Investigation of optimum friction welding parameters and energy consumption for Ramor 500 and AISI 420 steels

Basit Öğe Kaydı
dc.authorid0000-0003-2455-967Xen_US
dc.contributor.authorAdin, Mehmet Şükrü
dc.date.accessioned2023-03-08T06:28:58Z
dc.date.available2023-03-08T06:28:58Z
dc.date.issued2022-07-02en_US
dc.departmentBatman Üniversitesi Beşiri Organize Sanayi Bölgesi Meslek Yüksekokulu Tekstil, Giyim, Ayakkabı ve Deri Bölümüen_US
dc.description.abstractRamor steels are widely used materials in the defence and automotive industries due to their superior strength to high-speed impacts. However, many problems are encountered during the use of traditional fusion welds, which are applied to join these steel types with dissimilar metal materials. Therefore, in recent years, friction welding known as solid state welding method has attracted attention instead of traditional melting welding. In this experimental study, the effects of different welding parameters applied during friction welding of Ramor 500 and AISI 420 rod materials on the tensile strength of the joints were examined and the most suitable welding parameters were investigated. In addition, the optimum power requirement for energy saving has been examined. It was found that the lowest tensile strength was 575 MPa for 5 seconds friction time and 45 MPa friction pressure parameters, while the highest tensile strength was 633 MPa for 7 seconds friction time and 55 MPa friction pressure parameters. It was observed that the lowest consumed power was 1.44 kW at 5 seconds friction time and 45 MPa friction pressure, while the highest consumed power was 2.45 kW at 9 seconds friction time and 55 MPa friction pressure. Thanks to the obtained data, the optimum power requirement was determined and 10% energy saving was achieved.en_US
dc.identifier.citationAdin, M. Ş. (2022). Investigation of optimum friction welding parameters and energy consumption for Ramor 500 and AISI 420 steels. Batman Energy Summit, 30 June-02 July 2022, Batman, Turkey.en_US
dc.identifier.urihttps://hdl.handle.net/20.500.12402/4415
dc.language.isoenen_US
dc.publisherBatman Üniversitesien_US
dc.relation.journalBatman Energy Summit, 30 June-02 July 2022en_US
dc.relation.publicationcategoryKonferans Öğesi - Ulusal - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectEnergy Savingen_US
dc.subjectFriction Weldingen_US
dc.subjectPower Consumptionen_US
dc.subjectRamor 500en_US
dc.subjectAISI 420en_US
dc.titleInvestigation of optimum friction welding parameters and energy consumption for Ramor 500 and AISI 420 steelsen_US
dc.typeConference Objecten_US

Dosyalar

Lisans paketi
Listeleniyor 1 - 1 / 1
Küçük Resim Yok
İsim:
license.txt
Boyut:
1.44 KB
Biçim:
Item-specific license agreed upon to submission
Açıklama:
İndir

Koleksiyon

Batman Üniversitesi, Beşiri Organize Sanayi Bölgesi Meslek Yüksekokulu, Tekstil, Giyim, Ayakkabı ve Deri Bölümü, Bildiri Metinleri Koleksiyonu