3 sonuçlar
Arama Sonuçları
Listeleniyor 1 - 3 / 3
Öğe Analysis of ethanol RCCI application with safflower biodiesel blends in a high load diesel power generator(Elsevier, 2016-11-15) Işık, Mehmet Zerrakki; Aydın, HüseyinThe effects of RCCI in a diesel power generator by using safflower oil biodiesel-diesel blends were experimentally investigated. Ethanol was premixed as PFI by rates of 30% and 50% of total mass fuel consumption of the engine. Tests were conducted at constant engine speed of 1500 rpm and fixed load 10.8 kW engine power. The purpose of blending biodiesel with diesel is to increase the fuel reactivity of primary fuel in order to easily initiate the combustion. Therefore, test fuels were prepared by blending 10% of the biodiesel with 90% of diesel, 20% of the biodiesel with 80% of diesel and 50% of the biodiesel with 50% of diesel. The most important combustion, performance and emission indicators of the engine under various conditions have been deeply investigated and results have been presented. The ethanol RCCI operation increased peak pressure values especially with using of B50 as high reactivity fuel while combustion was retarded for both RCCI modes. Overall, many indicators of the combustion was improved. Performance parameters were developed. Especially, bsfc was considerably increased. NOx, emissions were considerably decreased while CO and HC emissions were a bit increased.Öğe Effect of ethanol blending with biodiesel on engine performance and exhaust emissions in a CI engine(Elsevier, 2010-02-02) Aydın, Hüseyin; İlkılıç, CumaliThe use of biodiesel as an alternative diesel engine fuel is increasing rapidly. However, due to technical deficiencies, they are rarely used purely or with high percentages in unmodified diesel engines. Therefore, in this study, we used ethanol as an additive to research the possible use of higher percentages of biodiesel in an unmodified diesel engine. Commercial diesel fuel, 20% biodiesel and 80% diesel fuel, called here as B20, and 80% biodiesel and 20% ethanol, called here as BE20, were used in a single cylinder, four strokes direct injection diesel engine. The effect of test fuels on engine torque, power, brake specific fuel consumption, brake thermal efficiency, exhaust gas temperature, and CO, CO2, NOx and SO2 emissions was investigated. The experimental results showed that the performance of CI engine was improved with the use of the BE20 especially in comparison to B20. Besides, the exhaust emissions for BE20 were fairly reduced.Öğe The effects of λ and ε on engine performance and exhaust emissions using ethanol-unleaded gasoline blends in an SI engine(Taylor & Francis, 2011-01) Bayındır, Hasan; Yücesu, Hüseyin Serdar; Aydın, HüseyinIn this study, the effect of relative air-fuel ratio (λ) and compression ratio (ε) on engine performance and exhaust emissions was experimentally investigated. The experiments were performed by varying ethanol-unleaded gasoline blends as E0 (100% unleaded gasoline), E10 (10% ethanol and 90% gasoline blend), E30 (30% ethanol and 70% gasoline blend), and E85 (85% ethanol and 15% gasoline blend). In experiments, first the effects of ethanol-unleaded gasoline blends on engine performance and exhaust emissions at 0.931, 1, and 1.069 λ values were clarified. Second, tests were carried out with compression ratios of 7:1, 9:1, and 11:1. The results indicated that the relative air-fuel ratio and ethanol content play an important role in reducing CO (carbon monoxide emissions) and HC (hydrocarbon) emissions. Results also showed that the engine power was slightly decreased, especially at higher engine speeds. A probable knocking phenomenon did not occur with the increase of compression ratio because of a higher octane number of ethanol-unleaded gasoline blends.
