2 sonuçlar
Arama Sonuçları
Listeleniyor 1 - 2 / 2
Öğe The effect of n-butanol additive on low load combustion, performance and emissions of biodiesel-diesel blend in a heavy duty diesel power generator(Elsevier, 2017-04) Işık, Mehmet Zerrakki; Bayındır, Hasan; İşcan, Bahattin; Aydın, HüseyinDiesel power generators are often used under partially load conditions. Especially, under low load conditions, it is crucial to find a solution for their considerably high brake specific fuel consumption (bsfc) and exhaust output emissions. Other points are the usability of waste cooking oil and an oxygenated alternative fuel in low load conditions of diesel generator. In this point of view, 10% n-butanol and 10% biodiesel mixture was blended with 80% of ultra low sulfur diesel fuel named here as BB20 was used and comparisons have been made with 20% biodiesel/80% diesel fuel named here as B20 and ultra low sulfur diesel fuel named here as (D2). Previously, main important physical and chemical fuel properties of test fuel have been found. These fuels were tested in low load operations of a diesel engine generator in order to find out the effects of blend fuels on combustion characteristics, performance and emissions of the test engine. The test results are presented in this paper and seem to raise quite interesting points. Butanol addition to diesel and biodiesel blends can be considered as a good solution for reducing density, viscosity and thus sustainable usability of biodiesel and increase thermal efficiency and lower carbon monoxide (CO) and oxides of nitrogen (NOx) under comparatively lower load conditions in diesel power generator engines.Öğe The effect of overlap length adhesive with bonded in Z type materials(Academic Journals, 2011-09-11) İşcan, Bahattin; Adin, Hamit; Aydın, TurgutThe usage of adhesives as connecting method is increasing rapidly in today world. Many of research, development and engineering have been made to find the most important parameters of adhesion. In this study, stress analysis of bonded Z type that connected with various adhesives has been investigated. The adhesive thickness and overlap non-angle was constant but overlap length and overlap angle were varied. This paper has deal with the effect of overlap length on predicting of failure load of adhesive. An effective method for numerical solution in finite element method (FEM) has been performed in analysis. The FEM code employed was ANSYS(10.0). Experimental results were compared with numerical results and were found quite reasonable.