Strength and failure analysis of inverse Z joints bonded with Vinylester Atlac 580 and Flexo Tix adhesives

Basit Öğe Kaydı
dc.authorid0000-0003-2455-967Xen_US
dc.authorid0000-0003-4505-3395en_US
dc.contributor.authorAdin, Hamit
dc.contributor.authorTurgut, Aydın
dc.date.accessioned2019-06-21T06:40:48Z
dc.date.available2019-06-21T06:40:48Z
dc.date.issued2012-11en_US
dc.departmentBatman Üniversitesi Mühendislik - Mimarlık Fakültesi Makine Mühendisliği Bölümüen_US
dc.description.abstractIn this study, the tensile strength and failure loads of the inverse Z joints were analyzed both experimentally and numerically by using two adhesives with different properties under a tensile load. Vinylester Atlac 580 and Flexo Tix were used as adhesives and the joints were prepared with two different composite materials. Initially, the mechanical properties of the adhesives were specified using bulk specimens. Then, the stress analyses were performed using three-dimensional finite element method (3-D FEM) via Ansys (V.10.0.1). The experimental results were compared with the numerical results and they were found quite reasonable. According to the test results, it can be seen that when the adherend thickness is increased, the stress increases as well. The most appropriate value of the adherend thickness is identified as t = 5 mm. Furthermore, it was observed that the lowest failure load was obtained at t = 3 mm the thickness for each specimen.en_US
dc.identifier.citationAdin, H., Turgut, A. (2012). Strength and failure analysis of inverse Z joints bonded with Vinylester Atlac 580 and Flexo Tix adhesives. Journal of Mechanical Science and Technology, 26(11), pp. 3453-3461. https://doi.org/10.1007/s12206-012-0873-xen_US
dc.identifier.endpage3461en_US
dc.identifier.issn1738-494X
dc.identifier.issn1976-3824
dc.identifier.issue11en_US
dc.identifier.scopusqualityQ2en_US
dc.identifier.startpage3453en_US
dc.identifier.urihttps://doi.org/10.1007/s12206-012-0873-x
dc.identifier.urihttps://hdl.handle.net/20.500.12402/2077
dc.identifier.volume26en_US
dc.identifier.wosqualityQ3en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherSpringeren_US
dc.relation.isversionof10.1007/s12206-012-0873-xen_US
dc.relation.journalJournal of Mechanical Science and Technologyen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.rightsAttribution-NonCommercial-ShareAlike 3.0 United States*
dc.rights.urihttp://creativecommons.org/licenses/by-nc-sa/3.0/us/*
dc.subjectAdhesiveen_US
dc.subjectComposite Materialen_US
dc.subjectStress Analysisen_US
dc.subjectAnsysen_US
dc.subjectFinite Element Method (FEM)en_US
dc.titleStrength and failure analysis of inverse Z joints bonded with Vinylester Atlac 580 and Flexo Tix adhesivesen_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim Yok
İsim:
Strength-and-failure-analysis-of-inverse-Z-joints-bonded-with-Vinylester-Atlac-580-and-Flexo-Tix-adhesivesJournal-of-Mechanical-Science-and-Technology.pdf
Boyut:
433.1 KB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin / Full Text
İndir
Lisans paketi
Listeleniyor 1 - 1 / 1
Küçük Resim Yok
İsim:
license.txt
Boyut:
1.44 KB
Biçim:
Item-specific license agreed upon to submission
Açıklama:
İndir

Koleksiyon

Mühendislik-Mimarlık Fakültesi Makine Mühendisliği Bölümü Makale Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu
WoS İndeksli Yayınlar Koleksiyonu