5 sonuçlar
Arama Sonuçları
Listeleniyor 1 - 5 / 5
Öğe Control of barrier heigth ofmetal/semiconductor contacts bymolecular organic film(2011-06) Güllü, Ömer; Turut, Abdulmecit; Kılıçoğlu, Tahsin; Özerden, EniseÖğe Electrical characteristics of the Al/Congo Red (CR)/p-Si semiconductor diodes(Dumlupınar Üniversitesi, 2015-05) Güllü, Ömer; Pakma, Osman; Turut, Abdulmecit; Arsel, İsmailIn this work, we have studied the electrical characteristics of the Al/CR/p-Si MIS Schottky structures formed by coating of the organic material directly on p-Si substrate. It has been seen that the CR thin film on the p-Si substrate has indicated a good rectifying behavior. The barrier height and the ideality factor of the device have been calculated from the I-V characteristic. We have also studied the suitability and possibility of the MIS diodes for use in barrier modification of Si MS diodes. In addition, we have compared the parameters of the Al/CR/p-Si MIS Schottky diodes with those of conventional Al/p-Si MS diodes. We have observed that the b value of 0.77 eV obtained for the Al/CR/p-Si device was significantly larger than BH value of the conventional Al/p-Si MS contact. Thus, the modification of the interfacial potential barrier for metal/Si diodes has been achieved by using the CR organic interlayer. This was attributed to the fact that the CR interlayer increased the effective b by influencing the space charge region of Si. The interface-state density of the MIS diode was found to vary from 1.24×1013 eV-1 cm-2 to 2.44×1012 eV-1 cm-2.Öğe Electrical analysis of organic interlayer based metal/interlayer/semiconductor diode structures(Journal of Applied Physics, 2009-01) Güllü, Ömer; Turut, AbdulmecitIn this work, metal/interlayer/semiconductor (MIS) diodes formed by coating of an organic film to p-Si semiconductor substrate were prepared. Metal(Al)/interlayer (phenolsulfonphthalein=PSP)/semiconductor(p-Si) MIS device had a good rectifying behavior. By using the forward bias I-V characteristics, the values of ideality factor (n) and barrier height (Phi(b)) for the Al/PSP/p-Si MIS diode were obtained as 1.45 and 0.81 eV, respectively. It was seen that the Phi(b) value of 0.81 eV calculated for the Al/PSP/p-Si MIS diode was significantly larger than value of 0.50 eV of conventional Al/p-Si Schottky diodes. Modification of the interfacial potential barrier of Al/p-Si diode was achieved by using a thin interlayer of the PSP organic material. This has been attributed to the fact that the PSP organic interlayer increases the effective barrier height by influencing the space-charge region of Si. The interface-state density of the MIS diode was determined, and the interface-state density was found to vary from 3.00 x 10(13) to 2.99 x 10(12) eV(-1) cm(-2). (C) 2009 American Institute of Physics.Öğe Current-voltage, capacitance-voltage-frequency and ınterface characteristics ofmetal/organic dye molecule/P-Type Inp photovoltaic device(2011-09) Güllü, Ömer; Özerden, Enise; Kılıçoğlu, Tahsin; Turut, AbdulmecitÖğe Electrical characterization of the Al/new fuchsin/n-Si organic-modified device(Elsevier, 2010-03) Güllü, Ömer; Asubay, Sezai; Turut, Abdulmecit; Aydoğan, ŞakirThe current–voltage (I–V) and the capacitance–voltage (C–V) characteristics of the Al/new fuchsin (NF)/n-Si device have been investigated at room temperature. The I–V characteristic of the device shows a good rectification. The ideality factor and the barrier height from the I–V characteristics have been determined as 3.14 and 0.80 eV, respectively. A modified Norde's function combined with the conventional I–V method has been used to extract the parameters including the barrier height and the series resistance. The barrier height and the series resistance obtained from Norde's function have been compared with those from Cheung functions, and it has been seen that there was a good agreement between those from both method. It has also been seen that the values of diode capacitance increased up to the constant values for the forward bias.
