and the pipe with a turbulator at approximately same Reynolds numbers, it was seen that exergy loss is 15% higher for empty pipe than that for the pipe with the turbulator. As a result of that information, the improvement technique was proved to be advantageous in thermodynamic manner too. By the usage of turbulator that results in the partial recovery of loss energy, it was proven that the improvement technique was thermodynamically advantageousÖğe Effect of swirl generators with different sized propeller on heat transfer enhancement(Energy Education Science and Technology, 2011) Argunhan, Zeki; Yıldız, Cengiz; Çakmak, GülşahIn this study, the swirl flow that is one of the passive methods is used for increasing the heat transfer coefficient in the concentric heat exchangers. For this purpose, propeller type swirl generators were prepared to test in the experiments. So, the effect of propellers placed in the inner pipe of the concentric heat exchangers on the heat transfer and pressure drop was investigated experimentally. Experiments were undertaken for the Reynolds Number range of 4000-12000 and for both parallel and counter-flow. It is shown that, the propellers rotated freely with the effect of fluid flowed in the inner pipe are swirling flow generator and they have improved heat transfer. In addition that up to 50% enhancements could be accomplished in heat transfer rates with the swirl generators compared to without the swirl generators. In the parallel flow mode, the enhancement was 10% lower than that of counter-flow at the same Reynolds number. On the other hand the pressure losses increase approximately 3 times more than the empty tube related to Reynolds numbers and propeller sizes. As an outcome of the study, the results showed that a rather smaller size but the same capacity heat exchanger could be proposed by using these elements imposing swirling to the fluid flowing through inner pipe.Öğe Yapı elemanlarında kullanılan atık lastiklerin ısıl performansının incelenmesi(Dicle Üniversitesi, 2017-07-01) Argunhan, ZekiDünya üzerinde atık olarak değerlendirilen maddelerin büyük bir kısmı geri dönüştürülebilir malzemelerden oluşmaktadır. Atık ya da atıl malzemelerin depolanması ya da uzaklaştırılması Türkiye ve Dünyada geleceğin en büyük problemlerinden biri olarak görülmektedir. Bu problemin en mantıksal çözümlerinden biri atık ya da atıl malzemelerin yeniden kullanılabilirliğinin sağlanabilmesidir. Bir endüstriyel atık olan lastiklerin, beton özeliklerini geliştirmek amacıyla betonun içine katılması oldukça yaygın olarak kullanılmaktadır. Bu doğrultuda, bu çalışmada, enerji verimli binalar için nispeten yüksek mukavemet, düşük yoğunluklu, yüksek ısı ve ses yalıtımı olan yeni beton tipleri elde etmek için deneysel bir çalışma gerçekleştirilmiştir. Bu amaçla, sabit su-çimento oranında, normal agrega yerine hacimce %10, %20, %30, %40, %50 ve %60 oranlarında atık lastik agregası kullanılarak çeşitli beton numuneleri hazırlanmıştır. Deneysel çalışmalarda birim ağırlıkları değişen toplam 6 seri beton üretilmiştir. Üretilen tüm numunelerin mekanik testleri yapılmış ve ısıl özellikleri sıcak disk yöntemi ile ASTM ve EN standartlarına uygun olarak belirlenmiştir. Deneysel çalışmaların sonuçlarına göre kullanılan agreganın elde edilen betonun mukavemetini ve yoğunluğunu düşürdüğü, buna karşı ısı ve ses yalıtım özelliğini yüksek oranda arttırdığı görülmüştür. Bu çalışmada dünyada ve ülkemizdeki endüstriyel atık ürünlerinin mühendislik çalışmalarındaki sonuçları derlenerek yorumlanmıştır.Öğe Comparison of thermal performance of newly produced lightweight wall and roof elements for energy-efficient buildings(Hitit Üniversitesi, 2020-03-01) Oktay, Hasan; Yumrutaş, Recep; Argunhan, ZekiIn this study, both experimental and theoretical investigations are performed to obtain new concrete types with high thermal insulating characteristics for energy-efficient buildings. In this regard, 102 new concrete wall samples were produced using different aggregates at different volume fractions, and their thermophysical properties were tested according to EN and ASTM standards. The experimental research focused on developing new wall or roof types with higher thermal insulation properties in order to reduce the energy consumption of buildings due to heating or cooling. In order to specify the thermal performance of developed lightweight concretes, an analytical solution method is developed by the Complex Finite Fourier Transform CFFT method to estimate heat gain utilizing measured thermophysical properties data of those samples. The results indicated that the reduction in heat gain value was obtained as 83.21 % for the PC100 wall corresponding to conventional concrete. Consequently, the thermal insulation effect of those samples shows excellent potential for development.
