2 sonuçlar
Arama Sonuçları
Listeleniyor 1 - 2 / 2
Öğe Düzlemsel güneş kollektörlerinde TiO2 - su nanoakışkanı kullanılarak ısıl verimin etkisinin deneysel olarak incelenmesi(Batman Üniversitesi Fen Bilimleri Enstitüsü, 2019-07-17) Işık, Mehmet Kemal; Ziyadanoğulları Budak, NeşeIn this thesis, the effect of nanofluids on the thermal efficiency of flat plate solar collectors was investigated by using TiO2 - water nanofluids in flat plate solar collectors. In this study, two different systems were installed, one was used as heat transfer fluid and the other was used as heat transfer fluid Ti O2 - water nanofluids. Nanofluids used in different volumetric concentration and water used as heat transfer fluid in different flow rates were compared with the results obtained in concurrent experiments, and the effects of the use of nanofluid on the thermal efficiency of the flat plate solar collectors together with the effects of the net collector surface area on the thermal efficiency were investigated. When the results of the experiment were compared, it was found that the thermal efficiency obtained in the system using nanofluid was higher than the water used system. In addition, the thermal efficiency of flat plate solar collectors in thermal efficiency when the collector surface area is reduced.When the test results were considered, a yield of 61%, 56%, 51% increase in water yield was obtained for volumetric ratios of 0.2%, 0.4% and 0.8% respectively for TiO2 - water according to all flow rates.Öğe Düzlemsel güneş kollektörlerinde seryum oksit – su ve çinko oksit-su nanoakışkanları kullanımının ısıl verime etkisinin deneysel ve sayısal olarak incelenmesi(Batman Üniversitesi Lisansüstü Eğitim Enstitüsü, 2024-12-16) Perçin, Süleyman; Budak Ziyadanoğulları, NeşeBu çalışmada düzlemsel güneş kollektörlerinde %0.01, %0.1, %1 konsantrasyonlarda Seryum oksit (CeO2), Çinko Oksit-Su (ZnO) nanoakışkanları ile suyun kullanıldığı sistemin farklı debilerde (250 lt/h, 150 lt/h, 50 lt/h) ve farklı saatlerde (07:30-17:30) verim, sıcaklık-ışınım-saat, ekserji kaybı gibi paremetreler açısından deneysel ve sayısal olarak mukayesesi yapılmıştır. Deneysel çalışmada elde edilen sonuçlara ilave olarak, hesaplamalı akışkanlar dinamiği (HAD) ile sayısal olarak analiz çalışmaları yapılmış ve deneysel olarak elde edilen verilerle karşılaştırma yapılmıştır. Deneysel çalışma ile HAD ile edilen bulguların sayısal analiz sonuçlarının birbirileriyle uyumlu olduğu görülmüştür. Yapılan deneylerden elde edilen sonuçlara göre suya kıyasla verimdeki en fazla artış %1 ZnO-su nanoakışkanında, 250 lt/h debide gerçekleşmiş olup; bu artış %28’dir. Suya kıyasla verimdeki en az artış ise 50 lt/h debide %0.01 CeO2-su nanokışkanında gerçekleşmiş olup; bu artış %8’dir. En yüksek entropi üretimi 50 lt/h debide su için 6.72 W/K olurken, en düşük entropi üretimi %1 ZnO nanoakışkanı için 250 lt/h debide 5.57 W/K olmuştur. En yüksek ekserji yıkımı 50 lt/h debide su için 1235 W olurken, en düşük ekserji yıkımı 250 lt/h debide %1 ZnO nanoakışkanı için 1005 W olmuştur.