Analysis of spheroidized AISI 1050 steel in terms of cutting forces and surface quality

Basit Öğe Kaydı
dc.authorid0000-0003-4208-8779en_US
dc.authorid0000-0001-8066-5384en_US
dc.authorid0000-0002-6211-8827en_US
dc.contributor.authorBaday, Şehmus
dc.contributor.authorBaşak, Hüdayim
dc.contributor.authorGüral, Ahmet
dc.date.accessioned2019-06-26T08:08:53Z
dc.date.available2019-06-26T08:08:53Z
dc.date.issued2016en_US
dc.departmentBatman Üniversitesi Teknoloji Fakültesi Makine ve İmalat Mühendisliği Bölümüen_US
dc.description.abstractIn this study, the effects of microstructure differences obtained with the application of different spheroidizing heat treatment cycles on medium carbon steel on cutting forces and surface roughness values were investigated. For this purpose, a group of AISI 1050 materials was annealed at 700°C below Ac1 temperature for 720 min and cementite phases were spheroidized by the traditional method. Another group of materials was quenched after austenitization at 850°C for 15 min and then cementites were spheroidized in the ferrite matrix by over-tempering separately at 600°C for 15 and 60 min and at 700°C for 60 min. Machining of the samples was tested under dry cutting conditions in CNC turning center with SNMG 120408 cementite carbide cutting tool and proper PSBNR 2525M12 tool holder with 75-degree edge angle. Cutting forces of traditionally spheroidized samples were lower than the samples spheroidized after quenching. In addition, their cutting forces decreased due to the increase in the average sizes of spheroidal cementite. Minimum surface roughness value was obtained from the samples which were spheroidized at 600°C for 15 min after quenching. However, surface roughness rate of the sample increased as spheroidizing time increased.en_US
dc.identifier.citationBaday, Ş, Başak, H., Güral, A. (2016). Analysis of spheroidized AISI 1050 steel in terms of cutting forces and surface quality. Metallic Materials, 54(5), 315-320. https://doi.org/10.4149/km_2016_5_315en_US
dc.identifier.endpage320en_US
dc.identifier.issn0023-432X
dc.identifier.issn1338-4252
dc.identifier.issue5en_US
dc.identifier.scopusqualityQ3en_US
dc.identifier.startpage315en_US
dc.identifier.urihttps://doi.org/10.4149/km_2016_5_315
dc.identifier.urihttps://hdl.handle.net/20.500.12402/2129
dc.identifier.volume54en_US
dc.identifier.wosqualityQ3en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherSlovenska Akademia Vieden_US
dc.relation.isversionof10.4149/km_2016_5_315en_US
dc.relation.journalKovove Materialyen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.rightsAttribution-NonCommercial-ShareAlike 3.0 United States*
dc.rights.urihttp://creativecommons.org/licenses/by-nc-sa/3.0/us/*
dc.subjectCutting Forcesen_US
dc.subjectMedium Carbon Steelen_US
dc.subjectSpheroidizingen_US
dc.subjectSurface Roughnessen_US
dc.titleAnalysis of spheroidized AISI 1050 steel in terms of cutting forces and surface qualityen_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim Yok
İsim:
km_2016_5_315.pdf
Boyut:
572.27 KB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin / Full Text
İndir
Lisans paketi
Listeleniyor 1 - 1 / 1
Küçük Resim Yok
İsim:
license.txt
Boyut:
1.44 KB
Biçim:
Item-specific license agreed upon to submission
Açıklama:
İndir

Koleksiyon

Teknoloji Fakültesi, Makine ve İmalat Mühendisliği Bölümü, Makale Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu
WoS İndeksli Yayınlar Koleksiyonu