5 sonuçlar
Arama Sonuçları
Listeleniyor 1 - 5 / 5
Öğe Electronic properties of Cu/n-InP metal-semiconductor structures with cytosine biopolymer(Polska Akademia Nauk, 2015-09) Güllü, Ömer; Türüt, AbdülmecitThis work shows that cytosine biomolecules can control the electrical characteristics of conventional Cu/n-InP metal-semiconductor contacts. A new Cu/n-InP Schottky junction with cytosine interlayer has been formed by using a drop cast process. The current-voltage (I-V) and capacitance-voltage (C-V) characteristics of Cu/cytosine/n-InP structure were investigated at room temperature. A potential barrier height as high as 0.68 eV has been achieved for Cu/cytosine/n-InP Schottky diodes, which have good I-V characteristics. This good performance is attributed to the effect of interfacial biofilm between Cu and n-InP. By using C-V measurement of the Cu/cytosine/n-InP Schottky diode the diffusion potential and the barrier height have been calculated as a function of frequency. Also, the interface-state density of the Cu/cytosine/n-InP diode was found to vary from 2:24 × 1013 eV-1cm-2 to 5.56× 1012 eV-1 cm-2.Öğe Electronic parameters of high barrier Au/Rhodamine-101/n-Inp Schottky diode with organic interlayer(Elsevier, 2012-01) Güllü, Ömer; Aydoğan, Şakir; Türüt, AbdülmecitIn this work, we present that Rhodamine-101 (Rh-101) organic molecules can control the electrical characteristics of conventional Au/n-InP metal-semiconductor contacts. An Au/n-InP Schottky junction with Rh-101 interlayer has been formed by using a simple cast process. A potential barrier height as high as 0.88 eV has been achieved for Au/Rh-101/n-InP Schottky diodes, which have good current-voltage (I-V) characteristics. This good performance is attributed to the effect of formation of interfacial organic thin layer between Au and n-InP. By using capacitance-voltage measurement of the Au/Rh-101/n-InP Schottky diode the diffusion potential and the barrier height have been calculated as 0.78 V and 0.88 eV, respectively. From the I-V measurement of the diode under illumination, short circuit current and open circuit voltage have been extracted as 1.70 μA and 240 mV, respectively.Öğe Electronic properties of Al/DNA/p-Si MIS diode: Application as temperature sensor(Elsevier, 2011-01) Güllü, Ömer; Türüt, AbdülmecitThe current-voltage (I-V) measurements were performed in the temperature range (200-300 K) on Al/DNA/p-Si Schottky barrier type diodes. The Schottky diode shows non-ideal I-V behaviour with ideality factors n equal to 1.34 ± 0.02 and 1.70 ± 0.02 at 300 K and 200 K, respectively, and is thought to have a metal-interface layer-semiconductor (MIS) configuration. The zero-bias barrier height Φb determined from the I-V measurements was 0.75 ± 0.01 eV at 300 K and decreases to 0.61 ± 0.01 eV at 200 K. The forward voltage-temperature (VF-T) characteristics were obtained from the I-V measurements in the temperature range 200-300 K at different activation currents (IF) in the range 20 nA-6 μA. The VF-T characteristics were linear for three activation currents in the diode. From the VF-T characteristics at 20 nA, 100 nA and 6 μA, the values of the temperature coefficients of the forward bias voltage (dV F/dT) for the diode were determined as -2.30 mV K-1, -2.60 mV K-1 and -3.26 mV K-1 with a standard error of 0.05 mV K-1, respectively.Öğe Electronic parameters of MIS Schottky diodes with DNA biopolymer interlayer(Walter de Gruyter, 2015-09-01) Güllü, Ömer; Türüt, AbdülmecitIn this work, we prepared an ideal Cu/DNA/n-InP biopolymer-inorganic Schottky sandwich device formed by coating a n-InP semiconductor wafer with a biopolymer DNA. The Cu/DNA/n-InP contact showed a good rectifying behavior. The ideality factor value of 1.08 and the barrier height (Φb) value of 0.70 eV for the Cu/DNA/n-InP device were determined from the forward ias I-V characteristics. It was seen that the Φb value of 0.70 eV obtained for the Cu/DNA/n-InP contact was significantly larger tan the value of 0.48 eV of conventional Cu/n-InP Schottky diodes. Modification of the interfacial potential barrier of Cu/n-InP iode was achieved using a thin interlayer of DNA biopolymer. This was attributed to the fact that DNA biopolymer interlayer increased the effective barrier height by influencing the space charge region of InP.Öğe High barrier Schottky diode with organic interlayer(Elsevier, 2012-03) Güllü, Ömer; Aydoğan, Şakir; Türüt, AbdülmecitA new Cu/n-InP Schottky junction with organic dye (PSP) interlayer has been formed by using a solution cast process. An effective barrier height as high as 0.82 eV has been achieved for Cu/PSP/n-InP Schottky diodes, which have good currentvoltage (IV) characteristics. This good performance is attributed to the effect of formation of interfacial organic thin layer between Cu and n-InP. By using capacitancevoltage measurement of the Cu/PSP/n-InP Schottky diode the diffusion potential and the barrier height have been calculated as 0.73 V and 0.86 eV, respectively. From the IV measurement of the diode under illumination, short circuit current (I sc) and open circuit voltage (V oc) have been extracted as 0.33 μA and 150 mV, respectively.
