Arama Sonuçları
Listeleniyor 1 - 10 / 322
Öğe N-type InP Schottky diodes with organic thin layer: Electrical and interfacial properties(Journal of Vacuum Science & Technology B, 2010-03) Güllü, Ömer; Turut, AbdulmecitThe rectifying junction characteristics of methyl red (MR) organic film on n-type InP substrate have been studied. It has been observed that MR-based structure shows an excellent rectifying behavior and that the MR film increases the effective barrier height by influencing the space charge region of the n-type InP. The barrier height and ideality factor values for this structure have been obtained as 0.75 eV and 1.93 from the forward bias current-voltage characteristics, respectively. By using capacitance-voltage characteristics at 1 MHz, the barrier height and the carrier concentration values have been calculated as 0.93 eV and 5.13×1015 cm−3, respectively. The energy distributions of the interface states and their relaxation times have been determined from the forward bias capacitance-frequency and conductance-frequency characteristics. Moreover, it was seen that both the interface-state density and the relaxation time of the interface states decreased with bias voltage from experimental results.Öğe Dijital eğitimde eşitsizlikler : Kırsal-kentsel ayrımlar ve sosyoekonomik farklılaşmalar(İnsan ve Toplum / The Journal of Humanity and Society, 2020-12) Nerse, SerdarGelir ve ekonomi temelli eşitsizliklerin yanı sıra toplumu doğrudan etkileyen “sosyal eşitsizlikler” de yeterince anlaşılamamıştır. Bu nedenle farklı bileşenlerle eşitsizlikler en iyi ihtimalle ölçülmekte ve incelenmektedir. Sosyal eşitsizlik; yeni durum, olay ve sorunların gelişmesi nedeniyle göreceli olarak bir dizi yeni boyut, beklenti ve sonuç ortaya çıkarmaktadır. Küresel ve ulusal ölçekte yaşanan yeni gelişme, genişleme ve daralmalar, eğitimde eşitsizliğin tekrar tartışılması gerektiğini ortaya çıkarmıştır. Bu çalışmada da kırsal-kentsel ayrımlar ile sosyoekonomik farklılaşmalar temelinde Covid-19 salgını sürecinde dijital eğitimde ortaya çıkan eşitsizlikler incelenmiştir. Bu iki ayrıma bağlı olarak salgın sürecinde evde uzaktan eğitime katılmaya çalışan üniversite öğrencilerinin dijital medya, internet, bilgi ve iletişim teknolojilerine (DİB) erişim ve kullanımlarındaki eşitsizliklerin ortaya çıkarılması amaçlanmıştır. Yaş, cinsiyet, ikamet yeri, okuduğu sınıf ve sosyoekonomik statüsüne göre 3 ayrı üniversiteden seçilen toplam 16 öğrenci araştırmaya dâhil edilmiştir. Nitel yöntemin uygulandığı araştırmada, veriler, derinlemesine görüşmelerle elde edilmiştir. Görüşme verileri, Maxqda nitel veri analiz programıyla kategorileştirilmiş ve temalara dönüştürülmüştür. Açık, eksenel ve seçici kodlama neticesinde birleştirilen kategori ve temalar görselleştirilmiştir. Katılımcıların bireysel ve aile özellikleri, okulların çevresi ve mali kaynak durumları, kalkınma, özgürleşme, kültürlenme faktörleri etkileşimli şekilde eşitsizliği ortaya çıkarıcı etkiye sahip olduğu gibi dijital eğitim eşitsizliğinde kırsal-kentsel ayrım ve sosyoekonomik farklılaşmaların belirgin olduğu görülmektedir.Öğe Investigation of plasma arc cutting parameters with type-2 fuzzy set and system(De Gruyter, 2013-10) Çelik, Yahya Hışman; Özek, Cebeli; Bulut Özek, MüzeyyenThe objective of the present study was it to design a type-2 fuzzy set and system in order to predict surface roughness and hardness depending on the parameters (material thickness, cutting speed, arc voltage and current) of the plasma arc cutting process of S235JR sheet materials. Therefore, some experimental studies were conducted. The experimentally determined data were used to describe the type-2 fuzzy set and system. Type-2 fuzzy set and system was found to be usefull to predict surface roughnes and hardness. According to the obtained values, the best surface roughness and the values closest to the hardness of the raw material were obtained at 1500 mm/min cutting speed, 8 mm material thickness, 115 V arc voltage and 80 A current.Öğe An exergy analysis of a concentric tube heat exchanger using hBN-water nanofluids(Inder Science Publishers, 2021) Budak Ziyadanoğulları, Neşe; Perçin, SüleymanThis study investigated the effects of using nanofluids prepared with hexagonal boron nitride (hBN) nanoparticles on the thermal performance and pressure drop of a concentric tube heat exchanger. Experiments were carried out with water-hBN nanofluids for stable, dispersed, 0.01%, 0.1% and 1% volume concentrations, at different flow rates and Reynolds numbers under parallel and counter-flow conditions. When the experimental results were examined, the exergy loss was higher in the parallel-flow heat exchanger compared to the counter-flow heat exchanger. The highest exergy loss value was obtained for distilled water at the highest Reynolds number (Re = 8,700) for parallel flow operation at 170 W. The exergy loss of water at the highest Reynolds number (Re = 8,700) for parallel flow operation increased by 15.7%, 24.8% and 49.8% for hBN-water concentrations of 0.01%, 0.1% and 1%, respectively. Exergy loss of water at the highest Reynold number (Re = 8,700) for counter flow operation increased by 11.3%, 17.3% and 29.2% for hBN-water concentrations of 0.01%, 0.1% and 1%, respectively. When evaluating the exergy analysis of the system, exergy losses due to pressure drops were negligible for both flows (parallel and counter).Öğe The effect of Plantago major Linnaeus on serum total sialic acid, lipid-bound sialic acid, some trace elements and minerals after administration of 7,12-dimethylbenz(a)anthracene in rats(SAGE, 2012-04) Oto, Gökhan; Ekin, Suat; Özdemir, Hülya; Levent, Abdulkadir; Berber, İsmetThe present study was designed to evaluate the effect of Plantago major Linnaeus (PM) extract on serum total sialic acid (TSA), lipid-bound sialic acid (LSA), some trace elements (copper (Cu), zinc (Zn) and iron) and mineral levels (magnesium, calcium and sodium) in Wistar albino rat administrated 7,12-dimethylbenz(a)anthracene (DMBA). Rats were divided into three equal groups (n = 6). Group I comprised the control group, group II was treated with DMBA (100 mg/kg, single dose) and group III was treated with DMBA (100 mg/kg single dose) and aqueous extract of PM 100 mg/kg/day for 60 days. After 60 days, statistical analyses showed that TSA and LSA levels in DMBA and DMBA + PM groups were significantly higher compared to the control group (TSA: p < 0.01, p < 0.05; LSA: p < 0.05, p < 0.05, respectively). Serum Zn levels were decreased in subjects treated with DMBA (p < 0.01) and DMBA + PM (p < 0.05) compared to the control group values. Serum Cu levels were increased in DMBA group and PM-treated group compared to the control group values. The results of this investigation showed that the levels of TSA and LSA changed significantly, which are sensitive markers for detecting the toxic effects of DMBA. On the other hand, observed decline in Zn levels in rats from DMBA + PM group might be due to decreased generation of free radicals and oxidative stress. Results from this study suggest that PM may be partially effective in preventing carcinogenesis initiated by environmental carcinogen DMBA.Öğe Taming the late Quaternary phylogeography of the Eurasiatic wild ass through ancient and modern DNA(PLoS One, 2017-04-19) Gündem, Can Yumni; Bennett, E Andrew; Champlot, Sophie; Peters, Joris; Arbuckle, Benjamin S; Guimaraes, Silvia; Pruvos, Mlanie; David, Shirli Bar; Davis, Simon J M; Gautier, Mathieu; Kaczensky, Petra; Kuehn, Ralph; Mashkour, Marjan; Morales, Arturo; Muiz, Morales; Pucher, Erich; Tournepiche, Jean François; Uerpmann, HansPeter; Blşescu, Adrian; Germonpr, Mietje; Moull, Pierre Elie; Ötzan, Aliye; Walzer, Chris; Grange, Thierry; Geigl, Eva MariaTaxonomic over-splitting of extinct or endangered taxa, due to an incomplete knowledge of both skeletal morphological variability and the geographical ranges of past populations, continues to confuse the link between isolated extant populations and their ancestors. This is particularly problematic with the genus Equus. To more reliably determine the evolution and phylogeographic history of the endangered Asiatic wild ass, we studied the genetic diversity and inter-relationships of both extinct and extant populations over the last 100,000 years, including samples throughout its previous range from Western Europe to Southwest and East Asia. Using 229 bp of the mitochondrial hypervariable region, an approach which allowed the inclusion of information from extremely poorly preserved ancient samples, we classify all non-African wild asses into eleven clades that show a clear phylogeographic structure revealing their phylogenetic history. This study places the extinct European wild ass, E. hydruntinus, the phylogeny of which has been debated since the end of the 19th century, into its phylogenetic context within the Asiatic wild asses and reveals recent mitochondrial introgression between populations currently regarded as separate species. The phylogeographic organization of clades resulting from these efforts can be used not only to improve future taxonomic determination of a poorly characterized group of equids, but also to identify historic ranges, interbreeding events between various populations, and the impact of ancient climatic changes. In addition, appropriately placing extant relict populations into a broader phylogeographic and genetic context can better inform ongoing conservation strategies for this highly-endangered species.Öğe Numerical and experimental investigation of solar chimney power plant system performance(Taylor & Francis, 2020-03-15) Karakaya, Hakan; Durmuş, Aydın; Avcı, Ali SerkanA prototype of a solar chimney power plant was performed by modeling in this study. The performed prototype was experimentally confirmed. Temperature, velocity, and radiation values were measured to actualize the confirmation. Experimental data that were obtained to determine the performance of solar chimney whose prototype was actualized by the help of measured values were computationally analyzed. The geometry of a solar chimney in the analysis was bidimensionally (2D) drawn on an axis of symmetry. The numerical simulation was analyzed with computational fluid dynamics (CFD) method. Since analysis results show that there is turbulent flow in system (RNG), k-ɛ turbulence model was used. Continuity, momentum, and energy equations were applied to the solar chimney system via the finite volume method. Moreover, DO (discrete ordinates) model was inserted in analysis to evaluate the radiation effect in the collector area. In addition to all these, correlation results between SPSS 17 statistics program and data obtained were evaluated. Finally, with reference to the comparison between numerical and experimental results, data obtained and numerical data are close to each other; the prototype is applicable to the real systems.Öğe Combustion, performance and emissions of a diesel power generator fueled with biodiesel-kerosene and biodiesel-kerosene-diesel blends(Elsevier, 2017-02-05) Bayındır, Hasan; Işık, Mehmet Zerrakki; Argunhan, Zeki; Yücel, Halit Lütfi; Aydın, HüseyinHigh percentages of biodiesel blends or neat biodiesel cannot be used in diesel engines due to high density and viscosity, and poor atomization properties that lead to some engine operational problems. Biodiesel was produced from canola oil by transesterification process. Test fuels were prepared by blending 80% of the biodiesel with 20% of kerosene (B80&K20) and 80% of the biodiesel with 10% of kerosene and 10% diesel fuel (B80&K10&D10). Fuels were used in a 4 cylinders diesel engine that was loaded with a generator. Combustion, performance and emission characteristics of the blend fuels and D2 in the diesel engine for certain loads of 3.6, 7.2 and 10.8 kW output power and 1500 rpm constant engine speed were experimented and deeply analyzed. It was found that kerosene contained blends had quite similar combustion characteristics with those of D2. Mass fuel consumption and Bscf were slightly increased for blend fuels. HC emissions slightly increased while NOx emissions considerably reduced for blends. It was resulted that high percentages of biodiesel can be a potential substitute for diesel fuel provided that it is used as blending fuel with certain amounts of kerosene.Öğe Investigation of low velocity impact behaviors of honeycomb sandwich composites(SpringerLink, 2018-08-09) Topkaya, Tolga; Solmaz, Murat YavuzHoneycomb sandwich composites are used as significant structural members in advanced engineering applications. Thus, it is critical to determine how they behave under impact loading, in addition to other loads. In this study, low velocity impact loading behaviors of honeycomb sandwich composites were experimentally investigated. Almost all of the design parameters of honeycomb sandwich composites were investigated. The results indicated that the core thickness of honeycomb had no effect on the strength of the composite, and the parameter influencing the impact behavior of the specimen the most was the face sheet thickness. When the face sheet thickness of the specimen was increased, the most apparent strength increase was observed in the models using carbon fiber-reinforced composite face sheets. For all face sheet types subject to impact energy of 10 Joules, the upper face sheets of 0.5 mm-thick specimens were perforatedÖğe Hardness and wear behaviours of al matrix composites and hybrid composites reinforced with B 4 C and SiC(Springer Nature, 2019-01-15) Çelik, Yahya Hışman; Kılıçkap, ErolThe conversion into the desired shape of the metal powders using Powder Metallurgy (PM) method enables economically mass productions. This case allows producing parts with complex and high dimensional accuracy with no machining. In this study the composites and hybrid composites with Al matrix were produced using PM method with different ratios B4C and SiC. Microhardness and wear experiments of the produced composites were investigated. Wear experiments were performed at a constant speed of 0.5 m/s, application loads of 5, 10 and 15 N and sliding distances of 250, 500, and 750 m. Then, SEM images of composites and hybrid composites were captured. The increase of the reinforcement ratio in the composites contributed to the increase of the hardness. The highest hardness value was computed as 58.7 HV from 16% B4C reinforced composite. In addition, the increase in the reinforcement ratio contributed to the increase of the wear resistance. The increase in the load and sliding distance also increased the wear. The minimum weight loss was calculated as 18 mg from 5 N load, 250 m sliding distance and 16% SiC reinforced composite.
