35 sonuçlar
Arama Sonuçları
Listeleniyor 1 - 10 / 35
Öğe Otomotiv fren balatalarının sürtünme performansında sic etkisi(Uludağ Üniversitesi, 2012-06) Altun, Şehmus; Öner, Cengiz; Sugözü, İlkerBu çalışmada, yüksek mukavemet, düşük aşınma, daha fazla yük ve sıcaklık dayanımı özelliklerine sahip SiC içeren balata numunelerinin sürtünme katsayısı ve aşınma dayanımına etkisi incelenmiştir. Balata bileşeni içerisine %5, %10 ve %15 SiC ilave edilmiştir. Sonuç olarak, SiC oranı arttıkça aşınma direnci artmış ve sürtünme katsayısı azalmıştırÖğe Atık kızartma yağlarının alternatif dizel motor yakıtı olarak değerlendirilmesi(TMMOB Makina Mühendisleri Odası, 2011) Adin, Hamit; Yaşar, Fevzi; Altun, ŞehmusÖğe Performance and exhaust emissions of a DI diesel engine fueled with waste cooking oil and inedible animal tallow methyl esters(TÜBİTAK, 2011) Altun, ŞehmusThe performance and exhaust emissions of a direct injection diesel engine were experimentally investigated using 2 biodiesel fuels with promising economic perspective, one obtained from inedible animal tallow and the other from waste cooking oils. Inedible animal tallow, which is obtained from a mixture of slaughtered cattle and sheep fats collected from a local slaughterhouse during meat preparation process, was transesterified using methyl alcohol and an alkaline catalyst to produce the inedible animal tallow methyl ester. Biodiesel from waste cooking oil was produced from waste cooking oils and methyl alcohol via a transesterification reaction, and provided by a commercial biodiesel producer. In order to investigate the performance and exhaust emissions, the experiments were conducted at different engine speeds under the full load condition of the engine. The experimental results showed, compared with diesel fuel, that the biodiesel fuels resulted in a reduction in brake torque and in an increase in brake specific fuel consumption. Although both biodiesels caused reductions in carbon monoxide (CO), the NOx emissions were higher for waste cooking oil biodiesel and lower for inedible animal tallow biodiesel as compared to diesel fuel.Öğe Hayvansal iç yağlardan transesterifikasyon reaksiyonu ile biyodizel üretilmesi(Doğu Anadolu Bölgesi Araştırma ve Uygulama Merkezi, 2008-07-31) Altun, Şehmus; Öner, CengizHayvansal yağlar normal çevre sıcaklığında katı ve çok viskozdurlar. Yüksek viskozitelerinden dolayı dizel motorlarında kullanılmadan önce modifiye edilmeleri gerekmektedir. Hayvansal yağların dizel motorlarında kullanılabilirliliğini iyileştirmek için emülsiyon ve transesterifikasyon etkili iki yöntemdir. Bu çalışmada hayvansal iç yağlardan baz katalizörlü transesterifikasyon ile %99.7 saflıkta metil alkol ve katalizör olarak %98 saflıkta NaOH kullanılarak hayvansal iç yağı metil esteri (biyodizel) üretilmiştir. Hayvansal iç yağı, metil ester şekline dönüştükten sonra viskozitesi önemli ölçüde azalmış ve oda sıcaklığında sıvı fazında bir yakıt elde edilmiştir. Biyodizelin belirlenen yakıt özellikleri ASTM standartlarında olup, viskozitesi ve yoğunluğu dizel yakıtına yakın, ısıl değeri ise %8 daha düşük çıkmıştır.Öğe The fuel properties of methyl esters produced from canola oil- animal tallow blends by basecatalyzed transesterification(Kırıkkale Üniversitesi, 2010-06) Altun, Şehmus; Yaşar, Fevzi; Öner, CengizBiodiesel is an alternative diesel fuel that can be produced from renewable feedstocks such as vegetable oil or animal fats by transesterification with methanol for using in diesel engines. The viscosity and density of biodiesel fuels are important parameters due to being key fuel properties for injection and combustion process of diesel engines. These fuel properties mainly depend on the feedstock which is used in the biodiesel production. In this study, the blends containing 0, 25, 50, 75 and 100% of food-grade canola oil/inedible animal tallow in volume basis were prepared and converted into methyl esters by base-catalyzed transesterification. Effect of inedible animal tallow-canola oil blends on the viscosity and density of methyl esters were investigated. Experimental results showed that the kinematics viscosity of methyl esters increased as animal tallow ratio increased in the feedstock. Besides, it was observed that density did not change muchÖğe Onarımda kullanılan darbe dayanımlı iki bileşenli yapıştırıcılar(Fırat Üniversitesi, 2011) Adin, Hamit; Altun, Şehmus; Yaşar, FevziÖğe Batman şehir merkezinde hava kirliliği ve kontrolü(Batman Üniversitesi, 2017) Adin, Hamit; Yaşar, Fevzi; Altun, Şehmus; İşcan, BahattinBu çalışmada yapılan analizler, geçmiş yılların verileri ve en önemli atmosferik hava kirliliği bileşenlerinin ölçüm değerleri kullanılarak Batman şehir merkezindeki hava kirliliği kalite indekslerine göre araştırılmıştır. Batman şehir merkezide, hava kirliliği oluşturan temel bileşenlerden olan kükürtdioksit(SO2) ve partikül maddeler (PM) 2006-2011 yılları için incelenmiştir. Ölçülen değerler, Hava Kalitesi Kontrol Yönetmeliği (HKKY) ve Avrupa Birliğinin (AB) belirlediği sınır değerlere göre kıyaslanmıştır. Buna göre, Batman şehir merkezindeki hava kirliliği sınır değerleri HKKY değerlerinin altında kalmış fakat AB’nin belirlediği sınır değerlerin üstünde kalmıştır. Sonuç olarak, Batman şehir merkezinde düzenli hava kalitesi ölçümleri yapılmamakta olup, yerel bir çevre komitesinin oluşturulması, hava kirliliğinin önlenmesinde gerekli tedbirlerin alınması gerekmektedir. Alınması gereken tedbirler ayrıca sıralanmıştır.Öğe A comparison of performance and emissions of a diesel power generator fueled with biodiesels from waste frying oils(The International University of Sarajevo, 2013) Altun, Şehmus; Yaşar, FevziÖğe Exhaust emissions of methanol and ethanol-unleaded gasoline blends in a spark ignition engine(VINCA Institute of Nuclear Sciences, 2013) Altun, Şehmus; Öztop, Hakan Fehmi; Öner, Cengiz; Varol, YasinIn this study, the effect of unleaded gasoline and unleaded gasoline blended with 5% and 10% of ethanol or methanol on the performance and exhaust emissions of a spark-ignition engine were experimentally investigated. The engine tests were performed by varying the engine speed between 1000 and 4000 rpm with 500 rpm period at three-fourth throttle opening position. The results showed that brake specific fuel consumption increased while brake thermal efficiency, emissions of carbon monoxide and hydrocarbon decreased with methanol-unleaded gasoline and ethanol-unleaded gasoline blends. It was found that a 10% blend of ethanol or methanol with unleaded gasoline works well in the existing design of engine and parameters at which engines are operating.Öğe Exhaust emissions from a spark-ıgnition engine operating on Iso-propanol and unleaded gasoline blends(Technology, 2010) Altun, Şehmus; Öner, Cengiz; Fırat, MüjdatIn this study, the effect of blends of iso-propanol and unleaded gasoline on exhaust emissions of a sparkignition engine were experimentally investigated. Exhaust emission tests were conducted on a four-stroke, four cylinder and direct injection spark-ignition engine. The engine tests were performed at three-fourth throttle opening position at four various speeds in the range of 1000-4000 rpm with 1000 rpm period. The experimental results compared with unleaded gasoline showed that emissions of carbon monoxide (CO) and hydrocarbon (HC) decreased with iso-propanol-unleaded gasoline blends while carbon dioxide (CO2) emission increased.