Investigation of optimum friction welding parameters and energy consumption for Ramor 500 and AISI 420 steels
Küçük Resim Yok
Tarih
2022-07-02
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Batman Üniversitesi
Erişim Hakkı
info:eu-repo/semantics/openAccess
Özet
Ramor steels are widely used materials in the defence and automotive industries due to their superior strength to high-speed impacts. However, many problems are encountered during the use of traditional fusion welds, which are applied to join these steel types with dissimilar metal materials. Therefore, in recent years, friction welding known as solid state welding method has attracted attention instead of traditional melting welding. In this experimental study, the effects of different welding parameters applied during friction welding of Ramor 500 and AISI 420 rod materials on the tensile strength of the joints were examined and the most suitable welding parameters were investigated. In addition, the optimum power requirement for energy saving has been examined. It was found that the lowest tensile strength was 575 MPa for 5 seconds friction time and 45 MPa friction pressure parameters, while the highest tensile strength was 633 MPa for 7 seconds friction time and 55 MPa friction pressure parameters. It was observed that the lowest consumed power was 1.44 kW at 5 seconds friction time and 45 MPa friction pressure, while the highest consumed power was 2.45 kW at 9 seconds friction time and 55 MPa friction pressure. Thanks to the obtained data, the optimum power requirement was determined and 10% energy saving was achieved.
Açıklama
Anahtar Kelimeler
Energy Saving, Friction Welding, Power Consumption, Ramor 500, AISI 420
Kaynak
WoS Q Değeri
Scopus Q Değeri
Cilt
Sayı
Künye
Adin, M. Ş. (2022). Investigation of optimum friction welding parameters and energy consumption for Ramor 500 and AISI 420 steels. Batman Energy Summit, 30 June-02 July 2022, Batman, Turkey.
