4 sonuçlar
Arama Sonuçları
Listeleniyor 1 - 4 / 4
Öğe The efficiency of Al2O3 water nanofluid on a flat plate solar collector(SETCOR publications, 2015) Budak Ziyadanoğulları, Neşe; Yıldız, Cengiz; Argunhan, Zeki; Tekalp, Selen; Yücel, Halit LutfiSolar collectors are particular kind of heat exchangers that transform solar radiation energy into internal energy of the transport medium. One of the most effective methods is replacing the working fluid (water, ethylene glycol, engine oil…) by developing a new class of fluids with a higher thermal conductivity for thermal systems. In the present work the effect of Al2O3-water, as working fluid, on the efficiency of a flat plate solar collector is investigated experimentally. The mass flow rate of nanofluid is 150 Lit/h. The volume fraction of the nanoparticles is 0.2 %, 0.4 % and 0.8 % respectively. The results reveal the impact and importance of each of these parameters. Experimental results reveal that utilizing the nanofluid increases the collector efficiency in comparison to water as an absorbing mediumÖğe Konsantrik boru tip ısı değiştiricilerinde türbülatörlerin kanat delik geometrisinin ısı transferine ve basınç düşüşüne etkisi(Fırat Üniversitesi, 2011) Işık, Mehmet Zerrakki; Argunhan, Zeki; Yıldız, CengizThe effect of wing hole geometry of the vortex generator on heat transfer and pressure drop in concentric tube type heat exchangers has been investigated in this study.For experiments, two type of hole geometrywereselected.One has four rectengular hole with 2x7mm in dimension andthe other four circular hole with 5mm in diameter andapplied for 55-65-75-90 degree blade angles. Turbulator diameter is 60 mm and includes 6 blades. Air was used as hot stream, whereas water as cold stream. Experimental results were scrutinized.Heat transfer and pressure drop werefound high with usage of circular holes geometry.Öğe The experimental study of nanofluids on a flat-plate solar collector(Fırat Üniversitesi, 2017) Budak Ziyadanoğulları, Neşe; Yücel, Halit Lutfi; Yıldız, Cengiz; Işık, Mehmet KemalSolar collectors are particular kind of heat exchangers that transform solar radiation energy into internal energy of the transport medium. One of the most effective methods is replacing the working fluid (water, ethylene glycol, engine oil…) by developing a new class of fluids with a higher thermal conductivity for thermal systems. In the present work the effect of Al2O3 -water, as working fluid, on the efficiency of a flat plate solar collector is investigated experimentally. The mass flow rate of nanofluid is 250 l/h. The volume fraction of the nanoparticles is 0.2 %, 0.4 % and 0.8 % respectively. The results reveal the impact and importance of each of these parameters. Experimental results reveal that utilizing the nanofluid increases the collector efficiency in comparison to water as an absorbing medium.Öğe Effects of nanofluids on the efficiency of a flat plate solar collector(Fırat Üniversitesi, 2015) Budak Ziyadanoğulları, Neşe; Yıldız, Cengiz; Yücel, Halit Lutfi
