28 sonuçlar
Arama Sonuçları
Listeleniyor 1 - 10 / 28
Öğe Investigation of low velocity impact behaviors of honeycomb sandwich composites(SpringerLink, 2018-08-09) Topkaya, Tolga; Solmaz, Murat YavuzHoneycomb sandwich composites are used as significant structural members in advanced engineering applications. Thus, it is critical to determine how they behave under impact loading, in addition to other loads. In this study, low velocity impact loading behaviors of honeycomb sandwich composites were experimentally investigated. Almost all of the design parameters of honeycomb sandwich composites were investigated. The results indicated that the core thickness of honeycomb had no effect on the strength of the composite, and the parameter influencing the impact behavior of the specimen the most was the face sheet thickness. When the face sheet thickness of the specimen was increased, the most apparent strength increase was observed in the models using carbon fiber-reinforced composite face sheets. For all face sheet types subject to impact energy of 10 Joules, the upper face sheets of 0.5 mm-thick specimens were perforatedÖğe A novel approach for spam email detection based on shifted binary patterns(Wiley-Blackwell, 2016-01-11) Kaya, Yılmaz; Ertuğrul, Ömer FarukAdvances in communication allow people flexibility to communicate in various ways. Electronic mail (email) is one of the most used communication methods for personal or business purposes. However, it brings one of the most tackling issues, called spam email, which also raises concerns about data safety. Thus, the requirement of detecting spams is crucial for keeping the users safe and saving them from the waste of time while tackling those issues. In this study, an effective approach based on the probability of the usage of the characters that has similar orders with respect to their UTF-8 value by employing shifted one-dimensional local binary pattern (shifted-1D-LBP) was used to extract quantitative features from emails for spam email detection. Shifted-1D-LBP, which can be described as an ordered set of binary comparisons of the center value with its neighboring values, is a content-based approach to spam detection with low-level information. To validate the performance of the proposed approach, three benchmark corpora, Spamassasian, Ling-Spam, and TREC email corpuses, were used. The average classification accuracies of the proposed approach were 92.34%, 92.57%, and 95.15%, respectively. Analysis and promising experimental results indicated that the proposed approach was a very competitive feature extraction method in spam email filtering.Öğe Synthesis, characterization and antioxidant activity of heterocyclic Schiff bases(Journal of the Chinese Chemical Society, 2020-08-04) Aral, Tarık; Dağ, Beşir; Kızılkaya, Hakan; Genç, Nusret; Erenler, RamazanSchiff base derivatives have gained great importance due to revealing a great number of biological properties. Schiff bases were synthesized by treatment of 4-amino-1,5-dimethyl-2-phenyl-1H-pyrazol-3(2H)-one (1) with various aldehydes in methanol at reflux. In addition, diamine was reacted with an aldehyde to yield the corresponding Schiff bases. The structures of synthesized Schiff bases were elucidated by spectroscopic methods such as microanalysis, 1 H-NMR, 13C-NMR, and FTIR. Antioxidant activities of synthesized Schiff bases were carried out using different antioxidant assays such as 1,1-diphenyl-2-picryl-hydrazyl free radical (DPPH• ) scavenging, 2,20 -azino-bis (3-ethylbenzthiazoline-6-sulfonic acid) (ABTS) radical scavenging, and reducing power activity. (E)-4-((1H-indol-3-yl)methyleneamino)-1,5-dimethyl-2-phenyl-1H-pyrazol-3(2H)-one (3), (E)-1,5-dimethyl-4-((2-methyl-1H-indol-3-yl) methyleneamino)-2-phenyl-1H-pyrazol-3(2H)-one (5), (E)-1,5-dimethyl-2-phenyl-4-(thiophen-2-ylmethyleneamino)-1H-pyrazol-3(2H)-one (7), (E)-1,5-dimethyl2-phenyl-4-(quinolin-2-ylmethyleneamino)-1H-pyrazol-3(2H)-one (9), (1S,2S, N1,N2)-N1,N2-bis((1H-indol-3-yl)methylene)cyclohexane-1,2-diamine (11), and (1S,2S,N1,N2)-N1,N2-bis((2-methyl-1H-indol-3-yl)methylene)cyclohexane-1,2-diamine (12) were synthesized in high yields. Compound 5 displayed a good ABTS•+ activity. Compound 3 revealed the outstanding activity in all assays. Compound 7 has the best-reducing power ability in comparison to other synthesized compounds. Although compounds 5, 11, 12 are new, compounds 3, 7, 9 are known. Due to revealing a good antioxidant activity, the synthesized compounds (3, 5, 7) have the potential to be used as synthetic antioxidant agents.Öğe Analysis of spheroidized AISI 1050 steel in terms of cutting forces and surface quality(Slovenska Akademia Vied, 2016) Baday, Şehmus; Başak, Hüdayim; Güral, AhmetIn this study, the effects of microstructure differences obtained with the application of different spheroidizing heat treatment cycles on medium carbon steel on cutting forces and surface roughness values were investigated. For this purpose, a group of AISI 1050 materials was annealed at 700°C below Ac1 temperature for 720 min and cementite phases were spheroidized by the traditional method. Another group of materials was quenched after austenitization at 850°C for 15 min and then cementites were spheroidized in the ferrite matrix by over-tempering separately at 600°C for 15 and 60 min and at 700°C for 60 min. Machining of the samples was tested under dry cutting conditions in CNC turning center with SNMG 120408 cementite carbide cutting tool and proper PSBNR 2525M12 tool holder with 75-degree edge angle. Cutting forces of traditionally spheroidized samples were lower than the samples spheroidized after quenching. In addition, their cutting forces decreased due to the increase in the average sizes of spheroidal cementite. Minimum surface roughness value was obtained from the samples which were spheroidized at 600°C for 15 min after quenching. However, surface roughness rate of the sample increased as spheroidizing time increased.Öğe Improvement of diode parameters in Al/n-Si schottky diodes with coronene interlayer using variation of the illumination intensity(Elsevier, 2017-12-15) Pakma, Osman; Çavdar, Şükrü; Koralay, Haluk; Tuğluoğlu, Nihat; Yüksel, Ömer FarukIn present work, Coronene thin films on Si wafer have been deposited by the spin coating method. It has been ultimately produced Al/Coronene/n-Si/In Schottky diode. Current–voltage (I-V) measurements have been used to determine the effect of illumination intensity in the Schottky diodes. The barrier height (ΦB) values increased as ideality factor (n) values decreased with a increase in illumination intensity. The ΦB values have been found to be 0.697 and 0.755 eV at dark and 100 mW/cm2, respectively. The n values have been found to be 2.81 and 2.07 at dark and 100 mW/cm2, respectively. Additionally, the series resistance (Rs) values from modified Norde method and interface state density (Nss) values using current-voltage measurements have been determined. The values of Rs have been found to be 1924 and 5094 Ω at dark and 100 mW/cm2, respectively. The values of Nss have been found to be 4.76 × 1012 and 3.15 × 1012 eV−1 cm−2 at dark and 100 mW/cm2, respectively. The diode parameters are improved by applying the variation of illumination intensity to the formed Schottky diodes.Öğe Biodiesel properties of microalgae (Chlorella protothecoides) oil for use in diesel engines(Taylor & Francis, 2018-09-08) Yaşar, Fevzi; Altun, ŞehmusIn this study, biodiesel was produced from a microalgae oil, chlorella protothecoides, by typical alkali-catalyzed transesterification in conditions such as a 0.75 wt.% KOH of the oil as catalyst, 68°C and 80 min which was agreed as optimal conditions after investigating the effect of KOH concentration, reaction temperature and time at constant molar ratio of 6:1 on the conversion rate and fuel properties. Under these conditions, a 98.6% conversion rate of algae oil to its methyl ester was achieved with ester content higher than 96%. Furthermore, all physicochemical properties met the requirements of international biodiesel standards, EN 14214 and ASTM D 6751, with some remarkable ones such as high cetane number (57.3) and low CFPP (−10°C). The effect of microalgae biodiesel volume fraction in the fuel on the kinematic viscosity, CFPP, lubricity, density, and distillation temperature was also studied. A blending ratio of the algal-biodiesel up to 50% (v/v) was also found in agreement with the standards for biodiesel-diesel blends. From GC analysis, oleic and linoleic acids were found to be major fatty acids, and then the oxygen extended sooting index and adiabatic flame temperature were calculated using fatty acid distribution for evaluating the main diesel emissions such as soot and NO. As a result, the algae oil studied here was found to be an appropriate raw material for producing biodiesel and for using in Diesel Engines and its properties are within the typical ranges of conventional biodiesel fuels.Öğe Strength and failure analysis of inverse Z joints bonded with Vinylester Atlac 580 and Flexo Tix adhesives(Springer, 2012-11) Adin, Hamit; Turgut, AydınIn this study, the tensile strength and failure loads of the inverse Z joints were analyzed both experimentally and numerically by using two adhesives with different properties under a tensile load. Vinylester Atlac 580 and Flexo Tix were used as adhesives and the joints were prepared with two different composite materials. Initially, the mechanical properties of the adhesives were specified using bulk specimens. Then, the stress analyses were performed using three-dimensional finite element method (3-D FEM) via Ansys (V.10.0.1). The experimental results were compared with the numerical results and they were found quite reasonable. According to the test results, it can be seen that when the adherend thickness is increased, the stress increases as well. The most appropriate value of the adherend thickness is identified as t = 5 mm. Furthermore, it was observed that the lowest failure load was obtained at t = 3 mm the thickness for each specimen.Öğe Callus induction and plant regeneration from different explants of actinidia deliciosa(Springer Nature, 2008-10-31) Akbaş, Filiz; Işıkalan, Çiğdem; Namlı, SüreyyaIn this study, an efficient procedure was developed for callus induction and regeneration of kiwifruit (Actinidia deliciosa) using different organs of shoots developed under in vitro conditions. Effects of explants source and media (M1, 1.0 mg l-1 BA + 2.0 mg l-1 2,4-D-M 2, 1.0 mg l-1 NAA + 2.0 mg l-1 2,4-D) on initiation of callus were examined in order to obtain callus for organogenesis. The best callus for plant regeneration was obtained from leaf explants on Murashige and Skoog's medium (MS) supplemented with M2. Formation of callus from leaf of kiwifruit (A. deliciosa) was cultured in MS medium containing different concentration of N6-benzylaminopurin (BA; 0.0, 1.0, 2.0, 4.0, 6.0, 8.0 mg l-1) for callus proliferation and plant regeneration. Although the first shoot formation was appeared in medium containing 6.0 and 8.0 mg l-1 BA, the best shoots formation was obtained in medium with 4.0 mg l-1 BA.Öğe Gender classification from facial images using gray relational analysis with novel local binary pattern descriptors(Springer Nature, 2016-11-18) Kaya, Yılmaz; Ertuğrul, Ömer FarukGender classification (GC) is one of the major tasks in human identification that increase its accuracy. Local binary pattern (LBP) is a texture method that employed successfully. But LBP suffers a major problem; it cannot capture spatial relationships among local textures. Therefore, in order to increase the accuracy of GC, two LBP descriptors, which are based on (1) spatial relations between neighbors with a distance parameter, and (2) spatial relations between a reference pixel and its neighbor on the same orientation, were employed to extract features from facial images. Additionally, gray relational analysis (GRA) was carried out to identify gender through extracted features. Experiments on the FEI database illustrated the effectiveness of the proposed approaches. Achieved accuracies are 97.14, 93.33, and 92.50% by applying GRA with the nLBPd, dLBPα, and traditional LBP features, respectively. Experimental results indicated that the proposed approaches were very competitive feature extraction methods in GC. Present work also showed that the nLBPd, dLBPα methods were obtained more acceptable results than traditional LBP.Öğe Synthesis and anticorrosion studies of 4-[(2-nitroacetophenonylidene)-amino]-antipyrine on SAE 1012 carbon steel in 15 wt.% HCl solution(Taylor & Francis, 2020-11-16) Gerengi, Hüsnü; Çakmak, Reşit; Dağ, Beşir; Solomon, M. M; Tüysüz Akbal, Hatice Aslıhan; Kaya, ErtuğrulA novel corrosion inhibitor, ((E)-1,5-dimethyl-4-((1-(3-nitrophenyl)ethylidene)amino)-2-phenyl-1,2-dihydro-3H-pyrazol-3-one) (DNPP) was synthesized in high yield by the condensation reaction of 4-aminoantipyrine with 2-nitroacetphenone derived from acetophenone as a starting material and characterized by FT-IR, 1H, and 13C NMR techniques. DNPP was tested against the corrosion of SAE 1012 carbon steel in 15 wt.% HCl solution using electrochemical and surface characterization techniques. Results obtained show that DNPP is effective in retarding the corrosion of SAE 1012 carbon steel. With 4 mM of DNPP, the charge transfer resistance of SAE 1012 in 15 wt.% HCl solution is raised from 17.42 to 140.50 Ω cm2 and the substrate surface is protected by 87%. The inhibition is through adsorption mechanism (mixed-adsorption type) and has been confirmed by SEM and EDAX results. Potentiodynamic polarization results reveal that DNPP acted as a mixed-type corrosion inhibitor. DNPP is a promising candidate for the formulation of an inhibitor cocktail for the strong acid environment.
- «
- 1 (current)
- 2
- 3
- »
