2 sonuçlar
Arama Sonuçları
Listeleniyor 1 - 2 / 2
Öğe Analysis of combustion, performance and emission characteristics of a diesel engine using low sulfur tire fuel(Elsevier, 2015-03-01) Aydın, Hüseyin; İlkılıç, CumaliAn alternative fuel for diesel engines was produced from waste vehicle tires by the method of pyrolysis. In order to reduce sulfur content of produced the liquid fuels, during the reaction Ca(OH) 2 was used. Then, H 2 SO 4 were used after the reaction and the sulfur content of the product was reduced by 83.75%. The properties of diesel fuel, low sulfur tire fuel and fuel mixtures of low sulfur tire fuel and diesel fuel were found. Then the prepared fuel blends and diesel fuel were tested in a diesel engine. Performance, combustion and emission parameters of the engine when using each fuel were obtained and comparisons were made with D2 fuel. Power, torque and mean effective pressure, mass fuel consumption, effective efficiency and bscf values presented. Results justify that the performance of the engine slightly lowers by using blends of LSTF. Cylinder pressure and heat release rate values of the test fuels usage were quite similar with those of D2. CO, HC, and smoke emissions were slightly higher while NOx emissions were lower for LSTF blends. All of these results indicate that desulfurized tire fuels with low percentages can be used as alternative fuel in diesel engine.Öğe Fuel production from waste vehicle tires by catalytic pyrolysis and its application in a diesel engine(Journals & Books, 2011-05) Aydın, Hüseyin; İlkılıç, CumaliAn alternative fuel production was performed by pyrolysis of waste vehicle tires under nitrogen (N2) environment and with calcium hydroxide (Ca(OH)2) as catalyst. The sulfur content of liquids obtained were reduced by using Ca(OH)2. The liquid fuel of waste vehicle tires(TF) was then used in a diesel engine to blend with petroleum diesel fuel by 5%(TF5), 10%(TF10), 15%(TF15), 25%(TF25), 35%(TF35), 50%(TF50), and 75%(TF75) wt. and pure (TF100). Performance characteristics such as engine power, engine torque, brake specific fuel consumption (bsfc) and exhaust temperature and emission parameters such as oxides of nitrogen (NOx), carbon monoxides (CO), total unburned hydrocarbon (HC), sulfur dioxides (SO2) and smoke opacity of the engine operation with TF and blend fuels of TF–diesel were experimentally investigated and compared with those of petroleum diesel fuel. It was concluded that the blends of pyrolysis oil of waste tires TF5, TF10, TF25 and TF35 can efficiently be used in diesel engines without any engine modifications. However, the blends of TF50, TF75 and TF100 resulted considerably to high CO, HC, SO2 and smoke emissions.
