28 sonuçlar
Arama Sonuçları
Listeleniyor 1 - 10 / 28
Öğe N-type InP Schottky diodes with organic thin layer: Electrical and interfacial properties(Journal of Vacuum Science & Technology B, 2010-03) Güllü, Ömer; Turut, AbdulmecitThe rectifying junction characteristics of methyl red (MR) organic film on n-type InP substrate have been studied. It has been observed that MR-based structure shows an excellent rectifying behavior and that the MR film increases the effective barrier height by influencing the space charge region of the n-type InP. The barrier height and ideality factor values for this structure have been obtained as 0.75 eV and 1.93 from the forward bias current-voltage characteristics, respectively. By using capacitance-voltage characteristics at 1 MHz, the barrier height and the carrier concentration values have been calculated as 0.93 eV and 5.13×1015 cm−3, respectively. The energy distributions of the interface states and their relaxation times have been determined from the forward bias capacitance-frequency and conductance-frequency characteristics. Moreover, it was seen that both the interface-state density and the relaxation time of the interface states decreased with bias voltage from experimental results.Öğe Küllüoba’da İlk Tunç Çağı'nda beslenme alışkanlıkları ve bölgesel karşılaştırması(Arkeoloji ve Sanat, 2019) Gündem, Can YumniÖğe Militarist şiddetin mağduru olan kadınlar: 1938 Dersim olayları(Dokuz Eylül Üniversitesi, 2017-03-20) Arslan, YusufKadınlara yönelik militarist şiddet geçmişte olduğu gibi bugün de devam eden şiddet türlerinden biridir. Özellikle isyan, savaş, darbe gibi olağanüstü dönemlerde her zaman kadınlara dönük bu tip bir şiddete daha sık rastlanmaktadır. Erken Cumhuriyet döneminde çıkan isyanlarda bazı askerler kadına yönelik fiziksel, psikolojik ve cinsel şiddet eylemlerinde bulunmuşlardır. Bu araştırmada 1938 yılında Tunceli bölgesinde bu tip mağduriyetlerin yaşandığı yönünde ciddi bulgulara erişilmiş, Dersimli kadınların deneyim ve tanıklıklarına yer verilmiştir. Meydana gelen bu üzücü olayları operasyonda görevli askerlerin hepsine mal etmek doğru değildir ve böyle bir yaklaşım o askerlere haksızlık olacaktır. İsyan bölgesinde ele geçirilmiş kadınlara merhametli davranıp, cansiperane onların can, mal, ırz ve namuslarını koruyan askerlerin varlığı da bir gerçektir. “Tarih değil hatalar tekerrür eder” diyen II. Abdülhamid’in ifade ettiği gibi yaşananlardan dersler çıkararak bundan sonrasında bu tip trajedilerden korunmak ve bu hataların bir daha yaşanmasına izin vermemek gerekmektedirÖğe A general view to political and economic events causing the collapse of Mamluk State(Energy Education Science&Technology, Part B, 2012-04) Ağır, Abdullah Mesut; Solak, Kemal; Şen, Mehmet Emin; Platin, İhsann this manuscript, the collapse of Mamluk State, which reigned in Egypt and Syria between the years 1250 and 1517 has been studied. Throughout our study, there found different reasons causing this collapse; the most important ones of which are political and economic. The fact that Mamluk System which had crucial role in Mamluk administration Mechanism and the problems lived along its north border are the fundamental collapsing reasons of the state. Indeed, the fights starting with Mongols and Armenians in the north of the state continued with Anatolian Turkmens and Timurids, eventually Ottomans coming from the same direction caused it to be collapsed. Mamluks were the commercial centre between east and west. At the same time, Syria owned a very industrious trade network between Anatolia. However, the geographical discoveries that Europeans carried out and the Portuguese not only military but also commercial activities in the Indian Ocean weakened Mamluks economically. In addition to this, military struggles along the north border of the state caused incompensable deficits in Mamlûk finance. Consequently, when all these negative aspects combined with an unmodernized army, Mamlûk State closed its era in 1517, when Ottoman army defeated it in Reydaniye, which was the end of a 267 year-old-state.Öğe Effects of particle reinforcement on the bending and compressive behaviors of composite pipes(Materials Testing, 2019-11) Adin, HamitIn this study, the effects of adding particles to composite pipes were examined. For the study, composite pipes reinforced with particles were produced by using structural epoxy adhesive and mica as the particle. Composite pipes oriented at [-45 °/+45 °] were manufactured by the hand lay-up method. The composite pipes were loaded axially for measuring bending and compressive strength. When bending and compression loads are applied in the experiments it was seen that the particle reinforced methods indicated in the literature have a great effect of on the strength of the bending and compressive behaviour. The results show that addition of particles enhances compressive and bending strength.Öğe The changes in the serum, liver, kidney protein and genomic DNA profiles in rats treated with 7,12-Dimethylbenz(A) anthracene and Plantago major L.(RJPBCS, 2014-01) Berber, İsmet; Ekin, Suat; Levent, Abdulkadir; Oto, Gökhan;In the study, the changes in the serum, liver, kidney protein and genomic DNA profiles in Wistar albino rats administrated to 7,12-dimethylbenz(a)anthracene (DMBA) and Plantagomajor L. were investigated. SDS-PAGE profiling of the serum proteins showed that the levels of two proteins molecular weighing 140.8 kDa and 46.8 kDa were significantly lower on the 0th day of treatment than on the 60th day of application in the groups. Furthermore, two proteins (34.5 and 22.3 kDa) were solely present in DMBA-treated liver cell lysates. On the contrary, the kidney protein profiles did not show significant banding variations in groups. Genomic DNA analysis also confirmed that DNA extracted from liver and kidney cells did not fragment in any of the groups after the 60th study day. The proteins 34.5 and 22.3 kDa in liver cell lysates at the 60th day in DMBA-treated group could be extra-prognostic indicators for severe DMBA toxicity.Öğe Dimension and insulation thickness optimization of circular flat plate solar collectors(Energy Education Science and Technology, 2011) Argunhan, ZekiIn this study, expressions for optimum radius of a circular flat plate solar collector and the optimum insulation thickness distribution are derived by using the concept of solar gain, which maximizes the life-cycle savings. For the specified condition the optimum radius has been found as 2.14 m and the optimum insulation thickness distribution on back of collectors has been formulized. The insulation material thickness distribution has been determined by performing a detailed dimensional analysis; therefore heat loss is minimized, and results are presented in graphics.Öğe The effects of injection pressure on the engine performance characteristics of a CI engine fueled with canola oil-diesel blends(Energy Education Science and Technology Part A: Energy Science and Research, 2012-01) Aydın, HüseyinThe usage of vegetable oils in diesel engines has some negative effects especially on engine performance. Therefore vegetable oils can not be used as pure form or with high percentages in diesel fuel in unmodified diesel engines. Some of the engine operation conditions should be improved by modifying engine operation systems for this purpose. The effects of injection pressure on engine performance of a diesel engine, by using two different blends of vegetable oil (canola oil) in diesel fuel (DF) having a concentration of 20% (O20) and 50% (O50) vegetable oil, were studied in the present work. The injection pressure was changed from 200 MPa to 220 MPa. Tests were made at fully loaded engine and different speeds of engine operation. In the experiments, the engine power, torque, brake specific fuel consumption (Bsfc), mass fuel consumption rate, brake thermal efficiency and exhaust gas temperature of the test engine have been investigated. Results revealed that the increased injection pressure can significantly promote performance parameters of diesel engine with using vegetable oil without any modification either in oil or in engine itself. The improved results of experiments have been given as graphics in this paper.Öğe Influence of yogurt adding on physicochemical and sensorial properties of some lettuce types(WFL Publisher, 2013) Tarakçı, Zekai; Uǧur, Atnan; Temiz, Hasan; Dağ, BeşirThe aim of this study was to investigate the effects of adding yogurt and roasting treatment on some physicochemical, L*, a* and b* colour values and organoleptic acceptability properties of lettuce types. The 10 different lettuce varieties included kasam, mangano, robinson, olenka, arapsaçi{dotless}, red leaf, lolorosso, red salat, palamet and salanova were used. After cleaning and cutting into 0.5 mm, the lettuces were roasted with equal amount added yogurt for about 5 min and then applied to the mixing process. There were significant differences in dry matter and pH values between the lettuces added yogurt and raw lettuces. While dry matter of lettuces was increased significantly with yogurt, the pH levels were decreased. The whiteness values (L*) for lettuces have caused significant differences by adding yogurt and roasting applications. L* values of control sample without lettuces were significantly higher than the samples prepared by adding yogurt to lettuces. Lettuce types had a significant effect on the L* colour of samples. The lettuces were a significant a* color values between before and after roasting. After adding yogurt to lettuces; b* values of kasam, robinson and olenka colour values were significantly higher than the other samples prepared by adding yogurt to lettuce types. The lowest overall acceptability scores were detected for olenka, robinson and lolorosso lettuce types while the highest overall acceptability scores were detected for arapsaci, red salat and salanova lettuce types, which were common use in Turkish meals.Öğe Morphological, structural and optical characteristics of graphene oxide layers and metal/interlayer/semiconductor photovoltaic diode application(National Institute of Research and Development for Optoelectronics, 2018) Güllü, Ömer; Çankaya, MuratThis work describes the optical, morphological and structural characterizations of graphene oxide (GO) layers grown by drop casting and annealing process. UV-vis optical measurement shows that the values of direct and indirect optical gap energy of the GO film are 3.89 eV and 3.21 eV, respectively. The graphene oxide (GO) layer has been placed in the metal/ interlayer /semiconductor (MIS) diodes (total 17 devices) on p-Si wafers. The graphene oxide diodes give a better barrier height enhancement as compared with the conventional diodes. The value of homogeneous barrier height for Al/GO/p-Si MIS junctions was extracted as 0.74 eV. The diodes were also investigated under 300 watt light illumination for photovoltaic applications. Additionally, interfacial properties of the MIS diode with GO interlayer were determined. It has been seen that the capacitance of the device changes as a function of gate voltage and signal frequency from the capacitance-frequency measurements. It has also been reported that the interfacial trap charges reduce the capacitance with increasing frequency values.
- «
- 1 (current)
- 2
- 3
- »
