11 sonuçlar
Arama Sonuçları
Listeleniyor 1 - 10 / 11
Öğe The efficiency of Al2O3 water nanofluid on a flat plate solar collector(SETCOR publications, 2015) Budak Ziyadanoğulları, Neşe; Yıldız, Cengiz; Argunhan, Zeki; Tekalp, Selen; Yücel, Halit LutfiSolar collectors are particular kind of heat exchangers that transform solar radiation energy into internal energy of the transport medium. One of the most effective methods is replacing the working fluid (water, ethylene glycol, engine oil…) by developing a new class of fluids with a higher thermal conductivity for thermal systems. In the present work the effect of Al2O3-water, as working fluid, on the efficiency of a flat plate solar collector is investigated experimentally. The mass flow rate of nanofluid is 150 Lit/h. The volume fraction of the nanoparticles is 0.2 %, 0.4 % and 0.8 % respectively. The results reveal the impact and importance of each of these parameters. Experimental results reveal that utilizing the nanofluid increases the collector efficiency in comparison to water as an absorbing mediumÖğe Experimental investigation of solar stills integrated with solar water heating collectors(Türk Isı Bilimi ve Tekniği Derneği, 2017-10-31) Argunhan, Zeki; El, Emin; Yıldız, Cengiz; Çakmak, GülşahSolar still is a more practical way of obtaining clean water. In this study, we aimed to improve the efficiency of solar still systems and obtain distilled water at the same time. For this purpose, 5 different solar still systems were designed. Type 1; conventional solar still, Type 2; conventional solar still integrated with solar water heating collector and run via natural convection, Type 3; conventional solar still integrated with solar water heating collector and tubular heat exchanger and run via natural convection, Type 4; conventional solar still placed with plate heat exchanger and integrated with solar water heating collector and run via natural convection, Type 5; conventional solar still placed with plate heat exchanger and integrated with solar water heating collector and run via forced convection. In this study, the experiments were carried out on the parameters influencing the performance, the amount of distilled water obtained, and the efficiency of experiment settings designed in different types; and finally the results were presented. The amount of distilled water and efficiency of conventional solar still were 2389 ml and 51.47%, respectively. Maximum total amount of water and efficiency from natural convection systems were obtained from Type 4, and the values calculated were found as to be 5788 ml and 55.91%. Maximum amount of distilled water and the efficiency were obtained by utilizing forced convection system were found as to be 6068 ml and 58.99%, respectively.Öğe Konsantrik boru tip ısı değiştiricilerinde türbülatörlerin kanat delik geometrisinin ısı transferine ve basınç düşüşüne etkisi(Fırat Üniversitesi, 2011) Işık, Mehmet Zerrakki; Argunhan, Zeki; Yıldız, CengizThe effect of wing hole geometry of the vortex generator on heat transfer and pressure drop in concentric tube type heat exchangers has been investigated in this study.For experiments, two type of hole geometrywereselected.One has four rectengular hole with 2x7mm in dimension andthe other four circular hole with 5mm in diameter andapplied for 55-65-75-90 degree blade angles. Turbulator diameter is 60 mm and includes 6 blades. Air was used as hot stream, whereas water as cold stream. Experimental results were scrutinized.Heat transfer and pressure drop werefound high with usage of circular holes geometry.Öğe Dairesel kesitli bir borunun girişine yerleştirilen delikli sabit kanatçıklı dönme üreticinin ısı geçişi ve basınç düşüşüne etkileri(Pamukkale Üniversitesi, 2006-02-01) Argunhan, Zeki; Yıldız, CengizBu çalışmada iç içe borulu ısı değiştirgecinde farklı delik sayılı dönme üreticilerin ısı transferine ve basınç düşüşüne etkisi deneysel olarak araştırılmıştır. Bu amaçla değiştirgecin 60 mm çapındaki iç borunun girişine 55º kanat açısına sahip ve kanatlarında birer, ikişer, üçer ve dörder adet dairesel delikler bulunan dönme üreticiler yerleştirilerek deneyler yapılmıştır. Bunlar iç borunun girişine rahat takılıp sökülebilecek şekilde dizayn edilmişlerdir. İç borunun içinden sıcak akışkan olarak hava, iç borunun dışından ise soğuk akışkan olarak su geçmektedir.Öğe The experimental study of nanofluids on a flat-plate solar collector(Fırat Üniversitesi, 2017) Budak Ziyadanoğulları, Neşe; Yücel, Halit Lutfi; Yıldız, Cengiz; Işık, Mehmet KemalSolar collectors are particular kind of heat exchangers that transform solar radiation energy into internal energy of the transport medium. One of the most effective methods is replacing the working fluid (water, ethylene glycol, engine oil…) by developing a new class of fluids with a higher thermal conductivity for thermal systems. In the present work the effect of Al2O3 -water, as working fluid, on the efficiency of a flat plate solar collector is investigated experimentally. The mass flow rate of nanofluid is 250 l/h. The volume fraction of the nanoparticles is 0.2 %, 0.4 % and 0.8 % respectively. The results reveal the impact and importance of each of these parameters. Experimental results reveal that utilizing the nanofluid increases the collector efficiency in comparison to water as an absorbing medium.Öğe Second Law analysis in concentric heat exchangers with vortex flow generators(Energy Education Science and Technology, 2011) Argunhan, Zeki; Çakmak, Gülşah; Yıldız, Cengiz; Behçet, RasimIn the present study, the experimental results of heat transfer of a concentric tube heat exchanger were analyzed with respect to Second Law of Thermodynamics to reach the geometric optimal design of the heat exchangers. In order to increase the heat transfer, the vortex generators were placed in the entrance of the inner pipe of the heat exchanger. These vortex generators are 60 mm in diameter having six angled (55°, 65°, 75°, 90°) winglets. The winglets have one rectangular slot in each and are 2×7 mm in dimensions. Experiments were carried out with different Reynolds Numbers. Air as hot fluid and water as cold fluid were passed through the inner pipe and outer pipe of the concentric tube heat exchanger, respectively. The variations of the efficiency and Entropy Generation Number with respect to Reynolds Number are shown in graphics, and the results were discussed.Öğe Güneş enerjili havuz tipi damıtıcının ısıl analizi(Batman Üniversitesi, 2012-06-01) El, Emin; Çakmak, Gülşah; Argunhan, Zeki; Yücel, H. Lütfi; Yıldız, CengizSuyun kullanım amacına yönelik olarak istenilen kaliteye getirilmesi için arıtılması işlemi su yönetimi açısından önemli alanlardan biridir. Bu çalışmada, bu amaç için güneş enerjili damıtma sistemleri ve bu sistemleri oluşturan bileşenler incelenip güneş enerjili havuz tipi bir damıtıcının ısıl analizi yapılmıştır. Örnek bir model üzerinde sayısal benzetim yapılmış ve elde edilen teorik sonuçlar yorumlanmıştır. Böylece kurulması planlanan sistemin daha verimli olması için gerekli tasarım şartları ortaya konmuştur.Öğe Effect of swirl generators with different sized propeller on heat transfer enhancement(Energy Education Science and Technology, 2011) Argunhan, Zeki; Yıldız, Cengiz; Çakmak, GülşahIn this study, the swirl flow that is one of the passive methods is used for increasing the heat transfer coefficient in the concentric heat exchangers. For this purpose, propeller type swirl generators were prepared to test in the experiments. So, the effect of propellers placed in the inner pipe of the concentric heat exchangers on the heat transfer and pressure drop was investigated experimentally. Experiments were undertaken for the Reynolds Number range of 4000-12000 and for both parallel and counter-flow. It is shown that, the propellers rotated freely with the effect of fluid flowed in the inner pipe are swirling flow generator and they have improved heat transfer. In addition that up to 50% enhancements could be accomplished in heat transfer rates with the swirl generators compared to without the swirl generators. In the parallel flow mode, the enhancement was 10% lower than that of counter-flow at the same Reynolds number. On the other hand the pressure losses increase approximately 3 times more than the empty tube related to Reynolds numbers and propeller sizes. As an outcome of the study, the results showed that a rather smaller size but the same capacity heat exchanger could be proposed by using these elements imposing swirling to the fluid flowing through inner pipe.Öğe Effect of the air flow rate of blower on the performance of solar still(Türk Isı Bilimi ve Tekniği Derneği, 2015-06-01) Argunhan, Zeki; El, Emin; Yücel, Halit Lutfi; Çakmak, Gülşah; Yıldız, CengizSolar distillation is one of the important methods for water purification. This paper examines the performance of solar distillation system at different air flow rate. To increase the performance of distiller, artificial wind was created by fan and suitable wind speed was investigated to increase the amount of water distilled. The experiments were carried out in Elazığ climate conditions. In order to examine the effect of the wind speed on solar distillation system, two stills were manufactured with the size of 1000x1000 mm. One of them was the conventional still which was used as a reference. The other still was used to investigate experimentally the effect of the wind speed. Graphs were drawn for time-dependent changes in the amount of water distilled. It was found that that the productivity of the fan-still distiller was 14.7 % greater than that of a conventional still.Öğe Effects of nanofluids on the efficiency of a flat plate solar collector(Fırat Üniversitesi, 2015) Budak Ziyadanoğulları, Neşe; Yıldız, Cengiz; Yücel, Halit Lutfi
