30 sonuçlar
Arama Sonuçları
Listeleniyor 1 - 10 / 30
Öğe Hardness and wear behaviours of al matrix composites and hybrid composites reinforced with B 4 C and SiC(Springer Nature, 2019-01-15) Çelik, Yahya Hışman; Kılıçkap, ErolThe conversion into the desired shape of the metal powders using Powder Metallurgy (PM) method enables economically mass productions. This case allows producing parts with complex and high dimensional accuracy with no machining. In this study the composites and hybrid composites with Al matrix were produced using PM method with different ratios B4C and SiC. Microhardness and wear experiments of the produced composites were investigated. Wear experiments were performed at a constant speed of 0.5 m/s, application loads of 5, 10 and 15 N and sliding distances of 250, 500, and 750 m. Then, SEM images of composites and hybrid composites were captured. The increase of the reinforcement ratio in the composites contributed to the increase of the hardness. The highest hardness value was computed as 58.7 HV from 16% B4C reinforced composite. In addition, the increase in the reinforcement ratio contributed to the increase of the wear resistance. The increase in the load and sliding distance also increased the wear. The minimum weight loss was calculated as 18 mg from 5 N load, 250 m sliding distance and 16% SiC reinforced composite.Öğe Finite element analysis of the stress distributions in peri-implant bone in modified and standard-threaded dental implants(Taylor & Francis, 2016-01) Topkaya, Tolga; Dündar, Serkan; Solmaz, Murat Yavuz; Yaman, Ferhan; Atalay, Yusuf; Saybak, Arif; Asutay, Fatih; Çakmak, ÖmerThe aim of this study was to examine the stress distributions with three different loads in two different geometric and threaded types of dental implants by finite element analysis. For this purpose, two different implant models, Nobel Replace and Nobel Active (Nobel Biocare, Zurich, Switzerland), which are currently used in clinical cases, were constructed by using ANSYS Workbench 12.1. The stress distributions on components of the implant system under three different static loadings were analysed for the two models. The maximum stress values that occurred in all components were observed in FIII (300 N). The maximum stress values occurred in FIII (300 N) when the Nobel Replace implant is used, whereas the lowest ones, in the case of FI (150 N) loading in the Nobel Active implant. In all models, the maximum tensions were observed to be in the neck region of the implants. Increasing the connection between the implant and the bone surface may allow more uniform distribution of the forces of the dental implant and may protect the bone around the implant. Thus, the implant could remain in the mouth for longer periods. Variable-thread tapered implants can increase the implant and bone contact.Öğe Experimental investigation of solar stills integrated with solar water heating collectors(Türk Isı Bilimi ve Tekniği Derneği, 2017-10-31) Argunhan, Zeki; El, Emin; Yıldız, Cengiz; Çakmak, GülşahSolar still is a more practical way of obtaining clean water. In this study, we aimed to improve the efficiency of solar still systems and obtain distilled water at the same time. For this purpose, 5 different solar still systems were designed. Type 1; conventional solar still, Type 2; conventional solar still integrated with solar water heating collector and run via natural convection, Type 3; conventional solar still integrated with solar water heating collector and tubular heat exchanger and run via natural convection, Type 4; conventional solar still placed with plate heat exchanger and integrated with solar water heating collector and run via natural convection, Type 5; conventional solar still placed with plate heat exchanger and integrated with solar water heating collector and run via forced convection. In this study, the experiments were carried out on the parameters influencing the performance, the amount of distilled water obtained, and the efficiency of experiment settings designed in different types; and finally the results were presented. The amount of distilled water and efficiency of conventional solar still were 2389 ml and 51.47%, respectively. Maximum total amount of water and efficiency from natural convection systems were obtained from Type 4, and the values calculated were found as to be 5788 ml and 55.91%. Maximum amount of distilled water and the efficiency were obtained by utilizing forced convection system were found as to be 6068 ml and 58.99%, respectively.Öğe A generalization of the Katzman-Zhang algorithm(Elsevier, 2021-03) Yeşil, MehmetIn this paper, we study the notion of special ideals. We generalize the results on those as well as the algorithm obtained for finite dimensional power series rings by Mordechai Katzman and Wenliang Zhang to finite dimensional polynomial rings.Öğe Geochemical features of the Menteşe Formation dolostones (Rhaetian) in the Karacahisar-Kasımlar area (Isparta-Turkey)(SpringerLink, 2018-08) Dinç, Salih; Özkan, Ali MüjdatThe purpose of this study is to determine the geochemical characteristics of the Menteşe dolostones (Rhaetian) in the west Taurus Mountains, Turkey. The isotope characteristics of the Menteşe dolostones show a variation in the δ18O values of the dolomites between + 1.35 and − 2.72‰ (VPDB) and a variation in the δ13C values of the dolomites between + 1.6 and + 3.33‰ (VPDB). Most of the Menteşe dolostone samples have positive oxygen isotope values; others have weak negative isotope values, which indicate early diagenetic development. In addition, oxygen, carbon, and strontium isotopes and trace element analyses suggest that these dolostones were probably resulted from insignificant recrystallizaion process than chemically similar fluids. Furthermore, Mn/Sr values of the Menteşe dolostones indicate that there is no significant diagenetic alteration. The total REE contents of the Menteşe Formation dolostones display a strong positive correlation with Si, Al, Fe, K, Ti, Ba, Rb and negative correlation with Mg, hence REE content is associated with in the first degree titanium-bearing minerals (probably sphene, rutile, anatase), second degree phosphate (apatite), and barium and rubidium-bearing minerals (probably barite). Ce anomalies versus Nd concentrations of the Menteşe dolostone samples indicate that these dolostones are formed in an anoxic environment. In addition, the K/Rb ratios of the Menteşe dolostones are not exposed to any metamorphism and indicate some diagenetic alteration. Calculated temperature values using δ18O values of the Menteşe dolostones yield precipitation temperatures of 17 to 42 °C, and suggest burial depths of 67 to 900 m. Sources of magnesium for dolomitization of the Menteşe Formation carbonates were most likely fluids from seawater and/or diagenetic brines (slightly modified seawater). The Menteşe dolostones formed as early diagenetic (Rhaetian to Cenomanian) in shallow burial areas at lower temperatures than seawater and/or diagenetic brines (slightly modified seawater).Öğe A novel approach for extracting ideal exemplars by clustering for massive time-ordered datasets(TÜBİTAK, 2017-07-30) Ertuğrul, Ömer FarukThe number and length of massive datasets have increased day by day and this yields more complex machine learning stages due to the high computational costs. To decrease the computational cost many methods were proposed in the literature such as data condensing, feature selection, and filtering. Although clustering methods are generally employed to divide samples into groups, another way of data condensing is by determining ideal exemplars (or prototypes), which can be used instead of the whole dataset. In this study, first the efficiency of traditional data condensing by clustering approach was confirmed according to obtained accuracies and condensing ratios in 9 different synthetic or real batch datasets. This approach was then improved to be employed in time-ordered datasets. In order to validate the proposed approach, 23 different real time-ordered datasets were used in experiments. Achieved mean RMSEs were 0.27 and 0.29 by employing the condensed (mean condensed ratio was 97.17%) and the whole datasets, respectively. Obtained results showed that higher accuracy rates and condensing ratios were achieved by the proposed approach.Öğe Analysis of interface states of Al/DNA/p-Si MIS photovoltaic structures with DNA biomolecules using the conductance technique(Taylor & Francis, 2017-03-29) Güllü, ÖmerIn this study, we report on the calculation of interface charge distribution of metal–interlayer–semiconductor (MIS) photovoltaic diodes containing DNA biomolecules and Si semiconductor based on the conductance technique. DNA biofilms were deposited at room temperature using a simple cast method on p-type Si. Interface parameters of the Al/DNA/p-Si structures were investigated by using capacitance–voltage (C–V) and conductance–voltage (G–V) measurements as a function of frequency. The distributions of interfacial charge states and the trap relaxation times were reported. Also, photoelectric and photocapacitance properties of the diode were measured at room temperature.Öğe Electronic properties of Cu/n-InP metal-semiconductor structures with cytosine biopolymer(Polska Akademia Nauk, 2015-09) Güllü, Ömer; Türüt, AbdülmecitThis work shows that cytosine biomolecules can control the electrical characteristics of conventional Cu/n-InP metal-semiconductor contacts. A new Cu/n-InP Schottky junction with cytosine interlayer has been formed by using a drop cast process. The current-voltage (I-V) and capacitance-voltage (C-V) characteristics of Cu/cytosine/n-InP structure were investigated at room temperature. A potential barrier height as high as 0.68 eV has been achieved for Cu/cytosine/n-InP Schottky diodes, which have good I-V characteristics. This good performance is attributed to the effect of interfacial biofilm between Cu and n-InP. By using C-V measurement of the Cu/cytosine/n-InP Schottky diode the diffusion potential and the barrier height have been calculated as a function of frequency. Also, the interface-state density of the Cu/cytosine/n-InP diode was found to vary from 2:24 × 1013 eV-1cm-2 to 5.56× 1012 eV-1 cm-2.Öğe Prediction of pressure and temperature changes in the salt caverns of Tuz Golu underground natural gas storage site while withdrawing or injecting natural gas by numerical simulations(Springer Nature, 2019-03-13) Merey, ŞükrüTuz Golu (Salt Lake) Underground Gas Storage (UGS) Project in Turkey is being implemented. In some of salt caverns, natural gas is currently stored. While analyzing the data of Tuz Golu UGS project, it was observed that this location is appropriate for safe underground natural gas storage due to its rock salt with high purity and very low permeability. In this study, many numerical simulations for a salt cavern in Tuz Golu UGS project at different gas withdrawal and injection rates were conducted by using TOUGH+RealGasBrine simulator. According to the results of these numerical simulations, the temperature inside salt cavern reduced below 0 degrees C from 53 degrees C within 20days at a rate of gas withdrawal of 3.33 million standard m(3)/day due to Joule-Thomson effect. The temperature inside salt cavern reduced below 0 degrees C within 25days, 40days, and 60days at a rate of gas withdrawal of 2.5, 1.67, and 0.833 million standard m(3), respectively. In order to avoid fracture around the walls of salt cavern, the temperature change inside salt cavern should not be higher than 30 degrees C. In the numerical simulations, there is no gas seepages from the salt cavern to other neighbor salt caverns, which are 600m away owing to very low permeability of salt rock in the study area. The implication of this study is that gas withdrawal and gas injection profiles are quite important to keep the temperature inside salt caverns at an optimum range for safe natural gas storage.Öğe Separation, optimization, and quantification of cytokinins by a recently developed amide-embedded stationary phase(Taylor & Francis, 2017-07-06) Aral, Hayriye; Haşimi, Duygu; Aral, Tarık; Levent, Abdulkadir; Ziyadanoğulları, BerrinIn this study, some plant growth regulators known as cytokinins [kinetin (K), zeatin (Z), thidiazuron (TDZ), benzylaminopurine (BAP), and dimethylallylaminopurine (AAP)] were separated by HPLC using an amide-embedded mixed-mode stationary phase which was synthesized by Aral et al. in recent years. The effect of mobile phase content, mobile phase pH, buffer concentration, and temperature on separation process was studied. In addition, a quantitative determination of cytokinins from Salvia limbata extract was studied, and some validation parameters such as limit of detection (LOD), limit of quantification (LOQ), and relative standard deviation (RSD) were calculated as a range of 0.03–0.1, 0.1–0.26 mg/L, and 0.03–0.08, respectively.
- «
- 1 (current)
- 2
- 3
- »
