2 sonuçlar
Arama Sonuçları
Listeleniyor 1 - 2 / 2
Öğe Wet chemical methods for producing mixing crystalline phase ZrO 2 thin film(Elsevier, 2016-07) Pakma, Osman; Özdemir, Cengiz; Kariper, İshak Afşin; Özaydın, Cihat; Güllü, ÖmerThe aim of the study is to develop a more economical and easier method for obtaining ZrO 2 thin films at lower temperature, unlike the ones mentioned in the literature. For this purpose, wet chemical synthesis methods have been tested and XRD, UV-VIS and SEM analysis of ZrO 2 thin films have been performed. At the end of the analysis, we identified the best method and it has been found that the features of the films produced with this method were better than the films produced by using different reagents, as well as the films reported in the literature. Especially it has been observed that the transmittance of the film produced with this method were higher and better than the films in the literature and the others. In addition, refractive index of the film produced with this method was observed to be lower. Moreover, by using the same method Al/ZrO 2 /p-Si structure has been obtained and it has been compared with Al/p-Si reference structure in terms of electrical parameters.Öğe Characterization of an Au/n-Si photovoltaic structure with an organic thin film(Elsevier, 2013-08) Özaydın, Cihat; Akkılıç, Kemal; İlhan, Salih; Rüzgar, Şerif; Güllü, Ömer; Temel, HamdiWe demonstrate that a copper(II) organic complex can control the electrical characteristics of conventional Au/n-Si metal-semiconductor (MS) contacts. We investigated the electronic and photovoltaic properties of a Cu(II) complex/n-Si heterojunction diode. The ideality factor n and barrier height Φb of the diode were 2.22 and 0.736 eV, respectively. An ideality factor greater than unity indicates that the diode exhibits non-ideal current-voltage behavior. This behavior results from the effect of series resistance and the presence of an interfacial layer. The series resistance and barrier height determined using Norde's method were 6.7 kΩ and 0.77 eV, respectively. The device showed photovoltaic behavior, with a maximum open-circuit voltage of 0.24 V and a short circuit current of 1.7 μA under light of 8 mW/cm2.
