9 sonuçlar
Arama Sonuçları
Listeleniyor 1 - 9 / 9
Öğe Effects of cutting parameters and point angle on thrust force and delamination in drilling of CFRP(De Gruyter, 2014-11-14) Çelik, Yahya Hışman; Kılıçkap, Erol; Yardımeden, AhmetParts made of composite materials are generally produced by near-net-shape technology. However, additional machining operations such as drilling are often required to facilitate components assembling. Drilling of composite materials is also a common process in the assembly of aerospace and automotive composite structures. During drilling, unlike the conventional materials, a few damage forms may take place. Among these damage forms, the delamination is the most important one. Therefore, the experimental studies carried out on drilling of CFRP composite materials for determining optimum processing parameters are of great importance. In this particular study, delamination in CFRP composites caused by drilling was investigated. The composite material was drilled under various spindle speeds, feed rates and drill point angles. The results showed that delamination and thrust forces were affected by cutting parameters. It was demonstrated that feed rate and drill point angle make the largest contribution to the overall performance.Öğe G10 Epgc 201 kompozit malzemenin delinmesinde oluşan deformasyona etki eden parametrelerin araştırılması(Gazi Üniversitesi, 2012) Çelik, Yahya Hışman; Kılıçkap, ErolÖğe Elyaf takviyeli kompozitlerde elyaf yönlendirme açısının çekme ve eğilme dayanımına etkisi(Batman Üniversitesi, 2018) Çelik, Yahya Hışman; Kılıçkap, Erol; Yenigün, BurakÖğe Effects of natural hard shell particles on physical, chemical, mechanical and thermal properties of composites(SAGE Journals, 2021-05-31) Çelik, Yahya Hışman; Çelik, Kadir Serdar; Kılıçkap, ErolShelled herbal foods are widely consumed. The evaluation of the shells of these foods is important due to their features such as low cost, ease of recycling and environmental friendliness. In this study, hazelnut shell (HS), pistachio shell (PS), and apricot kernel shell (AKS) were brought to powder particles by grinding to dimensions of 300–425 µm. Some of the powder particles were converted into ash at 900°C. The amounts of cellulose, ash, humidity, and metal in these particles via chemical analyses were determined, while their structural properties via X-Ray Diffraction (XRD) and Fourier Transform Infrared Spectroscopy (FT-IR) analyses. Composite materials were produced by adding 15 wt.% to the polyester matrix material from these powder particles and ashes. Compression strength, hardness, specific weight, and thermal conductivity of these composites were analyzed. The lowest and highest humidity, ash, cellulose, hemicellulose, and lignin ratios in powders showed differences depending on the type of powders. The amount of Sn and K in the HS, PS, and AKS powders were close to each other, while the amount of Ca, Na, Mg, Fe, Mn, Cu, Zn and Si was higher in AKS powder. The reinforcement adding to the polyester increased the compression strength, hardness, specific weight and thermal conductivity properties.Öğe KETP kompozitlerin delinmesinde elyaf yönlendirme açısının kesme kuvvetine etkisi(Batman Üniversitesi, 2018) Çelik, Yahya Hışman; Yenigün, Burak; Kılıçkap, ErolÖğe AL/SiC Kompozit malzemenin delinmesinde yüzey pürüzlülüğünün bulanık mantıkla modellenmesi(Dicle Üniversitesi, 2016) Çelik, Yahya Hışman; Yenigün, Burak; Kılıçkap, ErolBu çalışmada, sıkıştırma döküm yöntemiyle üretilmiş SiC takviyeli Al esaslı kompozit kullanılmıştır. Üretilen kompozit malzeme farklı uç açılarına sahip HSS takımlar kullanılarak; farklı delme parametrelerinde delme işlemine tabi tutulmuştur. Her bir delme işlemi için delme yüzeylerinin yüzey pürüzlülükleri ölçülmüştür. Elde edilen veriler bulanık mantığa uygulanarak yüzey pürüzlülüğünün modellenmesi yapılmıştır. Veriler incelendiğinde, en iyi yüzey pürüzlülüğü 90˚ uç açısına sahip takım kullanılarak 1500 dev/dak dönme devri ile 0.05 mm/dev ilerleme değerinde elde edilmiştir. En kötü yüzey pürüzlülüğü ise 118˚ uç açılı takımın 2000 dev/dak dönme devri ile 0.15 mm/dev ilerleme değerinde elde edilmiştir. Bulanık mantık kullanılarak elde edilen tahmini değerlerin deney sonuçlarına yakın değerler verdiği görülmüştürÖğe Effect of matrix material and orientation angle on tensile and tribological behavior of jute reinforced composites(De Gruyter, 2019-07-27) Çelik, Yahya Hışman; Demir, Mehmet Emin; Kılıçkap, ErolEnvironmental friendly natural fibers have been used instead of petroleum-based synthetic fibers as reinforcements because of the depletion of oil resources, plastic waste disposal problems and the emissions generated during combustion. In these natural fibers, thermoplastic or thermoset materials are used as matrix material because of their low cost, light weight and durability. In this study, the effects of ply number (2 and 3 layer) and orientation angle of reinforcement (0/90° and ± 45°) and matrix type (thermoset and thermoplastic) on the tensile strength of jute reinforced composites were investigated. Also, the effect of the reinforcement orientation angle, sliding time (600, 1200 and 1800 s) and applied load (5, 10 and 15 N) on tribological characteristics were determined. Adhesive and abrasion wear tests were carried out at 0.15 m × s−1 sliding speed. It was observed that the matrix material and the reinforcement are very important in tensile and wear tests, while the ply number and the orientation angle only exert an influence in the tensile strength of composites. It was determined that an increase in load and sliding time is the most effective parameter on wear experiments.Öğe Kayısı çekirdeği kabuğu takviyeli kompozitlerin üretimi ve mekanik özelliklerinin belirlenmesi(IESS Publishing, 2019-06) Çelik, Yahya Hışman; Demir, Mehmet Emin; Kılıçkap, Erol; Yalçın, RojinÖğe Jüt takviyeli polimer matrisli kompozitlerin çekme dayanımlarının araştırılması(Batman Üniversitesi, 2018) Çelik, Yahya Hışman; Demir, Mehmet Emin; Kılıçkap, Erol
