2 sonuçlar
Arama Sonuçları
Listeleniyor 1 - 2 / 2
Öğe Electrical properties of safranine T p Si organic inorganic semiconductor devices(Cambridge University, 2010-04-25) Güllü, Ömer; Asubay, Sezai; Biber, Mehmet; Kılıçoğlu, Tahsin; Turut, AbdulmecitWe investigated the current-voltage (I-V) and capacitance-voltage (C-V) characteristics of identically prepared safranine T/p-Si organic/inorganic Schottky devices (total 26 diodes) formed by evaporation of organic compound solution on p-Si semiconductor substrate. It was seen that the safranine T organic thin film on the p-Si substrate showed a good rectifying behavior. The barrier heights and ideality factors of all devices were extracted from the electrical characteristics. The mean barrier height and mean ideality factor from I-V measurements were calculated as 0.59±0.02 eV and 1.80±0.20, respectively. Also, the mean barrier height and mean acceptor doping concentration from C-V measurements were calculated as 0.67±0.10 eV and (6.96±0.37)×1014 cm-3, respectively. The discrepancy in the barrier height values obtained from I-V and C-V characteristics has been attributed to different nature of the measurements. The discrepancy between these values can also be due to the existence of the interfacial native oxide and the organic safranine T thin layer between the semiconductor substrate and top contact metal.Öğe Determination of the laterally homogeneous barrier height of thermally annealed and unannealed Au/p-InP/Zn-Au Schottky barrier diodes(Elsevier, 2008-03-25) Güllü, Ömer; Turut, Abdulmecit; Asubay, SezaiWe have identically prepared Au/p-InP Schottky barrier diodes (SBDs). The diodes were annealed up to 400 °C thermally. The barrier height (BH) for the as-deposited Au/p-InP/Zn-Au SBDs from the current–voltage characteristics have varied from 0.58 to 0.72 eV, and ideality factor n from 1.14 to 1.47. The BH for the annealed SBDs from the current–voltage characteristics have varied from 0.76 to 0.82 eV, and ideality factor n from 1.17 to 1.39. As a result of the thermal annealing, it has been seen that the BH values of the annealed SBDs are larger than those of the as-deposited SBDs. We have determined a lateral homogeneous BH value of 0.72 eV for the as-deposited Au/p-InP SBD from the experimental linear relationship between barrier heights and ideality factors, and a value of 0.85 eV for the annealed Au/p-InP SBD. The increase of 0.13 eV in the BH value by means of 400 °C annealing has been ascribed to the formation of the excess charges that electrically actives on the semiconductor surface.
