Arama Sonuçları

Listeleniyor 1 - 3 / 3
  • Öğe
    Effect of seawater on pin-loaded laminated composites
    (De Gruyter, 2018-01) Deniz, Mehmet Emin; Karakuzu, Ramazan; Kanlıoğlu, Halit
    The aim of this study was to investigate the effect of seawater on bearing strength of glass-epoxy laminated composites. The ratio of the edge distance to pin diameter (E/D) was changed from 1 to 5 and that of the specimen width to pin diameter (W/D) was selected as 3 and 4 for this study. The hole of the specimen was subjected to a traction force induced by a pin. Laminated composite plates were manufactured at the Company Izoreel Composites. Tension tests were performed on pinned joint specimens with a stacking sequence of [0/90]3S. The specimens were immersed in seawater of the Aegean Sea having a salinity of about 3.5 wt.-% in a glass aquarium at laboratory for 1, 3, 6, 9 and 12 months. For each period of immersion time, failure modes and maximum failure loads of the specimens were found experimentally. The maximum reduction of the bearing strength was obtained as 38% for E/D = 3 and W/D = 3 due to the seawater effect.
  • Öğe
    Tabakalı kompozit plakların darbe davranışı üzerine deniz suyu etkisinin araştırılması
    (Batman Üniversitesi, 2017) Karakuzu, Ramazan; Çalık, İsmail Cihan; Deniz, Mehmet Emin
    Bu çalışmanın amacı, [0°/30°/60°/90°]s oryantasyonuna sahip cam lifi-epoksi tabakalı kompozit plakların darbe davranışı üzerine deniz suyunun etkisini araştırmaktır. Bu sebeple 100 x 100 mm boyutlarında 2,9 mm kalınlığında 135 adet numune hazırlanmıştır. Numunelerin darbe deneyleri Fractovis Plus darbe test cihazı kullanılarak gerçekleştirilmiştir. Çalışma beş aşamadan oluşmaktadır. Her bir aşamada 27 numune kullanılmıştır. İlk aşamada deniz suyu görmemiş (kuru) numunelerin testi yapılmış daha sonra geri kalan dört aşamada deniz suyunda bekletilmiş numunelerin testleri yapılmıştır. Numunelerin deniz suyunda bekletilme zamanları 1, 3, 6 ve 9 ay olarak seçilmiştir. Darbe testleri, 10 J, 20 J, 30 J enerjilerinde ve 5 kg, 10 kg, 15 kg vurucu kütlerinde gerçekleştirilmiştir. Testlerin sonucunda, absorbe edilen enerji, maksimum çökme miktarları ve hasar alanlarının deniz suyunda bekletilme zamanına bağlı olarak değişimleri grafikler yardımıyla verilmiştir. Elde edilen sonuçlar kompozit plakların darbe davranışı üzerine deniz suyundaki tuzun, darbe enerjisinin ve darbe ucu kütlesnin önemli etkisinin olduğunu göstermiştir.
  • Öğe
    Environmental effects on mechanical properties of glass-epoxy composites
    (De Gruyter, 2014-05) Deniz, Mehmet Emin; Karakuzu, Ramazan; Kanlıoğlu, Halit
    This study presents the effects of seawater and distilled water immersion time periods on mechanical properties of unidirectional glass reinforced epoxy composites. Tension, compression, and shear test specimens exposed to seawater and distilled water were prepared according to ASTM standards. After tests, SEM imaging of fracture surface of specimens was made. Results showed that seawater and distilled water immersion time affects significantly mechanical properties and strength values of glass-epoxy composites.