4 sonuçlar
Arama Sonuçları
Listeleniyor 1 - 4 / 4
Öğe Electronic properties of Cu/n-InP metal-semiconductor structures with cytosine biopolymer(Polska Akademia Nauk, 2015-09) Güllü, Ömer; Türüt, AbdülmecitThis work shows that cytosine biomolecules can control the electrical characteristics of conventional Cu/n-InP metal-semiconductor contacts. A new Cu/n-InP Schottky junction with cytosine interlayer has been formed by using a drop cast process. The current-voltage (I-V) and capacitance-voltage (C-V) characteristics of Cu/cytosine/n-InP structure were investigated at room temperature. A potential barrier height as high as 0.68 eV has been achieved for Cu/cytosine/n-InP Schottky diodes, which have good I-V characteristics. This good performance is attributed to the effect of interfacial biofilm between Cu and n-InP. By using C-V measurement of the Cu/cytosine/n-InP Schottky diode the diffusion potential and the barrier height have been calculated as a function of frequency. Also, the interface-state density of the Cu/cytosine/n-InP diode was found to vary from 2:24 × 1013 eV-1cm-2 to 5.56× 1012 eV-1 cm-2.Öğe Barrier enhancement of Al/n-InP Schottky diodes by graphene oxide thin layer(Scientific Publishers, 2019) Güllü, Ömer; Çankaya, Murat; Rajagopal Reddy, VarraIn the present work, the surface morphology, structural and optical features of graphene oxide (GO) films are investigated. The Al/GO/n-InP MIS diode is formed by depositing GO layer on n-InP wafer for the barrier enhancement. Interfacial properties of the MIS diode with GO interlayer are extracted from current–voltage (I–V) measurement. The simple diode parameters such as barrier height and ideality factor are extracted from I–V plots, and the values are compared with those of conventional Al/n-InP MS contact. The value of barrier height (BH) for the Al/GO/n-InP contact is found as 0.85 eV. The BH value of 0.85 eV of the Al/GO/n-InP MIS structure is as high as around 100% compared to the value of 0.43 eV of the Al/n-InP reference contacts. We have showed that the value of 0.85 eV is one of the highest values presented for reference contacts with an interlayer.Öğe Electronic parameters of MIS Schottky diodes with DNA biopolymer interlayer(Walter de Gruyter, 2015-09-01) Güllü, Ömer; Türüt, AbdülmecitIn this work, we prepared an ideal Cu/DNA/n-InP biopolymer-inorganic Schottky sandwich device formed by coating a n-InP semiconductor wafer with a biopolymer DNA. The Cu/DNA/n-InP contact showed a good rectifying behavior. The ideality factor value of 1.08 and the barrier height (Φb) value of 0.70 eV for the Cu/DNA/n-InP device were determined from the forward ias I-V characteristics. It was seen that the Φb value of 0.70 eV obtained for the Cu/DNA/n-InP contact was significantly larger tan the value of 0.48 eV of conventional Cu/n-InP Schottky diodes. Modification of the interfacial potential barrier of Cu/n-InP iode was achieved using a thin interlayer of DNA biopolymer. This was attributed to the fact that DNA biopolymer interlayer increased the effective barrier height by influencing the space charge region of InP.Öğe Organik arayüzey tabakalı Al/CuPc /p-InP kontakların fabrikasyonu ve elektriksel parametrelerinin incelenmesi(Batman Üniversitesi, 2015-07-01) Aslan, Filiz; Güllü, Ömer; Ocak, Yusuf Selim; Rüzgar, Şerif; Tombak, Ahmet; Özaydın, Cihat; Pakma, Osman; Arsel, İsmailBu çalışmada termal buharlaştırma metodu kullanılarak bakır fitalosiyanin (CuPc) p-InP kristali üzerine kaplandı. Yine termal buharlaştırma sistemi kullanılarak oluşan ince organik film üzerine vakum ortamında alüminyum metali kaplandı ve Al/CuPc/p-InP diyot yapısı oluşturuldu. Al/CuPc/p-InP diyotunun oda sıcaklığında, karanlık ve aydınlık ortamda akım-gerilim (I-V) ölçümleri alındı. I-V grafiğinden bu yapının doğrultucu özellik gösterdiği görüldü. Aydınlık ortamda yapılan ölçümler 100 mW/cm2 ışık şiddeti altında yapıldı ve bu ölçümler doğrultusunda diyotun fotodiyot özellik gösterdiği görüldü. Ayrıca farklı yöntemlerle Al/CuPc/p-InP Schottky diyotunun karakteristik parametreleri ( idealite faktörü (n) ,engel yüksekliği (Φb) ve seri direnç (Rs) ) hesaplandı.
