Arama Sonuçları
Listeleniyor 1 - 10 / 31
Öğe Biodiesel production from inedible animal tallow and an experimental investigation of its use as alternative fuel in a direct injection diesel engine(Elsevier, 2009-02-15) Altun, Şehmus; Öner, CengizIn this study, a substitute fuel for diesel engines was produced from inedible animal tallow and its usability was investigated as pure biodiesel and its blends with petroleum diesel fuel in a diesel engine. Tallow methyl ester as biodiesel fuel was prepared by base-catalyzed transesterification of the fat with methanol in the presence of NaOH as catalyst. Fuel properties of methyl ester, diesel fuel and blends of them (5%, 20% and 50% by volume) were determined. Viscosity and density of fatty acid methyl ester have been found to meet ASTM D6751 and EN 14214 specifications. Viscosity and density of tallow methyl esters are found to be very close to that of diesel. The calorific value of biodiesel is found to be slightly lower than that of diesel. An experimental study was carried out in order to investigate of its usability as alternative fuel of tallow methyl ester in a direct injection diesel engine. It was observed that the addition of biodiesel to the diesel fuel decreases the effective efficiency of engine and increases the specific fuel consumption. This is due to the lower heating value of biodiesel compared to diesel fuel. However, the effective engine power was comparable by biodiesel compared with diesel fuel. Emissions of carbon monoxide (CO), oxides of nitrogen (NOx), sulphur dioxide (SO2) and smoke opacity were reduced around 15%, 38.5%, 72.7% and 56.8%, respectively, in case of tallow methyl esters (B100) compared to diesel fuel. Besides, the lowest CO, NOx emissions and the highest exhaust temperature were obtained for B20 among all other fuels. The reductions in exhaust emissions made tallow methyl esters and its blends, especially B20 a suitable alternative fuel for diesel and thus could help in controlling air pollution. Based on this study, animal tallow methyl esters and its blends with petroleum diesel fuel can be used a substitute for diesel in direct injection diesel engines without any engine modification.Öğe The comparison of engine performance and exhaust emission characteristics of sesame oil-diesel fuel mixture with diesel fuel in a direct injection diesel engine(Elsevier, 2008-01-09) Altun, Şehmus; Bulut, Hüsamettin; Öner, CengizThe use of vegetable oils as a fuel in diesel engines causes some problems due to their high viscosity compared with conventional diesel fuel. Various techniques and methods are used to solve the problems resulting from high viscosity. One of these techniques is fuel blending. In this study, a blend of 50% sesame oil and 50% diesel fuel was used as an alternative fuel in a direct injection diesel engine. Engine performance and exhaust emissions were investigated and compared with the ordinary diesel fuel in a diesel engine. The experimental results show that the engine power and torque of the mixture of sesame oil-diesel fuel are close to the values obtained from diesel fuel and the amounts of exhaust emissions are lower than those of diesel fuel. Hence, it is seen that blend of sesame oil and diesel fuel can be used as an alternative fuel successfully in a diesel engine without any modification and also it is an environmental friendly fuel in terms of emission parameters.Öğe Performance and exhaust emissions of a DI diesel engine fueled with waste cooking oil and inedible animal tallow methyl esters(TÜBİTAK, 2011) Altun, ŞehmusThe performance and exhaust emissions of a direct injection diesel engine were experimentally investigated using 2 biodiesel fuels with promising economic perspective, one obtained from inedible animal tallow and the other from waste cooking oils. Inedible animal tallow, which is obtained from a mixture of slaughtered cattle and sheep fats collected from a local slaughterhouse during meat preparation process, was transesterified using methyl alcohol and an alkaline catalyst to produce the inedible animal tallow methyl ester. Biodiesel from waste cooking oil was produced from waste cooking oils and methyl alcohol via a transesterification reaction, and provided by a commercial biodiesel producer. In order to investigate the performance and exhaust emissions, the experiments were conducted at different engine speeds under the full load condition of the engine. The experimental results showed, compared with diesel fuel, that the biodiesel fuels resulted in a reduction in brake torque and in an increase in brake specific fuel consumption. Although both biodiesels caused reductions in carbon monoxide (CO), the NOx emissions were higher for waste cooking oil biodiesel and lower for inedible animal tallow biodiesel as compared to diesel fuel.Öğe Biodiesel properties of microalgae (Chlorella protothecoides) oil for use in diesel engines(Taylor & Francis, 2018-09-08) Yaşar, Fevzi; Altun, ŞehmusIn this study, biodiesel was produced from a microalgae oil, chlorella protothecoides, by typical alkali-catalyzed transesterification in conditions such as a 0.75 wt.% KOH of the oil as catalyst, 68°C and 80 min which was agreed as optimal conditions after investigating the effect of KOH concentration, reaction temperature and time at constant molar ratio of 6:1 on the conversion rate and fuel properties. Under these conditions, a 98.6% conversion rate of algae oil to its methyl ester was achieved with ester content higher than 96%. Furthermore, all physicochemical properties met the requirements of international biodiesel standards, EN 14214 and ASTM D 6751, with some remarkable ones such as high cetane number (57.3) and low CFPP (−10°C). The effect of microalgae biodiesel volume fraction in the fuel on the kinematic viscosity, CFPP, lubricity, density, and distillation temperature was also studied. A blending ratio of the algal-biodiesel up to 50% (v/v) was also found in agreement with the standards for biodiesel-diesel blends. From GC analysis, oleic and linoleic acids were found to be major fatty acids, and then the oxygen extended sooting index and adiabatic flame temperature were calculated using fatty acid distribution for evaluating the main diesel emissions such as soot and NO. As a result, the algae oil studied here was found to be an appropriate raw material for producing biodiesel and for using in Diesel Engines and its properties are within the typical ranges of conventional biodiesel fuels.Öğe Exhaust emissions of methanol and ethanol-unleaded gasoline blends in a spark ignition engine(VINCA Institute of Nuclear Sciences, 2013) Altun, Şehmus; Öztop, Hakan Fehmi; Öner, Cengiz; Varol, YasinIn this study, the effect of unleaded gasoline and unleaded gasoline blended with 5% and 10% of ethanol or methanol on the performance and exhaust emissions of a spark-ignition engine were experimentally investigated. The engine tests were performed by varying the engine speed between 1000 and 4000 rpm with 500 rpm period at three-fourth throttle opening position. The results showed that brake specific fuel consumption increased while brake thermal efficiency, emissions of carbon monoxide and hydrocarbon decreased with methanol-unleaded gasoline and ethanol-unleaded gasoline blends. It was found that a 10% blend of ethanol or methanol with unleaded gasoline works well in the existing design of engine and parameters at which engines are operating.Öğe Biodiesel production from raw cottonseed oil and its characterization(Energy Education Science and Technolgy Part A, 2011-07) Altun, Şehmus; Yaşar, Fevzi; Öner, CengizIn this study, raw cottonseed oil of Turkish origin was transesterified using methyl alcohol and an alkali catalyst to obtain the cottonseed oil methyl ester. The obtained cottonseed oil methyl ester was analyzed by gas chromatography (GC) for determining the fatty acid composition. The fuel-related properties of cottonseed oil methyl ester, cold filter plugging point, cloud point, kinematic viscosity, density, cetane index, flash point, distillation, sulfur content and heating value were determined and compared with those of petroleum diesel fuel and international biodiesel standards. From gas chromatograph analysis, it was found that the cottonseed oil methyl ester has the more amount of total unsaturated FA, therefore, it showed better cold-flow properties than more saturated ones, as expected. Moreover, the fuel-related properties of cottonseed oil methyl ester were within the specified standardsÖğe Fuel properties of biodiesels produced from blends of canola oil and animal tallow(SILA SCIENCE, 2011-04) Adin, Hamit; Altun, Şehmus; Yaşar, FevziBiodiesel is an alternative diesel fuel that can be produced from renewable feedstocks such as vegetable oil or animal fats by transesterification with methanol for using in diesel engines. The viscosity and density of biodiesel fuels are important parameters due to being key fuel properties for injection and combustion process of diesel engines. These fuel properties mainly depend on the feedstock which is used in the biodiesel production. Also, lubricity is an important for diesel engine fuels due to the fuel injection systems are lubricated by the fuel itself. In this study, the blends containing 0, 25, 50, 75 and 100% of food-grade canola oil/inedible animal tallow in volume basis were prepared and converted into methyl esters by base-catalyzed transesterification. Effect of canola oil ration in the feedstock on the viscosity, density and lubricity were investigated. Lubricity was determined using the high-frequency reciprocating rig (HFRR) test. Experimental results showed that the kinematics viscosity of increased as animal tallow ratio increased in the feedstock, as animal tallow itself is more viscous than canola oil. Also, density did not change much when blended feedstocks were used. Besides, it was observed that lubricity of biodiesel fuels from blended feedstocks was slightly get worse compared with pure biodiesels.Öğe An experimentally investigation of usability of a blend of tallow methyl ester and diesel fuel substitution of diesel fuel in diesel engines(Gazi Üniversitesi, 2010-07-06) Aydın, Hüseyin; Altun, Şehmus; Öner, Cengiz; Yücel, Halit LutfiBiodiesel fuels is one of the most attractive alternative fuels to reduce both emissions and petroleum based fuel consumption resulted from diesel engines. Therefore, the effects of biodiesel fuels on long-term engine operation and deposits in engine are considerably important, when biodiesel was evaluated as the alternative fuel for diesel engines. In this study, a 100 h engine test was performed on a single cylinder diesel engine using diesel fuel and tallow methyl ester as biodiesel fuel in order to compare the effects of the fuels on engine operation and deposits. The biodiesel was blended with 80 vol% diesel fuel and 20 vol % tallow methyl ester. Also, short-term engine performance and emissions were investigated and compared using both fuels. The test engine was disassembled before and after the experiment to determine the difference and clean carbon deposits. Experimental results were similar for both fuels in long-term engine tests, and indicated that the engine was satisfactorily operated for 100 hours with blend fuel. Deposits in engine at the end of the 100 h test were comparable in amount, but slightly different in color and adhesive, with the blend fuel when compared with those of diesel fuel. Besides, the blend fuel was comparable with the performance of diesel fuel and the exhaust emissions were lower than that of diesel fuel. It is concluded at the results of engine tests; the blend fuel can be a suitable alternative fuel for diesel engines to substitute diesel.Öğe Biofuels derived from Turkish industry wastes - A study of performance and emissions in a diesel engine(Wiley-Blackwell, 2015-08-13) Altun, Şehmus; Rodríguez-Fernández, JoséRecently, research has focused on the biofuel production from local industrial wastes due to the risk of greenhouse emissions derived from land-use change (both directly and indirectly) of conventional feedstock and the social concern about the effect of conventional biofuel production on oil prices and its availability (the so-called food vs. fuel debate). Therefore, with the aim to evaluate the use of biofuels derived from wastes from traditional manufacturing industries in Turkey, biodiesel fuels from leather fat, obtained as a by-product in the leather industry, waste anchovy fish oil, derived from the fish-processing industry, and waste frying cottonseed oil achieved from food industry, have been tested in a three-cylinder DI diesel engine at a steady-state condition. In a previous work, the viability of these fuels was evaluated by analyzing measured and estimated properties and indicators for main diesel emissions, and recommendations were made on their alternative use to conventional biodiesels with the benefit of potentially lower life-cycle greenhouse emissions. The experimental results, which were compared with ULSD operation, demonstrated that the engine performance was not significantly affected, while a substantial change in emissions was observed with the use of biofuels. In general, the emission results reported here are in a similar range to those obtained with the use of conventional biodiesel fuels. Nonetheless, the exact magnitude of these changes depended upon the biodiesel origin. Lubricity of alternative biofuels was also tested, revealing an enormous capacity for protecting the fuel system from wear, in line with conventional biodiesel fuels.Öğe Effects of thermal barrier coating on the performance and combustion characteristics of a diesel engine fueled with biodiesel produced from waste frying cottonseed oil and ultra-low sulfur diesel(Taylor & Francis, 2016-09-01) Aydın, Selman; Sayın, Cenk; Altun, Şehmus; Aydın, HüseyinIn this study, the top surfaces of piston and valves of a four-strokes and direct-injection diesel engine have been coated—with no change in the compression ratio—with a 100 μm of NiCrAl lining layer via plasma spray method and this layer has later been coated with main coating material with a mixture of 88% of ZrO 2 , 4% of MgO and 8% of Al 2 O 3 (400 μm). Then, after the engine-coating process, ultra-low sulfur diesel (ULSD) as base fuels and its blend with used frying cottonseed oil derived biodiesel in proportion of 20%, volumetrically, have been tested in the coated engine and data of combustion and performance characteristics on full load and at different speeds have been noted. The results, which were compared with those obtained by uncoated-engine operation, showed that thermal efficiency increased, and engine noise reduced. Cylinder gas pressure values obtained from the diesel engine which has been coated with thermal barriers have been found to be somewhat higher than those of the uncoated-engine. Also, maximum pressure values measured in both engines and under the same experimental conditions through the use of test fuel have been obtained after TDC. Moreover, heat release rate and heat release have occurred earlier in the coated-engine. NOx emissions were increased while CO and HC emissions were remained almost the same with a little bit decrease.