2 sonuçlar
Arama Sonuçları
Listeleniyor 1 - 2 / 2
Öğe Electrical characteristics of the Al/Congo Red (CR)/p-Si semiconductor diodes(Dumlupınar Üniversitesi, 2015-05) Güllü, Ömer; Pakma, Osman; Turut, Abdulmecit; Arsel, İsmailIn this work, we have studied the electrical characteristics of the Al/CR/p-Si MIS Schottky structures formed by coating of the organic material directly on p-Si substrate. It has been seen that the CR thin film on the p-Si substrate has indicated a good rectifying behavior. The barrier height and the ideality factor of the device have been calculated from the I-V characteristic. We have also studied the suitability and possibility of the MIS diodes for use in barrier modification of Si MS diodes. In addition, we have compared the parameters of the Al/CR/p-Si MIS Schottky diodes with those of conventional Al/p-Si MS diodes. We have observed that the b value of 0.77 eV obtained for the Al/CR/p-Si device was significantly larger than BH value of the conventional Al/p-Si MS contact. Thus, the modification of the interfacial potential barrier for metal/Si diodes has been achieved by using the CR organic interlayer. This was attributed to the fact that the CR interlayer increased the effective b by influencing the space charge region of Si. The interface-state density of the MIS diode was found to vary from 1.24×1013 eV-1 cm-2 to 2.44×1012 eV-1 cm-2.Öğe Electrical characterization of the Al/new fuchsin/n-Si organic-modified device(Elsevier, 2010-03) Güllü, Ömer; Asubay, Sezai; Turut, Abdulmecit; Aydoğan, ŞakirThe current–voltage (I–V) and the capacitance–voltage (C–V) characteristics of the Al/new fuchsin (NF)/n-Si device have been investigated at room temperature. The I–V characteristic of the device shows a good rectification. The ideality factor and the barrier height from the I–V characteristics have been determined as 3.14 and 0.80 eV, respectively. A modified Norde's function combined with the conventional I–V method has been used to extract the parameters including the barrier height and the series resistance. The barrier height and the series resistance obtained from Norde's function have been compared with those from Cheung functions, and it has been seen that there was a good agreement between those from both method. It has also been seen that the values of diode capacitance increased up to the constant values for the forward bias.
